In the hallway you need a wardrobe or clothes hanger. An ordinary wardrobe is inconvenient due to hinting doors that block the passage, and the hanger with a bunch of clothes looks far from as aesthetically as I would like. Therefore, in recent times, they are increasingly put a wardrobe in the hallway. This type of furniture allows you to rationally use the entire useful volume - at the expense of the shelves, baskets, hangers, etc.
Types of structures
Cabinets coupe are three species. Built-in differed in that they occupy some niche and have no own walls, gender and ceiling. A similar design is made and then when you can burn part of the room from the wall to the wall. In this case, they simply order the facade (doors) for a wardrobe with a roller system and guides. Inside the partitions and are fixed / installed filling. In some parishings, the built-in wardrobe is made on the site of the former storage room, with another planning it is possible to burn part in the end.
The built-in wardrobe occupies a niche or part of the room from the wall to the wall
If there is no such possibility, they put the cabinet compartment. This is a full-fledged large wardrobe with the rear wall. sidewalls, floors and ceiling. It is characterized by the design of doors and filling. Another difference is that this kind of storage systems are trying to do under the ceiling to maximize the use of all space. Yes, and it looks more organically.
Cabinet coupe. Materials are larger, but the functionality is the same
The following type is the corner cabinet of the coupe into the hallway. They are usually small, are convenient to use space in the corner, which is different in a different way. In large corner structures, it is difficult to choose the filling in the corner - so that it is convenient to use it is necessary to try well.
One of the options for the corner cabinet compartment in the hallway - between two doors
Radial cabinets coupe. They differ in the fact that they have a non-smooth and curved facial part. Side walls can be rounded. Such furniture is purely individual and looks very nice, but it is more expensive.
Radial cabinets look interesting
It is briefly about what the wardrobes of the coupe and how they fit into the hallway and corridors. Pick up the best type is simple - you need to look at the plan, see where theoretical you can enter such furniture. Then to estimate how convenient it is exactly the location and not to forget to take into account the direction in which the door located nearby. If necessary, they can be replaced by replacing the loops.
Article on the topic: Original composition of 3-samp in the form of cats or lamps do it yourself
Dimensions
The smallest cabinets of the coupe make two doors and have a width of 1-1.5 m. The maximum length of the cabinet is limited by the number of doors. Maximum put them 5. At the same time, it is necessary to take into account that a fairly wide profile with five "rails" is attached on the floor, which rollers fixed on the doors ride. A similar profile is attached to the ceiling.
This is an option for 4 doors.
If the clothes on the shoulders are many
Small corner wardrobes of the coupe will be suitable even for small-sized apartments
This is one of the examples of the wardrobe in the hallway at 3 doors.
The depth of the cabinet coupe can be any, but the standard is considered 45 cm and 60 cm. To order makes from 400 mm to 700 mm. In the height, the wardrobe can be under the ceiling. Usually they are made in the range from 2000 mm to 2700 mm.
Filling
Deciding with the type and size of the cabinet coupe, proceed to the development of filling. This is a filling that is behind the doors. Since in the hallway, they usually leave upper clothes and shoes, first of all weigh the place under them.
Planning cabinet coupe inside: for two and three doors
Outerwear
For a coat and other clothing long, a compartment will be required, where you can hang hangers. If the width of the cabinet is 60 cm and more, put an ordinary crossbar to which the shoulders cling (hangers). It can be placed at the shoulder level or slightly higher.
At sufficient depth, the crossbars are installed
With a width of the cabinet with a coupe 45 cm and less, it is necessary to look for a retractable design - transverse (frontal) rods, on which hangers hang parallel to the doors, and not sideways to it. Similar structures are attached slightly above the level of the head - it is also more convenient. You need to raise your hand and hang hanger. Therefore, at about this level the shelf is attached, and there is already a bar.
Rods for front arrangement of hangers
The height of these departments depends on what you plan to store here. Under the raincoat, coat, coats are 130-150 cm depending on the growth of the owners. Under the jackets, jackets and the other. Similar clothes reducing 90-120 cm.
With a cabinet height of a coupe in 220 cm and more in one section, if necessary, you can place two branches for crossbar with hangers. In the top is not installed bar, but pantograph. This is a crossbar with a mechanism that allows it to raise and lower it.
Pantograph allows you to use a place to the top
Article on the topic: How to protect the apartment from the cold
All this allows you to comfortably and compact to the upper clothes.
Storage shoes
Under the shoes are given to the bottom of the cabinet coupe. For storage of shoes, it is more convenient to install the shelves from LDSP, but the mesh. First, such shelves have better "viewing", secondly, dust and dirt do not accumulate on them, it's convenient to install shoes on heels.
Ideas for storing shoes in a closet compartment for a hallway
In the photo you see special retractable systems for shoes. Mesh, those that are fit, you can fix two in one compartment: on the right and left wall. They are not very broad and between them even remains a small distance.
Instead of lattices, you can set several tubes or rods at a short distance from each other. Moreover, the rear tube must be slightly higher.
Another way to store shoes in a closet compartment in the hallway
The height of the joints for shoes is determined on the basis of its quantity. Someone is enough two, and someone and five will be enough. There is also a wardrobe compartment in the hallway that you can develop a filling for your needs.
Shelves-boxes
At the very top of the design - under the ceiling - make an extensive department in which large rarely used things are stored. There you can also send clothes, which is not worn in this season. The height of this shelf is about 60 cm, but look in circumstances.
One of the options for planning a cabinet compartment for a hallway inside
The remaining free space is filled with shelves and drawers or wire baskets. Here you can store hats, bags, mittens, gloves, scarves, etc. It is also convenient to have a compartment for umbrellas. It is especially necessary for long umbrellas of the "cane". The distribution of their arbitrary - as you seem more convenient, and do it. There is only one nuance with drawers. Compartment where they should be already than the width of the door. Only in this case the boxes will be advanced.
Vacuum cleaner and ironing board
The wardrobe and vacuum cleaner can be hidden in the wardhouse for the hallway. These are two devices that are quite difficult to find a storage space.
Sliding wardrobe in the hallway: a plan with sizes
The figure below provides a place for a conventional ironing board. By the way, they are embedded, with the mounting system to the walls. But in this case, you will not be able to transfer them to another room and iron will have to be in the corridor.
Under the vacuum cleaner simply assigned the suitable compartment. It can be specifically planned for an existing unit.
Read more about filling cabinets coupe here.
Article on the topic: Washing machine "Baby"
Design and Design Ideas
First we will talk about what makes cabinets make. The entire design can be divided into housing and facade (doors). The hull makes from laminated chipboard or MDF. An option with chipboard is cheaper, but designs are obtained only straightforward - this material will not bend and the technology of its manufacture does not allow to obtain curvilinear surfaces. MDF - more eco-friendly and expensive material. Here from it you can form rounded faces.
MDF allows you to create rounded furniture forms. Such cabinets are called radial
Facades or doors for cabinets of the coupe make from different materials framed by the profile. Use:
- Laminated chipboard and MDF. The laminating film can repeat the texture of wood, leather, be a monophonic matte or glossy, with a pattern geometric or vegetable.
The texture can be any - right up to the imitation of skin crocodile
- Glass. Transparent glass is almost not used, but color or matte can be found.
Matte unbating glass is also used in the manufacture of facades for cabinets coupe
- Mirror. Very common material. Drawings are applied to the surface on sandblasting technology. They can cover the mirror almost entirely, leaving small fragments of untouched mirrors, and can be applied only by fragments.
Mirror wardrobe
- Separately it is worth mentioning the photo printing. This technology allows you to transfer any image to the film. This film is then glued on the facade.
You can transfer any photo or drawing
But most often you can meet the combined facades. Various combinations of the materials listed above give a simple incredible amount of design options. You can develop a design for any interior and taste. Some examples in the photo below.
How to make the sliding doors yourself for the wardrobe, read here.
Horizontal division - widely used
Immediately three textures - DVP, mirror and sandblast drawing
Such a wardrobe for an entrance hall with a hanger and a table is convenient
Interesting combination
Just a mirror surface makes a small room more spacious
Built-in wardrobe in the hallway with interesting doors
East style drawing
Circuit wardrobe with backlit - convenient
Radial cabinets look interesting
Combination of brown flowers and different textures
Plant ornament is one of the common topics
Imitation of a wooden surface, but an unusual combination with different directions of "fibers"
Drawing on glass in oriental style
Just and tasteful - matte glass with horizontal division
Use even space over the door - a good idea for a small hallway
Corner cabinets for an entrance hall: Use the available area to the maximum