Imagine the situation: your new acquisition, your pride is plastic door - stopped closing. After installation made by employees of the company, there were some doubts in the correctness of the installation. The design was closed with some distortion, the castle is broken or closed only if the application is applied. What to do? Again to cause the same "workers"? No, you need to do once and conscience.
How to remove the door?
In the process of repair, you may need to remove the cloth with the loops, and how to do it? Now let's tell! To start a little theory.
General device
The material used for the manufacture of doors is polyvinyl chloride. Plastic is an indispensable material in terms of water resistance. Moisture threatens the outer and interior doors. With outer doors it is clear, it is direct contact with the humidity of atmospheric air, and the condensate of internal evaporation.
Interior doors face particularly humid conditions in the kitchens and bathrooms. Of course, plastic is only a coating, steel plates are attached inside the design. In addition to the canvas itself, the kit includes a unintended door frame. (PHOTOS) In order for the door to perform the functional requirements, it is necessary to have a special type of parts in the door design of the fittings.
Loops.
Input plastic structures are quite severe, because they have a multi-chamber structure and protection against hacking. In this regard, with other features of the device of this species, special hinges are used to connect the web with a box. This is the main part of the fittings, the main detail of the plastic door design. The loop is divided into:
- removable;
- non-removable;
- scrape;
- card;
- Invisible.
The name of the screw loop itself, along with the overhead and applied, speaks about the method of fastening the loops to the door.
The loops for plastic doors are made of particularly durable materials, based on Teflon. In addition, the loops carry a load from the doorway, they must provide easy doorway, and tight fit of the canvas to the box.
Article on the topic: Replacing the upholstery on the entrance door in the apartment
The loop itself consists of three parts:
- Detail fastening to the door, with a metal tab;
- frame detail with built-in pins;
- Remote sleeve, transmits the load from the door to the box.
The thoughtful design of the structure allows maintenance of loops without much effort. Periodic lubricant of ball bearings included in the design of the loop, extend the life of this type of fittings. But despite the reliability of the design and strength of materials used for the manufacture of loops, there are cases of damage to the product. The breakdown is mainly due to the factory marriage.
Castles and latches
According to GOST 5089-2003, the locks must perform the function locking the doors, and have the necessary security properties. Latches are designed to fix the doors in a closed position.
Many faults of plastic doors are associated with breakdown or marriage of fittings. The accessories of plastic doors are arranged so that in many cases, closing problems, fittings are adjusted without removing doors with loops. In general, there are many causes of malfunction, for example, a seal was worn out, and with a tightly closed door, there is a draft. They broke the lock, does not hold the handle.
When there was a need for a procedure, to replace the loop or other accessories, which requires mandatory removal of the web with loops, it is necessary to establish what type of product is used for this design.
Remove with loops.
The main requirement when working with a plastic door, is caution in handling accessories, in particular with hinges. With rough circulation, breakdown is possible.
Tools need the most ordinary:
- Screwdrivers - Cross and straight;
- set of hexagons;
- Passatias or sideness;
- Dobochnik;
- Mount.
The process is happening like this:
- Remove the balcony plastic door with loops. The loops can be both two and three.
- If the loops are removable, then the procedure is to lift the canvas with a partial door for several centimeters, any lever.
- Loops with decorative elements can only be removed by unscrewing the bolt located at the top of the loop.
- If the loops have adjusting bolts, then when removing you need to unscrew them.
- Yet the device loops for plastic doors, have differences from loops for wooden doors.
- The first thing to do is to open the loop mechanism, which is protected by decorative elements. Most often, caps are used as protection.
- Cover the door (without turning the handle), with a closed door, it is impossible to remove the web.
- The top protruding pin, this is an axial cylinder, it must be poured down. Pliers or rank pull down the cylinder.
- Tilting the door to herself, pull it behind the top and handle. We raise the door to free up the pin of the bottom loop.
Article on the topic: Warm floor in a wooden house: species and country appliances, electric heated air, private house
Finally, removing the lower cylinder, and raising the door again, remove from the loop. The process is shown in detail on the video.