To date, modern electrical installation does not work out without a variety of fittings and devices. Most modern devices have power contacts equipped with special screw terminals for connecting feed wires. If you connected a power outlet then probably noticed that with excessive tightening of the screws, damage to the conductors may occur. This is due to the fact that the screw is crashed into the wires and presses them. So that in the stranded wire, the cross section of the core should be protected. This is done with the help of tips, and for their high-quality installation you need a crimp.
HSC8 6-4 Mini-Type Self-Adjustable
In this article, our site "All electricity" will share information about the tool, which is intended for crimping tips of the type of NSHA and NSW. This tool is called the crimper for crimping tips. Now it's time to get acquainted with this tool in more detail and understand how it works.
Crimper for crimping insulated tips
Without a good tool, it is impossible to perform high-quality electrical installation. Of course, in some cases you can do without using a crimper for crimping tips, but it is really difficult.
Tubular insulated sleeve
In specialized stores you will find a wide range of tools. It does not matter to buy an expensive tool. In the market you can meet cheap models. You can also find tools that simultaneously combine several functions.
Overview of the Crimper for NSHA TIPS
The most common and popular today is considered the HSC8 6-4 Mini-Type Self-Adjustable crimp. This tool is intended for crimping tips with a cross section from 0.25 to 6 mm. Self-adjustable in the title denotes that this crimper is considered self-regulating. You can familiarize yourself with it in more detail in the photo below.
Article on the topic: Duplex floor do it yourself: Preparation, installation
Sizes of Crimper HSC8 6-4 Mini-Type Self-Adjustable
To purchase this tool at a fairly low price, you can go to the Aliexpress site. Using the HSC8 Code 6 can only be used for NSHVA or NSHB tips. Other types of tips With this tool, you will not be able to enable. This "crimp" is considered a really good assistant in the process of conducting various electrical work. With it, without much difficulty, you can perform the crimping of flexible multi-breeding wires of wires and cables when connected:
- sockets;
- switches;
- lamps;
- Terminal workers;
- circuit breakers.
The crimper for the crimping of HSC8 6 tips is capable of crimping not only single, but also double tips. The size of the sponges in this tool is configured automatically and change the matrices during the operation you no longer have.
The crimper itself is quite convenient and the manufacturer took care that the tool lay well in his hand. The handles are made of thick plastic, so they do not express out of the hand in the process of work. The length of the handle is 11 cm, which allows you to cope with the tool, even one hand. The total length of this device is 18 cm. In the manufacture of the working part of the tool, the manufacturer used high-quality steel, with a thickness of 2 mm.
The tool is perfectly held in hand
The HSC8 6 crimper contains a unique snoring mechanism. This mechanism allows you to provide a full crying cycle and blocks the handle during the inverse course. This gives additional convenience in the exercise of crimping. With the help of the blocking function, you will no longer come across the problem of the "adaptation" of the tip due to the human guilt. Returning the handles to its original position is provided by the spring, which is installed inside.
The process of crimping the tip using the Crimper
In the matrix there are 4 working segments, so the crimping is carried out by a square. All work details of the handle, snoring mechanism and the matrix have a hinge compound. If in the process of work you wish to stop the crimping then to do it can be using a special lever. This model also has a special function of adjusting the clamping effort of sponges. The weight of the tool is about 550 grams.
Article on the topic: Cock stitch cross scheme: free download, sets of vintage, gold chicken, articles and mini charts with moon
How to use a printer for the NSHVI
In the process of electromotion, many people use stranded wires that need to be connected to electrical appliances with screw terminals. If in such a terminal to fix the stranded wire then part of the lived is necessarily damaged. Therefore, many use NSHVI tips.
NSHVI TIP
Now it's time to figure out in more detail how to use the HSC8 6-4 mini-type crimper when burning tips. For crimping, you first need to take the required wire and remove the isolation from it. Some newbies often make a mistake and twist the wires, but it is not recommended to do it. The tip skirt is made in the form of a cone, so the wire will easily enter it. After that, insert the tip into the crimp and execute the crimping. It will be performed in the form of a square and the connection will be quite strong.
Many also incorrectly choose a cross-section of the tip. If it is greater than the wire then the connection will be poor quality. Double tip can be compressed in the same way. The square will also be smooth.
Now you know how to use the HSC8 6-4 mini-type crimper. As you can see, the tool is really high quality and there is nothing complicated in its use. The only drawback is too small upper section. For example, dual tips 6 mm2 with this tool will no longer contribute. If you use this Crim model then shade your opinion in the comments. We hope that this information was useful and interesting.
We recommend to explore: vse-elektrichestvo.ru/elektromontazh/instrumenty-elektrika/dielektricheskie-boty-i-galoshi.html.