All materials for the construction of walls: brick, concrete, stone in different degrees absorb water. In winter, the formed ice crystallies destroy the material from the inside. The house becomes cold, raw and black spots of mold appear. To preserve the microclimate of housing and the protection of walls from destruction, facing the facade of the house is made. What material is best suited, determined in each case by the owner of the house and its capabilities.
To preserve the housing microclimate and wall protection from destruction, facing the facade of the house
Wood facades are unique and always in brand
Tree is the warmest material with a unique drawing of lines. Each breed has its own special shade, changing under the influence of the sun and rain. Modern designers are used as a facing material artificially aged tree covered with matte varnish. It effectively looks against the background of glossy plastic and metal surfaces, shiny glass.
Facade Finishing Block House
Manufacturers offer several types of facade facade with natural wood:
- Block House - rounded log;
- The panels from the rails - repeat the planed and glued bar;
- lining;
- Shipboard;
- Planken;
- panels from boards and thin wooden plates;
- Massive board.
The tree saves heat and allows the walls to breathe. Due to the high vagina vagina, outlook outdoor. Facing of wood creates a healthy microclimate. The magnificent material turns the standard brick house into a luxurious Terem.
The boards and panels made of natural wood are attached to the profile. Planken and massive board are installed with a gap for expansion and ventilation. Molding and shipboard are mounted on Vangest. The rest are connected with grooves.
Article on the topic: Stucco on the facades of houses, a lightweight version of a heavy decor
Facade trimming trim
Chips and sawdust with a composite worthy replacement of expensive material
Natural wood expensive material requiring regular care. Polymer composite and other finishing materials made of compressed sawdust and synthetic fillers have specifications a little worse. But the price is significantly lower. Facing products for facades are completely repeated form and drawing of natural. The coating reliably protects them from moisture and burnout in the sun. The facade of the house looks natural. Only approaching close to you can see which material is actually used.
The main technical characteristics of facing facade materials made of wood and composite with chips.
| Material | Gigroscopic | Water warping,% | Lifetime without coating, years | Spray |
| wood | absorbs water | 12 | 25. | burning |
| DPK. | Does not absorb water | one | fifty | does not burn |
The thermal conductivity and vapor permeability differ little. Wood requires constant care, coating protective means from insects and moisture. All necessary components are added to the DPK in production.
Facade of DPK.
Natural stone facade - durable luxury
Natural facing stone durable. He gives the building a luxurious look. It is enough to separate the ground with marble, a diorit or rocky rocks of dark tones by choosing a large size material, and the house acquires a massiveness.
The facade looks noble from soft breeds:
- dolomite;
- tuff;
- sandstone;
- limestone;
- Shelter.
They have shades of pastel and warm tones of beige, yellow, brown and cream. Depending on the desire, the usual structure turns into an ancient castle, a fortress or a fabulous house of a good king. The building acquires individuality. Create two identical facades using natural facing stone, it is impossible.
Natural stone facade
Finish requires care. Once at 3-5 years it is desirable to cover the facade of the house with a protective mixture. Stone absorbs water within 3%. However, the solution with which it is connected is hygroscopic and destroys moisture. The work on the finishing of the facade should be carried out by a specialist.
Facing facade with natural stone expensive. She is for people with prosper and ambitions. This material is talking about the good taste of the owner and its uniqueness.
The disadvantages of the walls of the houses at home with natural stone, there is a big weight. If a standard foundation was laid during the construction of the building, it must be strengthened. Glue and finishing materials need to buy special, already ready-made supplements.
Article on the topic: Handrails for disabled in the bathroom and toilet
Artificial stone for finishing the facade - a budget version of the creation of a masterpiece
The most common artificial stone used for construction and finishing is brick.
For cladding, materials made of red clay for different technologies:
- clinker panels with insulation and in the form of plates;
- terracotta plates;
- Facing brick.
Materials are characterized by manufacturing technology. The clinker is pressed and burned at a temperature of more than 1000 degrees. It remains no pores and air bubbles. When sintering, a glossy solid surface is formed. Clinker pushes moisture. Does not respond to most acidic and alkaline chemical reagents. High resistance to erasure makes it an excellent material for the base.
Facade trim clinker tiles
Facing brick and terracotta plates in small quantities absorb moisture. The facade of the house, decorated in such material, is necessary immediately after drying the adhesive and be covered with protective mixtures every 3 years.
Lined with an annealed clay, the facade of the house looks new. A large selection of colors allows you to combine and create unique options.
The polymer and vinyl filler with sand and cement in the facade panels mimic the shape, color and texture of natural stone, brickwork, wood:
- porcelain stoneware;
- Fibrocement;
- glassfibobeton;
- porcelain stoneware;
- Vinyl panels.
They are significantly cheaper than natural materials. Mount them on the wall and the foundation can be done with your own hands. This is a budget option to create a magnificent facade with excellent characteristics. Missed to distinguish, synthetic material from natural, impossible.
Facade of facing brick
Budget plaster and combination options with wood and stone
The classic finish of the facade for many decades is plaster. It is applied to a wet facade in several layers. Modern finishing materials in the form of paints and decorative putty have become a reliable protector of walls from moisture. A large selection of colors and textures allows you to create individual facades for every taste.
The plaster is perfectly combined with various materials. The base of the stone and the trim of the corners give the house. Finishing windows highlights them and makes more. Watching and painted walls emphasize ease. Use and combinations with wooden elements. The number of options is infinite.
Article on the topic: Methods of appliances and hanging rafters
Plastering perfectly combined with various materials
Siding for three days do it yourself
For those who want to protect the facade of the house and do everything with the smallest costs, you can mount siding:
- vinyl;
- acrylic;
- metal.
Mounting on the crate with the help of self-tapping screws and the connection between themselves in the lock allows you to quickly make the facing of the house with your own hands. Siding cost is low. Significantly more expensive enough elements and profile. Therefore, it is necessary to measure everything and calculate the flow to not buy too much.
Facade trim vinyl siding
The panels protect the facade from moisture well. They have laminated or varnishing coating. Repel dirt and easily wash with water. Installed on a ventilated facade. The thin material is well cut by metal scissors. It has weight up to 5 kg. In protective processing does not need. Lifecycle 10 - 25 years.
Facing facing options. Each owner of the house chooses its own.