Photo
Flowing over how to glue relief vinyl wallpaper, it is necessary to take into account that they are divided into heavy canvas and lungs. The existing difference between them is quite noticeable. The poor throughput of cloths from this material of water vapor was the reason for the fall of demand for vinyl. This affects primarily on the climate indoors. The environment takes every second of evaporation not only from the body of a person, but through the air exhaled by it, and if the wall covering does not miss the water pairs accumulating in the air, the dampness is accumulated in the room on all walls. Taking into account the fact that the focus of installed windows from PVC is deaf, as well as in interroom doors, it leads to the appearance of mold.
Designation scheme icons on wallpaper.
Glue heavy vinyl web is much easier than thin, which require more thorough preparation of the wall surface. Therefore, the walls are usually needed to be splashing, to sprawl and predict, making them perfectly even. No convexities should rush into the eyes. If there will be inclusions under the glued cloths, it will not be how to spoil the view of the interior, as on thin wallpaper, which spoil the effect.
Relief vinyl heavy-type wallpaper is not too critical to the level of quality of surface preparation of the base.
Their plaster should also not be superimposed, but also to grind the spacion layer is not so carefully as under light wallpaper. The appearance when pasting the walls, heavy wallpaper from the vinyl of small grooves or scratches is not as scary as the presence of any convex parts or sand.
What glue will need
You can apply not only embossing on the vinyl wallpaper, but also different decorative elements.
If the roller is completely new, then the fur lumps can be left. It is better to use a roller, used. To apply glue on the canvas, prepare a polyethylene film having a suitable length and width. The glue with a thin layer is applied, and then the wallpaper strips are folded in half, so that the glue layer is inside and can impregnate 2 or 3 canvas at once.
Article on the topic: How to make Ventkanals in brick walls do it yourself
The glue is applied as evenly possible, otherwise the vinyl canvas will be separated from the walls. When applying glue, it should be borne in mind that for vinyl wallpaper, it will take some time specified directly on the package from under the glue so that they are warmly soaked with glue. After a laid time for impregnation, it is necessary to immediately begin glue the wall on the wall. Usually, for this purpose, the stepladder is used. Remove excess glue from wallpaper clean material.
Glue starts with an angle of a wall of a room, which is located perpendicular to the window. Heavy vinyl wallpapers, in contrast to the lungs, can be glued in the corners of whole stripes, and not cut them, as required for light wallpaper. Light vinyl wallpaper can be torn when heating is turned on, which can be the result of temperature difference.
It is necessary to apply the stripes to the upper part of the wall, then they gently spread the book, smoothing the roller. You can use a spatula or brush, which will allow you to squeeze the excess air from under the canvases. Vinyl wallpaper is practically not stretched, in contrast to ordinary canvases. Therefore, even if you skip the smallest air bubble, then it will not be so easy to remove it.
Sticking heavy vinyl wallpapers, high attention is paid to each compound, then they are rolled with a clean roller. It should be chosen depending on what kind of texture have wallpaper. For smooth heavy vinyl wallpapers, a rubber roller is used more often. After sticking each band, it should be immediately cut smoothly or bottom of wallpaper around the ceiling or a plinth.
With what problems can be encountered when weeping wallpaper connections
Vinyl wallpaper is better not to glue in the bedrooms, because they do not let the air.
For a high-quality connection of vinyl wallpapers on the wall surface, it is necessary that the edges of the bands are thoroughly missed by glue. All connections after dusting in drawing or without it required to get into the dry sponge to remove glue. It is impossible to rub joints, otherwise they will be glossy and shiny in the light. Virtually connections do not require a maximum of attention, the whole surface will look more natural from this.
Article on the topic: How to build a house from a bar: technology + photo report + video
For manufacturers of certain types of vinyl wallpapers, it is very important that special glue for sizing compounds. This type of glue is sold separately in Tubes from PVC, having long narrow nozzles. The mechanism of working with such a type of glue is as follows.
After the stickers of two adjacent cloths take glue for connections to enter it in the seam, and then rolled the roller for connections. The main thing is not to pass air bubbles when the wallpaper is glued to the surface of the wall, which sometimes appear on another day. To eliminate the uplings, you should purchase a pharmaceutical syringe for 5 cc., Where the glue is added to injected it into the punctures with swollen places. The remnants of the adhesive must be sold, wiped him dry.
Recommendations for pasting walls with vinyl indoors
It is not so difficult to produce the walls of the walls, as it may seem at first glance, the main thing is to comply with a number of rules so that all work is crowned with success. Here are some rules:
- With a sticker of vinyl cloths in the corners of the room, experts do not recommend bending the strip for dusting with the angle of the room, since the joke will be very noticeable. It is best to stick a one-piece bracket for 3-5 cm.
- It is possible to glue the vinyl wallpaper correctly near the doors, if you do not make a sticker of vinyl cloths into two openings at the same time. Implement stagnation is necessary, observing one-way order.
- It will help to make a plumb that align the cloth will help properly carry out the walls of the walls near the windows. This is required in order to properly cut his protrusions and turn them inside the windows niches. Then the wallpaper is glued under the windowsill.
- Behind the radiators it is necessary to stick the wallpaper correctly, as experts recommend, 20 cm inside, it is not necessary to glue the cloth. If you really need to go over the entire wall behind the radiator, then the canvas are cut into strips of 10 cm and glue them, pressing the roller with a long handle. It is best to paint the wall behind the radiator.
- Plinth wallpaper canvas and ceiling should be glued using a ruler required for cutting from the edge. The ruler is a conventional profile having a triangular shape. This tool is not stupid in the process of circumcision of vinyl canvases.
- To carry out pasting ceiling, vinyl wallpaper should be marked. Put the cloth, ranging from the window and continuing to the center of the ceiling. All work should be done together. At the same time, one should glue the web with a stepladder, and the other is to support his mop, standing on the floor.
- To properly get the ceiling with vinyl walls, it is necessary to make a preliminary markup, and the back side of the curb should be moistened with water and left for 5 minutes wet. Then you need to apply the composition of the adhesive to the prepared border, which should be fixed in the required place. In the embossed surface of the wallpaper, the border is installed before the sticker of vinyl wallpaper. Next, fitting the wallpaper bands are produced in accordance with the borders. Crop the edges of the bands of the line for the wallpaper sticker. For gluing, use special curb glue.
- When the walls are covered with wallpaper next to electrical sockets or switches, they must be de-energized. In places where there is a socket or switch, the glued canvas are cut crosswise. The resulting corners should be taken inside the socket, and then install the switch and socket on the previous locations.
Article on the topic: How to transfer a heated towel rail
Heavy vinyl wallpapers should not be considered an absolutely successful way out, allowing to avoid various errors associated with the preparation and pasting of the surface of the walls. The process of sticking light and heavy embossed vinyl wallpaper is not different, the main thing is to attach the maximum effort.