In order to save onInstallation of the shower cabin can be made with their own hands.
To install a shower cabin, you need to know the assembly sequence, learn to reliably perform all connections, make sealing of joints.
In order to independently mount the shower cabin, it is necessary to know its device.
A shower cabin made of top cover (if there is a closed shower), shower walls, a shower pallet, a mixer and a shower panel (shower with additional nozzles).
Shower cabins are closed and open. Open consists of doors, shower watering can, mixer and pallet. Side walls can serve as laid out a tiled wall of the bathroom. Such a shower cabin can be equipped in the corner of the bathroom, so such cabins are called shower corners.
Installing a shower corner
Shower Cabin Scheme.
To install the shower corner, the following is necessary:
- Select a place in the bathroom, which is most suitable for arranging a corner. The angle must be littered with floor tiles to the ceiling.
- The pallet should be installed on the floor.
- Adjust the horizon with a level.
- If the pallet does not have legs, you can make a pedestal from a cement screed or bricks.
- Then you need to connect the pallet to the sewer drain.
- Then connect the shower panel or shower. The shower panel is the panel on which there is a shower. The panel is usually made from acrylic or steel.
- Next you need to install doors. They can open or be sliding. Shower doors are made from polystyrene or tempered glass.
The closed cabin is a more complex design, which consists of a roof, a shower pallet, doors, a shower panel, a mixer and side walls. Closed shower cabins are a more common option.
The basis of the shower cabin is a frame . It is made of aluminum, having strength and ease. To the frame it is necessary to mount the doors, roof and side walls. In the assembled state, all parts should hard attach to the frame and then install the entire design on the pallet.
Doors and side walls are made of polystyrene or glass.
Pallets are made from different materials, they are as follows:
- acrylic;
- kvarilov;
- Metal steel enameled;
- cast iron enameled;
- faiences;
- From marble crumb.
How to assemble your hands a shower cabin
The shower kit usually includes instructions for its assembly.It describes everything in detail. However, some manufacturers give very little information.
Therefore, you can take advantage of the following tips on its installation:
Mounting circuit shower.
- It is necessary to find a spacious place where it can be collected.
- First you need to install a shower tray.
- Then adjust it horizontally using a level, screwing legs.
- When installing, use the sealant.
- Upon completion of the installation of the shower pallet, the side walls should be installed.
- They need to be attached from behind with bolts.
- After setting the side walls is complete, you should install a shower panel.
- It must be attached to the side walls with the help of self-tapping screws.
- Then install the frame on the pallet.
- Next, with the help of sealant, you need to attach the rear walls to the walls of the bathroom.
- After all this it is necessary to install the roof.
- It must be fixed using self-samples or bolts.
- After that, install doors.
Article on the topic: Screed on the wooden floor under the tile: how to pour
There are showers, which provide for the functions of the Finnish, Turkish bath, as well as the tropical soul. Such shower cabins have a steam generator and a fan.
The fan is designed in order for steam in the shower cabin evenly. The fan also serves to delete this pair from the cab.
The steam generator not only provides a sauna with the necessary temperature, but also cleans water from lime deposits.
The steam generator is designed to provide a sauna with the necessary temperature. When the temperature rises above the desired, the steam generator is turned off. The function of the shower protection function from overheating occurs. There are steam generators with a function of water purification from lime deposits.
Some cabins are capable of insufficient water to turn off the steam generator. The electrical part of the installation is recommended to trust a qualified electrician.
It should be remembered that a separate electrical layout is necessary for the shower cabin - both for the water heater and for the air conditioner. This should be entrusted only by a professional specialist. This is where electricians are connected in the shower.
How do shower cabins function?
Cold and hot water and sewage drain should be summed up for each plumbing equipment. Before installing a shower cabin, you need to prepare all the necessary communications. Cold and hot water should be connected to the mixer. Water connection is recommended to trust the qualified plumbing.
In the shower cabins 2 types of mixers are provided:
- simply or one-dimensional;
- Twin or thermostatic.
The single-dimensional mixer is equipped with a aerator that allows you to easily adjust the temperature and water pressure.
The single-dimensional mixer is the most practical and convenient. Since this type of mixer is equipped with a aerator, it allows you to save water. You can easily adjust the temperature and pressure. Such adjustment during the adoption of the soul provides a constant water temperature.
The thermostatic mixer is a familiar classic type of mixer.
As for removing the water in the sewer, under the shower cabin is a pipe connecting with the drain of the shower cabin. This pipe goes into a sump, and it is already connected to the sewer. This is a kind of siphon of a tough design, and it is most practical than flexible.
After the shower cabin is connected to sewage, it is necessary to check its reliability as follows: Put the sheet of paper under the booth, fill it with water and then drain. If the paper sheet is dry, then the installation is made correctly.
Article on the topic: What are the castles on plastic windows and installation methods
It is worth considering the principle of operation and the device of the shower watering can. It has many holes of various sizes, multifunctional, as it has several modes. Rotate the lever located on the watering can, you can switch modes. For massage there is a rigid flow of water, and for washing the head - gentle flow of water. There can be about 20 holes for various modes on modern cannel. Thanks to the technologies of watering, water can filter water and self-cleaning.
The shower can be mounted on the hose. The hose may have a different length.
Hose sizes are usually:
- 1.25 m;
- 1.5 m;
- 1.6 m;
- 1.75 m;
- 2.0 m.
Basically, the most popular sizes are 1.5 and 1.6 m. Hoses are made of silicone or ordinary rubber.
Rubber is strengthened with a metal foil or piping threads. There are non-metallized and metallized hoses.
Device of shower cabins with hydromassage
Scheme of shower with hydromassage.
In addition, there are shower cabins with hydromassage. The hydromassage function produces nozzles, which can be from 1 to 20. The more they are, the better. The hydromassage is made due to the flow of water under pressure of the water supply system.
You need to find out before buying a booth, what pressure do you have in the plumbing and what is necessary for the work of the booth.
If in your water supply is the required pressure of 1.5-3 atmosphere or 1.5-3 bar, you can install a hydromassage device.
The nozzles providing hydromassage are the following types:
- hydromassage;
- aeromassage;
- Combined.
Hydromassage nozzles are supplied under pressure water.
Aermaceutage serves air, which when hitting water creates bubbles. Combined combine at the same time the first and second. In the shower cabin nozzles are located at different levels, which contributes to massage of certain parts of the body.
The intensity of the jet is different at different levels. For example, at the level of the leg and neck, the intensity of the jet is soft, and at the level of the vertebral zone (spin, loin, hips) - the jet is tougher. Nozzle nozzles move and produce water and pressure air, which contributes to hydromassage of certain parts of the body.
A shower cabin with hydromassage made of modern materials, compact and light, is an embodiment of cheerfulness and health. This small separate world, sparkling magnificence, will deliver true pleasure to its owner and decorate the bathroom. The hydromassage cabins combined all the main advantages of shower cabins and hydromassage baths. Usually they have impressive sizes, but it is capable of saving a lot of space. Distinguish 2 types of combined shower cabins:
- bath with a shower, which divides the bath in half, with the ability to install hydromassage;
- Bath with a hermetic shower, which allows the installation of corner hydromassage and saunas.
How does the bath functions?
Nozzles located at different levels in the shower helps to establish various stream intensity for certain parts of the body.
Article on the topic: Instruction How to translate the door of the Refrigerator Atlant
The steam generator that is behind the pillar of the soul heats and boils water, and then throws up the pair of 60 ° C through the pair nozzle. If the humidity is 100%, the pair volume in the booth is able to warm up to 50 ° C. At first it may seem that this temperature will not quite enough in order to get along. But in fact, just such a temperature is the threshold of pain sensitivity, not everyone can withstand the temperature above 45 ° C. Modern hydromassage cabins have proven their effectiveness and reliability over long years.
The healing force of water is known for a long time. Back in the writings of the hypocratic, the descriptions of the healing procedures are given, which are the prototype of modern hydromassage. Of course, in those days to modern shower boots were still far away. The hydromassage helps to improve blood circulation in surface layers of the skin and tissues, stimulates the circulation of lymphs and delivers many pleasant sensations, carries a large charge of energy and removes stressful loads.
Dismantling shower
Sometimes it happens that the dismantling of the shower cabin is required, for example, when moving or changing the old cabin to a new one. In order to correctly disassemble the shower cabin, you must follow the instructions below:
- First you need to turn it off from electricity.
- Then overlap the cranes with hot and cold water.
- Disconnect flexible water hoses.
- Disconnect the siphon from the sewer pipe.
- Disassemble all that is inside the cab: Dispensers, shower, towel holder, shelves, etc.
Before you start dismantling the shower cabin, all the seams lubricate the sealant to remove the sealant.
Next, begin to disassemble the cabin itself. Previously, it is necessary to lubricate all seams to remove the sealant.
Wait when a chemical reaction begins, and then quickly until the sealant froze again, disassemble all components (top cover, roller mechanism, side walls, doors).
It is worth noting that the sealant can be removed and mechanically cut with a knife. However, after that, slices of silicone may remain, which can be softened with solvent or gasoline, and when it softens, it can be easily removed.
When dismantling the shower cabin, it is recommended to use a screwdriver or a screwdriver.
After the side walls were removed from the pallet, you should move to the pallet. It is dismantled easier if stood on the legs. If the pallet was attached to the screed, then you have to work hard and break the screed. It is not a fact that after that the pallet will remain as much. Therefore, all pallets are mostly attached on the legs.
Guided by the instructions described above, you can independently install a shower cabin, using a silicone sealant, a screwdriver or a screwdriver, drill and level. Also, if necessary, you can make a disassembly of the shower cabin. You just need to do on the contrary, all installation actions.