How to paint the walls in the bathroom instead of tile

Wall-shaped walls in the bathroom climbed OKOMIN. Yes, it is convenient and practical, but the atmosphere is far from home and in winter in such a room is frankly cold and uncomfortable. Increasingly looking for an alternative way to finish. And one of them is painting the walls. But the paint for the bathroom should have certain characteristics. About what paints can be used in the bathroom and talk on.

How can you paint the bathroom

You can paint the walls in the bathroom in different ways. Some choose a combined finish option - a shower cabin or part of the wall near the bath is finished with a cafeter, everything else is painted. In this case, the choice of paints is greater, since many easily carry high humidity, but not everyone is withstanding the effects of hot chlorinated water.

How to paint the walls in the bathroom instead of tile

Only part of the walls can be painted in the bathroom.

If you don't even like the tile in limited quantities categorically, you can cheat - separate the colored walls in the area of splashes with glass or transparent sheet polycarbonate.

Painted walls in the bathroom can be protected with glass or polycarbonate panels

Not necessarily close all the walls completely

Designer approach))

Many still have concerns about whether it is possible to hang the heated towel rail on the painted wall. Answer - you can, there are no restrictions and there will be no consequences either. Next, about what paints you can paint the walls of the bathroom.

What kind of paint can be used in the bathroom

For wet rooms, it is not all paints and in the case of the bathroom still requires a high detergent. Types such types:

Latex. One of the types of water-level paint. Forms a dense film on the surface, it is well applied, it serves a long time, but has a high price and requires ideal surface preparation.
Silicone or acrylic water-based emulsion. These paints are a good choice for painting the bathroom. Middle price range, good resistance to water exposure.

Waterproof bathroom paint can be different
Alkyd enamel. It has a low price, good water resistance, but is produced based on organic solvents, respectively, has a strong smell. Another minus - the air does not miss the alkyd enamel of the wall.
Oil. All long-known bathroom paint, which is becoming increasingly popular - has a strong smell, serves for a short time (it starts to peel or swell).

Often even recommended chloride paint. Yes, it creates a waterproof coating, as it was designed for pools. But it can only be operated at a temperature not higher than + 27 ° C. It makes sense to use it in the zone of water splashes in the zone, since after drying it is the resulting film is more like rubber than on the paint and does not pass water or the air. But here is the likelihood that the water will get warmer than you need. How does this paint behave or that it will start to allocate not voiced, but it is hardly worth risking, since its value is high, and the results of the application are dubious.

The combination of tiles and paints in the bathroom - beautiful and practical

As you can see, there is a choice, but there is no ideal version. Everywhere there are its cons. In general, the paint for the bathroom has any serious manufacturer and often not alone. If there is no direct indication that it is intended for the bathroom and kitchen, it is written "washable" and "waterproof" or "moisture resistant". Feast Selection Pay attention to the number of passes with a brush (it should also be written). This figure is measured in thousands and how it is more, the better. The minimum for the walls is 3000 passes, but most of the good compounds blocks this figure many times. For example, Livna PS-285 withstands 20,000 passes with a soft brush. That is, according to the characteristics, it is close to Tikkurila, but it is cheaper at times.

Latex paint: characteristics

Latex can be natural and synthetic. Latex paints are made on the basis of natural latex - rubberos juice. These particles are dissolved in water and do not form rigid ties. As water drying out on the surface, an elastic waterproof film is formed. The advantages of her are:

Easy to apply.
Quickly dries.
Virtually odorless.
The coating is resistant to abrasion.
Durable.
Easily clean.
May be cared by various pigments.

Paint roller or brush is applied. For a normal score, it is desirable to apply 2 layers. To reduce the consumption of paint, it is desirable to pre-primed the surface.

Some latex paint brands for the bathroom

Disadvantages there are also:

To paint look good, the perfect preparation of the walls is necessary - the thin film will emphasize all the flaws.
Not suitable for unheated premises. Lower temperature threshold + 10 ° C.
Before the painting wall must be treated with anti-grapple compositions.
High price.

Mostly latex paint for the bathroom is not bought due to a high price. If you look at the price of the liter and there. But it is necessary to take into account that the flow of this paint is very small, so you will need to buy a small amount. The second moment, which must be taken into account - the painted surface does not change its appearance for a long time. With it, literally nothing happens for years. So "expensive" is relatively relatively.

Another point: if you want to have a "silk" shine on the walls of the bathroom, you need a latex paint. No other gives this effect.

Acrylate (acrylic or polyacryl)

Acrylate is one of the types of latex paint. As the basis, one of the types of synthetic rubbers is used - acrylate, which is why the composition was obtained. The properties of acrylic paint for the bathroom can be called optimal:

Weak and unstable smell when drying and its complete absence after.
Moisture resistance. When water gets into the dried surface, nothing happens. The dried acrylic does not dissolve, does not enter into any reactions.
Parry permeability. The dried composition does not interfere with gas exchange.
Good adhesion (grinding with a stainable surface).
Can be used at high and low temperatures. If you are looking for waterproof paint for a bath - this is a good choice.
Does not fade under the influence of ultraviolet.
High resistance to abrasion. Anti-vandal coatings are made from acrylic paints.
Safety. Does not contain salts of heavy metals and organic solvents.
Without explicit smell.

If you need a bright and deep color - your choice of acrylic bathroom paint. Moreover, this color is preserved a very long period of time. An additional bonus is the versatility of the composition: it can be applied to concrete, metal, glass, stone, plastic, brick, plaster.

Acrylic bathroom paint - a wonderful solution to the problem

Disadvantages of acrylic paint also worth knowing:

Long drying time.
Low dry residue (about 30%), which means that the film is fine and requires good surface preparation.
On top acrylic paint lies only acrylic. If you want to change, you have to completely remove it.

In general, the acrylic paint for the bathroom is a good choice. Painted walls in the bathroom will save their color for a long time.

Silicone water dispersion

Silicone paint, as well as latex and acrylic, belong to the water-emulsion formulations. This means that it also does not smell and is well applied. However, has its own characteristics. Here is its advantages:

Good adhesion. It can be applied to concrete, putty, brick, wood, stone, etc.
Does not require an ideal surface, hides roughness, small cracks.
Can be used at high and low temperatures.
The film repels water, but passes couples and gas. That is, walls or ceiling covered with silicone paint "breathe".
Prevents the development of fungi and microorganisms.
Easy wash.
It tolerates the effect of sunlight well.
Long service life (up to 25 years).

If you need such a bathroom paint to the walls and ceiling "breathe" - choose silicone paint. It is good in problem areas where there is a mold or fungus.

Silicone bathroom paints - good choice

Disadvantages also have:

Price. Not the cheapest paint. But looking at the service life, you understand that the costs are justified.
This paint is undesirable to use for metal: it is vapor-permeable, which leads to the fact that the metal is quickly rust. When staining reinforced concrete, measures are required to protect fittings - impregnation with anti-corrosion compositions.

Silicone paint is applied, like any water emulsion, roller or brush. To reduce the expense of the cheap composition, the surface is preferably pre-primed. Soil should also be silicone based. Works begin with a plus temperature (usually above + 5 ° C) and normal humidity. Apply the composition should be on pure dry walls or ceiling.

Alkyd enamel

This kind of paint can be used not only for the bathroom, but also for external or internal works. The main disadvantage is a strong smell when applied and drying, as the solvent - White Spirit. Alkyd enamels of domestic production are often toxic, so it is necessary to work in a ventilated room and better - in the anti-gas respiratory. Also, the composition may include a filler (a very thin stone crumb or sand), antibacterial or antiseptic additives may be pigment to give color.

Advantages of alkyd enamels:

High strength of the film.
Resistance to aggressive media.
Short duration of drying.
Low price.
Not bad adhesion.
Does not turn yellow and does not crack.
Wide temperature range of application.

When choosing it is better to stop your choice on imported products. The price is significantly different, but also quality too. The most important thing is that imported alkyd enamel smells significantly less and definitely non-toxic.

Alkid enamel - all good, but strongly "smells"

Disadvantages mostly have already voiced: smell and toxicity, but there are still unpleasant moments:

The surface covered with alkyd paint does not let air and steam, so that the ventilation system in the bathroom should be effective.
In order for the bathroom, the fungus does not appear, the preliminary protection of the base is necessary.

Alkid enamel has two forms of release: standard - in banks, as well as in aerosols. Aerosols are more universal - can be applied on any surfaces, they also easier to paint hard to reach places, but cost more.

Oil paint

Oil paints are made on the basis of olifes or synthetic oils. The compositions on the olife are considered the best, but they are more expensive. Minerals are added to the flour, which is responsible for the color of the coating. These particles are insoluble, and since they are heavier oils, then settle on the bottom. Therefore, before applying and during operation, paint must be mixed. The advantages of this type of paints:

Low price.
Waterboardproof coating.
Well falls on a properly prepared surface.
Good adhesion.
Can be used for metal and wood staining.

If you need inexpensive bathroom paint - this is your option. It is only worth considering that the service life of such coatings is very small: in places of direct contact with water, bubbles are quickly formed, the paint begins to crack and peel.

Oil colors - the cheapest but not the best option

Disadvantages of oil paint:

The composition includes organic solvents, because the smell to drying is strong and resistant.
Evaporation can be toxic.
Fewer colors due to the use of only mineral pigments.
Long drying period - at least 6 hours. Throughout this time, the paint "smells".
After some time, the paint changes the color (yellow shade is added). The sun quickly burns out.
In the wet zones cracks, peeling.

The combination of these qualities leads to the fact that oil paints are used more and less. It does not save even a low price, so you have to update the coating almost every year. At the same time, the normal form is preserved throughout the last months. In general, it is the most unsuccessful paint for the bathroom from all described.

What kind of paint can be advised

Even by choosing the type of paint that you want to use in your bathroom, choose a specific brand not easy: a lot of different offers. Therefore, it is easier to focus if there are recommendations for those who already have some experience of operating painted walls in the bathroom. Here are some paints have good reviews:

Caparol Capamix Samtex 20 (latex paint).
Livna PS 285. Washing paint for high-loaded walls (use not in the zone of water ingress).
DULUX ULTRA Resist (acrylic).
Benjamin Moor (Benjamin Moore) Kitchen & Bath Satin Finish (acrylic); Aura Interior Matte Finish (Silicone).
Rainbow Extra (acrylic).
Tikkurila (Tykkurila). There are several options for Luya 40 (acrylate for wet rooms), Luya 7 (acrylate washable for zones with heavy load), EURO EXTRA 20 (half-one),
VGT Kitchen and Bathroom IQ130 (acrylic).

There are many other paints, but these have already enjoyed in the bathrooms, so they are already tested. Basically, these are acrylic paints, others use, apparently, less often, as they cost more. All of them give a matte or semi-wave surface - this is the latest trend in design. The advantage of such a choice will be that the defects of the surface (if any) are not so striking, like on painted glossy and peeled colors.