Good fabulous bear - a frequent guest in children's matinees. Therefore, many kids gladly try on the role of brown giant. In stores it is hard to find the original bear mask. The successful option will be its own manufacturer. As a bear mask is performed with your own hands, you can find out in the proposed master class.
Depending on the availability of free time, a way to create a mask for a child is selected. The bright and presentable is the foam bearish head.
Cheerful Mishka
Mask reminds Good Bear from the cartoon loved children. Bear head is suitable not only for children, but it may well be the props of children's animators.
The size of the cap masks is designed for a five-year age. If necessary, you can calculate your own size.
To work on the product will need:
- foam;
- glue moment (yellow);
- scissors;
- pen or pencil;
- Gouache, brushes.
First, a rectangle is cut from the foam rubber size of 20 × 56 cm. The first measurement here indicates the height of the header, the second - the scum of the child's head.
Along the upper part of the foam leaf, the same triangles are drawn, the height of which is 9 cm, and the width of the base is 6 cm.
Triangles are cut on two sides. Their bases remain intact.
For short sides of the rectangle, glue is applied, and the edges are connected.
The next step is the combination of triangular teeth. For this, the triangular sections are laid with glue and docile together, forming a hat.
The resulting workpiece can be the basis for any masks of this type.
A rectangle with sides of 30 and 22 cm is cut out of a separate foam cloth. The rectangle shares the pencil into two equal parts, after which the part is drawn at the top of the dome.
On the places marked in the photo with crosses, glue is applied. Later it will be needed for the internal connection.
The detail in the form of the dome is cut, and its side sides stick together.
Article on the topic: Baskets Crochet. Knitting schemes
The protruding part of the workpiece is treated with a glue on the seam to a height of 5 cm, and then begins the inside of the cylinder and is pulled out there finally.
The places that the glue was previously applied (labels with a cross) are glued together by forming a bulk figure. It will be a bear nose.
For the bottom of the mask in the shape of the lip, a rectangle is cut 13 × 12 cm.
He is divided in two, after which two smooth arcs in the form of a check mark are drawn with a pencil, connecting in the center.
The part is cut and the "checkboxes" sections are fixed with glue. Must happen "Boat". Billets for the nose and lower lips are bonding.
The resulting figure is attached to the cap-based product.
Separately form foam ears in the form of semicircles. The height of the ears is 7 cm, the length is 10 cm.
Abrasion is cut: two short semicircles equal to the length of the base is 10 cm.
Small elements are fixed on the basis of a mask. Misk cheeks are manufactured. For this, two foam circles are taken with a diameter of 12 cm.
A quarter of a circle bends inside. The resulting end parts are neatly glued on both sides of the bear's nose.
The mask remains to be punished with a gouache in accordance with the usual color gamut of the forest beast. Tassel drawn eyes.
Such a bear mask is put on a child's head in the form of a hat. Quickly and just the product can be created using colored paper.
On a brown paper sheet draws a form of a future mask in the form of a bear face with eye slits. Detail is cut.
Two yellow circles decorate the ears of the bears. They are glued using PVA glue.
Bear's cheeks are cut into the yellow color, after which they are attached to the main part.
A triangular nose is glued here, cut out of black paper in advance.
On the reverse side of the mask are fixed with ties or a thin elastic band.
To get a completely flat product, you can use the corrugated cardboard in the work, and the bear's nose is made convex.
To create such a nose you need to take a rectangle, folded along the long side into three equal parts, and then combine half the width. Detail break. On the extreme parts of the center to make perpendicular cuts. The workpiece is folded at a small angle so that the cut parts come to each other.
Article on the topic: Pepple Crochet Pig: Master Class for Knitting Little Hat
In this form, the part is to glue the product. The outer part of the nasal element is fixed with a black circle. The product will look attractive if it does not use paper in work, but felt.
The fabric has saturated colors, and the light volume that dodge the tumble in the top of the mask will make it more interesting. At the same time, due to the stitched tissue parts, the mask of felt will serve not once, and supplement the image of the bear can be felt overlays into the hands of the child.