After buying and installing the interior door, there is a need for a castle to cut, which can tightly close the doors and fix them. Naturally, there are already doors with a built-in lock, but they cost quite expensive. There are those doors in which there is no such castle, and it must be built. Or the doors are rather old, but suddenly it urgently needed a castle that a lot of problems will be able to solve.
Installing the lock on the door will independently come up cheaper than buy the door with the already built-in lock.
Few people know how to embed the castle in the interior door on their own. You need to know a few simple rules.
How to choose the lock
In order for the castle to be harmonized in the interior, it should be combined with color and texture with the rest of furniture. But if it is not fundamentally, you can buy a simple castle that does not attract any attention and will not spoil the design of the room.Next, the lock will need to be installed in the doorway. To install the lock, you can call a special master, which will ask for a very round sum, or you can do everything yourself without loss of finance that you have to lay out for the castle in the interior door. Therefore, we consider how it is correct and just embed the castle without the help of unauthorized persons.
Classification of door locks.
The castle itself should be studied in detail when buying in order for not marriage. In recent years, it has become much difficult to choose such a simple item like a castle. After all, manufacturers have become more and more expanding their assortment and variety of models. But you can be repelled from simple and standard models to which everyone is used to. There are several types of them:
- Castles can be both with handles, and without them;
- Another type of castle is a lock-latch, which has a rounded shape; The castle is located on the handle itself, which is very convenient.
In addition, each castle has its own feature when installing. Do not forget about it. After selecting the lock, be sure to think about each step, the level of difficulty installing it and the presence of tools that will be installed in the installation of a protective device into interroom doors. There are few such tools, and they can all be in the house.
Article on the topic: Wall painting methods: Coloring methods
Tools and Material for Work
Required materials and tools for cutting lock - this is:
For the insertion of the lock in the door will need a special set.
- the castle itself;
- the door in which you will embed it;
- electric drill;
- Some drills that work only with wood material, it can be a drill bit or a crown;
- In order to celebrate a wooden surface, be sure to take a pencil or color chalk, which will be visible on the tree surface;
- Do not forget the ruler;
- centimeter or roulette, which is so convenient when measuring high and long items, because without it, do not measure accurate centimeters that will help correctly install the castle;
- In addition to the office, we will still need the chisels, they will be required to create grooves in a wooden door;
- still need a special joiner knife;
- a small hammer that is convenient to work;
- Fire and the most ordinary screwdriver that is at hand.
Before the start of the lock in the door, the corresponding measurements must be made.
After the preparation of all items for the insertion of the locking well, it should be carefully measured and thought out. After all, the doors are now created from a variety of materials. With a wooden door, there will be no problems, this is the best material that is amenable to any effect, and is even easily and easy to work with laminated interroom doors. But with the door, which is created from now popular MDF, will be more difficult. And if the door is created from this material, then it is necessary to pay your close attention to the fact that there is another piece of wood in the door, which is mounted on the meter from the floor height.
Detailed instructions for work
Step-by-step instructions for self-installing interroom castle is quite simple and accessible to any person.
Scheme of the stages of the lock in the castle.
- To begin with, you should remove the interior door with the loops and omit on the floor, putting it on the vertical loop down. The door should be put there, where much space to approach it from either side. After all, it will be much more convenient to work with a door, where there is more space and approaches to it.
- Next, we take our ruler or roulette, measuring the height from the castle from above and below, we note the pencil centimeters on the door. We must have a rectangle. It can be both long and small, it all depends on the diameter of the castle.
- After we marked the segment of the door, where the lock will be set, it is necessary to make a seizure of a feather drill, where the core core itself will be installed. The main thing is not to hurry and drill in a little bit, periodically measuring the recess with the lock. But the main thing is to pay your close attention to the diameter of the drill that you will do. The diameter of the drill must necessarily be the same as the thickness of the lock itself, and its recess should not have differences from the locking device. After all, then he can simply come.
- By placing the door of the sketch of the reference lock on the end of the door, in the outline, create a smaller and accurate area with the help of the chisel. Where the door handle will be equipped, with the support of the drill of the feather species, very accurately and slowly create a deepening. It should be done very carefully and try not to drill a wooden door through. Created recess should be put into the course for the center of the castle. And further drilling to do from the other side.
- After finishing the cooking of the lock, try it on. If everything is suitable, you should install it and attach to the self-drawing, which were prepared earlier, if something interferes, you need to remove too much and try again. Self-tapping screws should be twisted into spaces that are made when creating a lock with a screwdriver. They screw in fairly easy and simple.
- Next comes the final process of installing the lock to interior doors. To complete work with the door, you must insert the handles into the holes and put the door back to the loop.
- If the handles hang out or are installed, it is necessary to make special strengthening for them from both sides. Only decorated overlays will be needed to install the arms of the arms, which are flipped with simple self-drawing. These simple details will help tightly press the handles to the door and do not give them to be broken when used. Next, it is necessary to make the fixation of the rod, which connects them.
- After that, it is necessary to close the interroom door and outline the location of the lock tongue for the further accurate installation. It is necessary to measure the length of the tongue itself, which will continue to fix the door, keeping the door jamb.
- Next, we carry measurements on the door cant with a pencil or chalk. To the outlines that we set, you should attach a lining that will accept and complete the entire door closure. Tightly pressed to the door jamb, we supply it. Then drill the location where the lining will be installed, and bring it to perfection by the chisel, periodically applying the lining for accurate cutting. Sended under the uniform, we take a screwdriver and screw it with simple self-drawing in the recess, which were cut out there when creating a lining.
Article on the topic: Vintage doors: Photo Overview and Methods of manufacture
And now there has been a long-awaited miracle: the castle in interior doors is equipped and ready to use.
But it is not necessary to rejoice hard.
The main thing is to study it once again now during the period of operation, revealing all the shortcomings and eliminating them.
After all, when performing and installing, you can not notice some details that will continue inconvenience when using the lock. It may not be until the end of twisted screws that will interfere with closing and opening the door, or loosely fixed knobs that will be fused and may eventually fall off. You should check the fixation of the lining and the screws that hold it.
Let's sum up
Set the lock to interior doors is not so difficult, everything is quite simple and easy. This can make anyone, principal, readiness and hard work, accuracy and slowness. It is necessary to prepare all the necessary tools in advance and pick up the castle, which will serve as protection against unreasonable guests, which may not fit the room in time. Therefore, do not scare handmade and learn. After all, everything is complicated - just. The main thing is to study the problem from the inside and eliminate it, while taking the huge agents and nervous cells, which will be useful in the future.
When installing the castle, attentiveness, excerpt and diligence, which are rewarded with silence and tranquility from various irritant factors. After all, any work is rewarded.