Laying the parquet board with your own hands today is one of the most environmentally friendly methods. Naturally, the quality of the material plays an important meaning. But by choosing a fairly high-quality parquet board, you can be completely confident that your coating will last long and will not be distinguished any harmful toxins.
A parquet board can be laid in rooms where the level of humidity is ranging from 35% to 60%.
Now designed by specialists a lot of options for laying a parquet board. Everyone has both shortcomings and dignity. But it is considered that one of the best ways is the laying of a parquet board on Faneru. As a rule, while the coating acquires greater strength, and the degree of deformation of the boards is significantly reduced.
Preparation for work
The duration of the parquet service largely depends on the technology and the correctness of its laying on the floor. Of great importance it is necessary to devote the parameters of the microclimate in the room, because It is they who determine the minimum degree of deformation of the boards. So, the main parameters include:- air humidity in the level of approximately 35-60%;
- The moisture content of walls and floor is about 5-6%;
- room temperature at home from 19 to 23 ° C.
But even the method of laying a parquet board on Phaneur has three more methods, with which you can work with parquet.
These include laying on adjustable special lags, on the draft floor or on the usual concrete tie. All of them are good, therefore, to determine exactly what method to choose, consider the subtleties of laying on each method.
Laying parquet on lags and fan
So, the first method is laying on lags. To begin with, if necessary, warm the floor and spend all the necessary communications, then take on the lags. Before work, do not forget to carefully treat the boards for the lag with an antiseptic composition and dry them. Immediately prepare such tools and materials:
- self-tapping screw;
- dowels;
- screws;
- Special glue;
- plywood sheets;
- building level;
- a hammer;
- Wedges and plans.
Article on the topic: Methodology and means than washing Wallpaper
Now, ranging from the edge of the wall, sit on the screws of the lag. Do not forget to periodically check evenly with the help of a level, and every half meter additionally fix the coating with screws with dowels. If irregularities are detected, it is recommended to align them with the application of the plane and blades.
Parquet board structure.
When the floor is decorated with wooden lags, you can start fastening plywood. It will be laid in two layers. The first layer is attached using screws to lags, and the second is located on top of the first with glue. Such a two-layer option will ensure the durability of the floor.
About two days later, when the glue grabs well, it will be possible to put the parquet board on the usual way - first on glue, and then on the screw. After that, grinding the blackboard, then remove the garbage and dust with a cloth.
The final moment of the flooring floorboard on Paneur is its lacquering. You can apply both one and several layers of varnish for wood - depending on the quality of the surface.
Laying parquet boards using screed and plywood
The next way to lay the parquet on the Faneru - using the simplest screed from concrete. It is also a fairly reliable method that allows you to avoid large coating deformations. To work as this method you will need:
Parquet board layout scheme on Faneru.
- concrete solution for screed;
- primer;
- plywood sheets;
- glue special;
- building level;
- a set of screws;
- a hammer.
First you need to pour the floor with a cement screed. So that everything happens exactly, the screed at the end is distributed using a smooth long metal strip. After the end of the fill, wait about a week, while everything grabs and dry.
The next stage is the fastening of plywood sheets. Taketing for fastening sheets on the screed, keep in mind that the thickness of plywood should be equal to the thickness of the parquet. On the floor you need to apply glue with a thick layer and lay sheets. Carefully rectify to gaps: they should be 10 mm about the walls, and between sheets - 5 mm. They will contribute to the fact that Plywood is not raised.
Article on the topic: Bearless toilet - from choice to installation
About 3 days later, when the glue finally dries, the plywood is additionally fixed with the help of self-samples, which also need to slightly sweep the hammer. When this is done, after another three days, a parquet board can be put on the phanee described above.
Fastening on the draft floor and Fana
The third method of laying parquet on Faneru - on the draft floor. The method is not bad, but not the highest quality. Its use is advisable in the conditions of limited time and materials. Its essence is that the floor is not prepared under the Faneru. To work, you need to purchase only glue and self-tapping screws.
First, the glue on the floor is applied with a thick layer, where plywood sheets are laid. Every 50 cm they are fixed with self-drawing, and their caps are drilled with a non-heavenly hammer. Upon completion of the method described above, a parquet board is stacked.
So, the main methods of laying parquet on Phaneur are considered as detailed as possible. Now it's much easier to figure out which method to choose. Do not forget to calculate the materials to avoid surprises.