The glass door between the rooms looks very profitable in any interior. But, in addition to beauty, it performs both practical functions. At the expense of the glass, the size of the room is visually expanding, and an additional light passes into the room. It often happens so that the glass replacement is needed in the interior door. The reasons for this may be different. The most common is his damage, the need to reversal or the desire of the hosts to replace the glass on the new interior design.
Interior door design with glass.
How to replace the glass in the interior door?
If there are no mirrors in the interior door, color stained glass windows, glass baguettes and other decorations, then you can, observing a thorough accuracy and a simple action plan, replace the glass yourself.
To determine the procedure for action, first need to find out what your interroom door is. That is, you need to understand how glass is attached to it. Almost all the old and many modern models of the doors, the glass can be inserted into the opening and fix with conventional or curly staps. But there is another type of fastening (with hidden fixation), when the glass will be needed to start the door through the door.
When replacing broken glass in the interior door, it is necessary to act extremely carefully so that when working tools do not damage the door, as well as a new glass.
Before the start of work, you will need to get rid of the old glass, often broken or cracked. It is better to prepare for this, providing ourselves with the necessary tools and appliances:
- gloves (better to take dense, but not very thick);
- Middle Size Hammer;
- Scoop, broom;
- high density paper;
- Wide slotted screwdriver or chisel.
The fasteners in the form of a stroke are relaxed with a screwdriver (you can also take a chisel), hammer. The main thing is put on gloves. No need to remove fastening completely. For security purposes, it is better to start on top. Let's gradually remove fragments or glass, start with large. Put them in tight paper and finally wrap. After that, fastening staps are removed. If the rubberized gasket suddenly occurred, it is better to purchase a new ribbon. Make sure that nothing fell and did not break, and if it happened, then immediately remove the fragments using a broom and a scoop. Work better in shoes.
Article on the topic: List of toilet rules
How to replace the glass: Stages of work
To change the glass in the interior door, you will need to determine its opening. With a complex form, it is better to turn to the glazier. Although at home you can make a special cardboard pattern. Apply the resulting dimensions. Now you can cut a new glass on it. With accurate forms you can handle without assistance. The main thing, remember that the glass cannot enter close to her bed. This means that you need to record dimensions that will be less than 1,5-2 mm for each side.
Sharks of the glasses must be removed in thick gloves, first large, then small.
Glasses can be bought either in stores for construction, or order in a workshop that specializes in cutting glass and mirrors.
Interroom door must be prepared for insertion. From the entire surface of the bed, remove the old gasket, remove the magazine overlooking your time together with the sealant. Pre-acquire a new sealant (special for glasses and windows). You may also need fasteners for glass that depend on the door model. It can also happen so that when dismantling a patch will break. There is a large selection of flexible analogues of such fasteners made in different colors.
Glass also needs to be prepared. Let it be warm to room temperature. Then rinse it using water with soap. Wipe it better pure cotton flap. So cutting will go easier, and you protect the glass from breaking and crumbs. Where the place of consolidation, remove the residues of paint and putty.
Remove your door from the loops and laid it on some horizontal. Coming for this and table. The main thing is that it is long and wide. So the interroom door will be able to lie completely, because the inserting glass is in suspended state - the case is risky.
Article on the topic: Learn how I sewed the scope on the oblique window in two accounts
Apply silicone throughout the perimeter of the bed where the glass will go. Use for this gun for sealant. Put the glass into the gasket tape. After that, start it gently put on the door. Exclude the pressure on its surface. If the insert is tight, try to trim the gasket. Treat with silicone sealant and second piece of glass.
Fastening headquarters are also sitting on the sealant, after which they need to be tightly adjusted to each other.
And then it is better to fasten them to the door canvase. For this purpose, take decorative finish carnations. The sealant grabs approximately an hour, no less. After that, you can hang the door back.
Each door will have their own nuances. But if desired and the right approach, the replacement of glass will not be a difficult thing for you. The main thing is to work carefully, and everything will turn out!