Children's holidays are accompanied by parents with a headache associated with the selection of a stylized costume. In this case, you can do with small forces and suggest the child to feel like a cowboy. Just choose a vest and build a cowboy hat into her. At the same time, the cowboy hat is done literally in a few hours.
Cowboy headdress
Economic over time making cowboy hat - make such a miracle using paper. Since this material is rather continuing, you will have to handle the carnival accessory carefully.
In the work on the product it will be necessary:
- Large tight paper sheet;
- Toilet paper;
- Brown paint;
- Brush or sponge;
- PVA glue;
- Scissors;
- Pencil;
- Pair of shoelaces;
- Clamp for shoelars.
Before starting work, the child's head circumference should be measured. Using the resulting measure, a pattern of a future hat is built.
When constructing, it should be noted that from two edges of the head of the head-up must be slightly concave, and the fields of the sides of the sides have a smaller width than in front and rear.
Pattern of paper is cut. The obtained parts are glued together in the following order: Tula is connected to the hats fields, then the bottom is glued.
On the inside of the work, two lace are recorded with glue.
Now it follows to "drape" the finished base of the product using the toilet paper. A small segment of hats is treated with glue. Pre-torn to pieces or chaotic toilet paper is fixed on the adhesive basis.
This technique is carried out over the entire surface of the product. As it should look like this, is demonstrated in the photo.
It should be done well to dry the glue and you can start painting.
During staining, it is not recommended to use a large amount of water, in order not to let the upper layer of paper.
The product is subjected to a final dryer.
Article on the topic: Simple and beautiful crochet napkins with knitting schemes
It remains only to rinse on the shoelaces prepared in advance clamp, and the cowboy accessory is ready.
Bring brightness
Cowboys love to dress not only boys, but also girls. If we tie to the base of the cowboy headdress the satin tape of a bright color, and the vest to decorated with a lace, harmonizing with her, then such a suit is ideal for a girl.
A completely "Girl" cowboy hat will look, if you make it a two-layer, where satin fabric is the top layer. Only here it is necessary to take into account that no paper is involved in the work, and cardboard.
The pattern is used similar. All the difference lies in the fact that the parts of the hat cut from the cardboard are pre-(before their bonded) paste fabric. For this, the cardboard is missed by glue and leaves for a few minutes, giving glue the opportunity to grab a little.
Then the fabric is superimposed on cardboard blanks and gently under them is painted, in order to avoid folds.
From the edge of the patterns retreats approximately 2 cm and tissue parts are cut. The allowed points on the material are torn according to the corresponding depth. Small squares should be obtained, with the help of which the fabric will be glued.
Punches are rejected on the opposite side of the parts and are fixed there with glue.
For strength, you can walk glue already on the tissue allowance itself. Subsequent actions are similar to the above master class.
Origami in cowboy style
Sometimes there is no need for the manufacture of a suit for a children's matinee, and the child just decided to play cowboys with his friends. In this case, a way of making a cowboy hat for a boy in Origami technique is suitable.
To do this, you will need a sheet of paper with a size of 15 * 15 cm. You should add it diagonally.
One sheet to bend to the bottom edge is carried out, then parsing. Thus, the visible line is formed.
Article on the topic: Bag for lunch and food with your own hands
The right angle should be translated into the left side so that the top of the angle comes into contact with the edge of the bend formed earlier.
The left angle is similar to the same way, but already to the right edge of the line.
The top corners of the sheet are rejected by the middle of the workpiece, but in different directions.
The resulting figure turns over in such a way that the wide part is lower.
In the upper side of the workpiece with the help of diagonal folds, a triangle is formed.
Further, the figure is folded in half along the vertical line, and the fold becomes convex.
From the reverse side of the workpiece, the sheet should be bent at the bottom, and the upper folds to take inside.
To continue the work, it is advisable to turn the sideways figure to yourself.
The lower corners alternately bend upstairs, forming triangles.
On the right side you need to carefully pull the white edge of the sheet. A similar action is made with the left half of the figure.
The main fold is sprinkled from the bottom. Cowboy hat ready.
You can provide the child to decorate the headdress yourself, giving him multicolored markers. Cowboy accessory love to wear not only children, but also adults. For them, hats are usually carried out in a more complex technique with the use of quality materials.
Those who wish to acquire such a headdress of their own production to help are offered video with detailed instructions.