After insulation of the house, a clinker tile for the facade or a porrite panel is glued to the top layer of plaster. It gives the building a unique view, protects the walls from destruction and serves as an additional thermal insulation. Modern technologies allow you to create the texture of various materials, artificial stone, torn brick, glossy surface with icing coated. For the base, plates are manufactured 600x600 mm and other sizes. As a fastener, glue and additionally klyamimers for mounting the ventilated facade are used.
Due to the special configuration of the tile and thought out to the smallest details of the subsystem, the installation process was made as simple as possible and intuitively understandable.
Clinker tile for finishing facades and base
Clinker thermopanel - promising finishing material for the facade of the house under the brick.
The first clinker was terracotta parquet in the south of Europe. In France and Italy, and now you can meet at home with floors from rough red-brown squares and rectangles. The manufacture was made from local clay. The artisan did a parquet with his own hands and distilled in a pottery oven. Tile facade began to do much later, with the advent of industrial furnaces capable of keeping the temperature of 1300o.
Especially strong ceramic facade tile is obtained after the clay solution is passed under pressure through the slot in the press. Air and excess water goes out. There is a dense homogeneous mass. After annealing in the conveyor furnace, it acquires its technical characteristics. At home, you can only make a terracotta plate.
For decoration of buildings, a facade tile under the brick is used. It is glued to plaster. Clinker panels on ventilated house facades are mounted using swipes - metal clamps. For the base, plates are coated with glaze of 600x600 mm and a rectangular shape with increased strength under artificial and natural stone, imitating torn material, erased surface.
Article on the topic: Peach Wallpapers: Designer Tips
DOPPORTERS from annealed clay
Facade tile under the brick
For finishing with your own hands facade and base, clinker siding has high strength. It can only be powered by a special diamond instrument. The work simplifies numerous quantities. These are deployed and concave corners and tiles of different sizes, inserts, planks for openings, flow and more. The facade tile has different shapes and it can be put on the displacement, representing the ligation of the brick masonry, due to the presence in the sets of the plug-in elements.
Facing tile for facades is used to finish stairs. Special edge panels have rounded shape forms - a protruding edge. For the riser use facade tiles with decorative coloring. It has rectangular shapes and size at the optimal height of the stage. It is used as a trim of the transition of the base to the walls of the house for separating zones with different texture of the facade siding.
Varieties of ceramic tile
Facing clinker tiles
The facade ceramic tile on the principle of manufacture and composition is divided into several groups:
- terracotta;
- clinker;
- Ceramographic.
In terms of application, divided:
- facades;
- base;
- Paving.
Common in the manufacture of all finishing materials: clay in composition and annealing for sintering particles and creating technical specifications. Terracotta parquet is made of red clay, sinters at temperatures up to 800o, has a rough surface. Can be used for finishing inside the house. It was made in the countryside to put on the floor instead of an expensive tree. Tile for the facade has a rectangular shape. She gradually absorbs moisture and keeps only a few years if it is not painted from above. The advantage of terracotta products could make them with their own hands. For floor 120x120 mm, the tracks are laid out by blocks 600x600 mm. Dimensions can be chosen independently. Forms make wooden and displayed by film.
Article on the topic: Interior of the kitchen and dining room from IKEA 2019 catalog (20 photos)
Panels and slabs from porcelain stoneware
Clinker tile
For finishing facade use porcelain stonewares. White clay is mixed with sand and other additives. The mixture in the manufacture is pressed in a dry form and sinters. It turns out a solid facing facade tile. The form is oblong and with the size of the parties 600x600 mm. It is used for wet and ventilated facades, finishing the base of the house. The texture of the artificial material repeats the smooth and aggregated brick, polished and torn natural stone.
Specifications are close to Klinker. Inferior in moisture resistance. Noise absorbs better. The facade tile under the stone has a form in the form of a square of 600x600, a rectangle 270x 480 mm. Used as siding and attached mainly on self-drawing through kleimers to the frame. Diamond circle is cut. If you have the desired tool, the facade panels from porcelain book can be separated by their own hands.
Clinker tile for base and facade
Porcelain tile for the facade with ribbon surface texture is used to finish the base and the whole house. Artificial stone is placed on the crude base of cement plaster and is fixed with glue. ACCORTED BRICK AND ELECTRIBLE TURNING STONE Large blocks betray a thorough form. Used porcelain stonewares for restoration of architectural monuments and historical buildings.
Ceramic panels Canyon
Clinker tiles for the facade and base of the private house
Facade tile Canyon is produced in Russia for almost two decades. It is made of color modified concrete. Artificial stone repeats masonry from natural materials and bricks. Ripped surface of the surface is suppressed by a jet of compressed air. Kleimers are installed immediately when making panels. Due to this, the work is simplified, and the facade tile with metal mounts protects the walls and foundation of buildings. Install artificial stone on self-drawing can be done with your own hands.
The company Canyon-North LLC leads among domestic producers. The product catalog is distinguished by manifold. Panels have a stepped with a seam overlap and a cone docking. Thanks to this, the concrete facade tile is easy to carry the temperature expansion without the formation of gaps and warping. The artificial stone of the canyon panels on metrophrophiff and wooden bars is attached. Especially popular from buyers tile for the facade with texture under the torn stone.
Article on the topic: What finish putty is better and how to apply it?
Methods for fastening clinker panels
Clinker tile for facade of a private house
Clinker thermal stillar has widespread use in the interior of the house. Beautifully look at the kitchen with matte plates 600x600 mm under a natural stone. Clinker facade tile is used for interior wall decoration. With it, it creates a decor of an old castle by elements of brutal masonry from ribbon bricks and aged stone. Facade tile under the brick and artificial stone is popular in modern styles of techno, Loft, High Tech, Avangard.
For decoration of ventilated structures, a clinker facade tile with metal fasteners is used. Kleimers are attached to an industrial way or when installed. Sizes 600x600 mm allow you to quickly install siding. For a larger effect of natural material, they use the oblong panels and are installed with the shift of the pattern.