Of course, it is important correctly and on technology to carry out the facade cladding. However, such works as the framework of windows is an important and final stage of all facing works. Correctly derived slopes and beautiful decorations of the house carries the facade of the house completed. It is a pity that many people do not pay due attention to these important trifles. Looking at the magnificent houses and their facades, I decided that I would not leave the windows of my dwelling unformed. I started viewing and selecting all kinds of framing options for my facade style.
Framing of the private houses
Beautiful window design is the eyes of the house
Facade of a private country house
Do not forget that framingo-broom directly depends on the materials that the facade is facing. Agree, if you use vinyl siding for the walls of your housing, the framing with a stone or stucco will look ridiculous and funny. It is still before starting installation work to think about the options for designing windows and remove slopes and combine the possible options with the facade decor.
The construction industry develops very quickly and the presence of a large range of ready-made architectural elements I was very pleased. To be honest, I did not even expect that the choice would be so large, and it will be so difficult to determine my desires. For myself, I highlighted several options for finishing windows, it is:
- Using wooden elements
- Brick framing
- A rock
- Materials of plaster stucco
- Plastic Profile Panels
- Polymer composite
- Ready elements made of polyurethane
A very large selection of ready-made details allows you to perform even the most original ideas, giving the appearance of the facade a unique look. But, despite the beautiful framing of windows, you should not forget about the slopes and their proper elimination. After all, not only the right installation of slopes inside the house, but also their outdoor improvement.
Article on the topic: how to choose a loop for doors with a fest
Framing of the 3rd floor window
Many people and I, among other things, are plastic windows. Everyone knows that they are installed using a mounting foam, which has bad thermal conductivity indicators and is short-lived. Therefore, it is necessary to protect it from the influence of external adverse factors. Outdoor decorationCon is performed for:
- Protection of all seams from moisture ingress, which leads to the formation of mold and fungus
- Preventing the destruction of the assembly foam, which is powerless to adverse factors
- Bringing the whole facade to impeccable appearance
Important! Separate discovery needs as quickly as possible after the end of the work.
By installing windows.
On their own removes
Decor facade of a private house in the village
There are several options for working with slopes that can be performed by itself. I used putty. First you need to prepare the surface to work for this:
- I, using the stationery knife, cut off the discovering and unnecessary pieces of the mounting foam, as well as cleared the place with the old plaster and paint
- After processed all the primer mixture of deep penetration. Do not forget that it will dry for a long time, so it is necessary to postpone the following work at least 12-15 hours
- Next, I needed a putty, using a spatula, I put it on the surface and scattered
- When the layer SNAH I inflicted another finishing and after drying with the help of a mesh grid, slopes
- At the end, you can drag the slope in the tone of the facade
In this way, the facing of the indoors inside the premises should be performed. There is a frost-resistant plaster, it is necessary to use it for external slopes. When they are smooth and firmly embedded all the seams, you can proceed to the decorative framing of windows.
Polyurethane Lepunin
Facade Decor Private House
When I chose the style of the facade of my house, I preferred a classic mind. I always had enthusiastically looked at home with clear, smooth lines, the presence of architectural elements and calm shades. Polyurethane elements fit perfectly into any style, whether classicism, stormy baroque or motley modern. Any types of ancient styles are combined with the finished variants of the framing of polyurethane.
Article on the topic: Rabatka is not just a flowerbed from past times
There are many details that are used for the window space, and some of them:
- Smooth or patterned cornices
- Moldings with or without drawings
- Basiames of decorative plan
- Console and Arki.
- Various pilasters
Framing of the second floor of the house with oval windows
It is possible to use both wide and narrow details. It is enough to use one tip - if the window is quite large, it is better to use a narrow stucco, and if it is small sizes, then with the help of wide elements, make it more noticeable on the facade. This material has plenty of advantages, so it was him that I preferred. Lightweight, unusual options, the possibility of self-installation and reasonable prices for decor elements, make stucco in demand and popular. In addition, facing in this way is durable.
Using elements from polyurethane, you can not only perform the framework of windows, but also create individual compositions on facade. Thus, the framing becomes an interesting occupation in which you can openly experiment.
Tubes for the window
Do not worry that the framing will not be durable, and its installation will require special
effort. Polyurethane is practical and very lightweight, even if you use large decoring elements, you can easily glue them on your own. And the ability to cut and handle it, makes the installation even easier. At home, where the window frame is performed from polyurethane stucco, look very beautiful and aesthetic. On average, the service life of the stucco reaches 25 years, sufficiently wash the elements as necessary.
Polyurethane products are not afraid of direct sunlight, sharp temperature differences, besides, they are not afraid of high humidity and perfectly hold the form throughout the term of use.
RESULTS
Fragment of the central facade of the house
When you plan to carry out the facade cladding, you should think not only about the materials for wall decoration, but also about all the design, in general. The framework of the window space is the last and final process of all installation work and it requires special attention. If you are still before starting the finish at home, about all the architectural details, then in the future you will minimize all sorts of design errors. If the house, the windows of which require framing from the brick, will ideally fit the option with the frame of hyper-sensitive or curly brick. But the finished platbands will be wonderful on wooden houses or on the facade, made by siding under the tree. The framing can be made independently, but if you are not sure about your abilities, you should contact the specialists who will help not only carry out installation, but also prompt the best solutions.
Article on the topic: How to make a staircase from a tree to the second floor?