Track lamps: what is it? [interiors with photo]

Lighting systems are actively developing and not only by varieties of sources, but also by constructive devices.

About the nuances of the system

Only if you understand the design of the lamp, it is easy to understand what a track is. Translation of this word means the track or path.

The lighting system includes:

1. The lamp equipped with non-slip contacts (current collectors). Wired tires.
2. Food. The role of the source performs low voltage lamps.
3. Fastening. These are containers, rods, tubes or cables.

The number of phases or the group established independently on the lamps installed independently on the lamps is dependent on the design features. It is possible to organize the inclusion of electricity, depending on their total.

Luminaires produce different types and structures, for example:

1. From the reflector and configuration of the ceiling, the direct dependence has a flow of light: directional or scattered.
2. Models with a directional light stream are equipped with hinges, the rotation of which is carried out in different planes.

The second of the list is assumed to be sent to a specific illumination zone.

About the light source and power connections

Lamps are installed in track lighting devices:

1. Halogen.
2. Incandescent.
3. With LEDs.
4. With luminescent illumination.

Pick up the power supply correctly depending on the type of lamps. For LEDs, constant diet blocks are used for 12V, and for halogen - electronic transformers. The manufacturer developed models operating from 220 V.

Note. When comparing the number of connected network (220 V) and low-voltage luminaires, if the cross-section of the busbar is the same, then it is possible to install a larger number of high-voltage sources. It means that when the power consumed is one indicator, the current flow will be 20 times less.

About installing and connecting

By the method of installation of the lighting system distinguish:

1. Wall mount.
2. Ceiling mounting.

Article on the topic: Houses like Arshavin: Copy the interior of the famous football player

Luminaires can easily be fixed on any designs that are at some distance from the ceiling.

Some features of installation:

1. To calculate how many lamps need to be set as much as possible, it is enough to know the indicator of the cross-sectional area of ​​the tire.
2. You can install the lighting system to ensure the backlight of a certain zone..
3. The desired number of lamps is started on the busbar from the end, then you need to wear a plug on the first. The last element is performed in a decorative design, causes tire protection and removes the luminaire.
4. To increase the length of the track, connectors with latches, made like the couplings for pipelines, are applied. The installation of the track is possible with branches and turns to perform this operation, the installation of curved and rotary parts of the busbar.
5. A power cable and source comes from where electricity comes from.

It is worth noting. Despite the fact that the housing of the lighting devices are performed from dielectric materials, the current parts must be grounded. It is possible that during operation it will be started to touch them to move or configure them.

The track lighting device has indisputable dignity - an increase or addition of lighting points, as well as the ability to lay and move the mechanisms of rotation.

Track lamps. All details about Fashion Trend (1 video)

Track lamps in the interior (7 photos)