In recent years, increasingly began to meet at home trimmed by ceramic tiles. As a person is pragmatic and, unfortunately, not like, such a choice of outdoor decoration, to put it mildly, hit. It is known that finishing with tiles, even if Russian pleasure is very expensive, even if you do all the work with your own hands.
Facade clinker tile panels
Began to be interested in this topic in more detail and discovered clinker panels for the facade. It turns out that everything is not as scary, as I imagined, so I want to stay on this material in more detail.
What it is
Horizon and diagonal facade
Clinker tiles are also called the facade thermopanels. In fact, it is a multi-layered finishing material, where the insulation performs polystyrene foam, which is pasted on ceramic tiles.
In the design of the panel there are special grooves and holes for fastening, which makes them even more attractive for the outer decoration by homemade hands.
Interestingly: Russian-made panels, in terms of quality are not inferior to foreign counterparts, and they are much cheaper.
Clinker panels for facade
After a more detailed acquaintance with this material, I could list all its advantages, but to save time, I will dwell only on the main:
- Relatively lightweight, which does not require additional strengthening the foundation of the house.
- Resistance to mechanical stress.
- Thermopanels for the facade do not require an additional layer of insulation, which ultimately affects the total cost of cladding.
- The use of thermopanels, significantly increases the service life of the building.
- Comfortable and easy installation allows you to finish with your own hands.
- The air layer between the panels and the wall prevents the occurrence of fungus and mold.
- Complete lack of temperature deformation, which allows installation at any time of the year.
- The appearance resembles a decoration with ceramic tiles, which makes the facade of the house even more attractive.
- The clinker panels can be mounted directly on the wall of the house, without the manufacture of doom, when installing, do it yourself, it greatly simplifies the process.
Article on the topic: Tulle for the living room - 90 Photo of the options for modern Tuli Design
Panel production
At first glance, all clinker panels are the same, in fact there are two ways of their production, and everyone has their own pros and cons.Fill
Thermopanels with clinker tiles
The technology in which the special forms are placed by clinker tiles, after which the foam polystyrene foam is performed from above. After the long drying process, the polystyrene is formed with a monolithic construction with tiles.
The main advantage of this method of production is that with long-term operation, there is no separation, and as a result, the panel is much longer.
Minuses:
- Due to the complexity of manufacture, such panels are somewhat more expensive.
- In case of damage during installation, the polystyrene foam will be impossible to replace. Therefore, it is necessary to be extremely neat during transportation and work.
Slace
Clinker tile for outdoor decoration
Special glue is applied on the surface of the insulation and tiles, after which the compression of both materials is compressed with each other. This option is simpler and less cost, but as a result, the cons: more substantial:
- The service life is somewhat lower than that of bombed panels.
- Accuming under the surface of the moisture cladding can destroy glue, so it is desirable before assembling to produce waterproofing walls.
Important: Most of the Stroymarkets, such as Leeramer, are selling both of the thermopadals, but often do not affect it. Therefore, before buying, you must familiarize yourself with the material.
The Russian-working panels can be made by any of the listed technologies, as each of them complies with all European standards and quality standards.
Installation
Clinker tile for facing a private house
With frameless clad technology, first of all, it is necessary to thoroughly prepare the walls. For this, the surface is completely cleaned from the old finish and dirt. If the wall of the house has obvious irregularities or drops, it will have to be aligned, but more often it is enough to walk with facade soils and impregnations.
Article on the topic: "Flying" bed do it yourself
After that, at the bottom of the wall, the base guide is mounted around the perimeter. This is the most responsible stage of the finish with your own hands, as it is important to strictly observe the level of the base. Even a small difference can be strongly reflected on the quality and appearance of all overdoor decoration.
Next, in the left corner, the first panel is installed on the guide. Through special mounting holes, the wall is drilled, and a fastening dowel is driven.
Tip: If the wall is made of clay-concrete blocks, it is desirable to use the facade glue, which is applied to polystyrene foam and provides a stronger connection with the surface.
Facade thermopanels with clinker tiles for outdoor facing at home
Now the next panel is inserted into the grooves, and the fastening is also made. All segments are recruited around the perimeter of the house, after which you can come to the next level.
After the finishing of all walls is completed, the seams are grouting between tiles. As a result, a monolithic surface should be obtained.
Tip: Using clinker thermopanels of Russian production, grouting for seams should be the same brand.
Conclusion
Finishing the facade of a private house with clinker panels
As can be seen, the installation of clinker thermopanels do it yourself, not such a complex occupation, but still it is desirable to have at least some kind of skill. A particularly difficult stage will be roaming panels, clinker tiles are quite difficult cut, while polystyrene foam is quickly melting. Therefore, before starting work, it is better to practice on a separate segment.
Of course, the facade finish is not a matter of cheap, even if all work is carried out with their own hands, but buying clinker thermopanels, where both the tile and polystyrene foam production can be significantly saved without prejudice to quality.