According to the rules, after installing plastic windows, the protective film must be removed within 10 days. This is due to the fact that the film in direct contact with the frame is very thin and gentle, and under the influence of sunlight and high temperatures it is destroyed. As a result, we see "tightly" the sticking composition, and the longer it is not removed, the stronger will be silent. Therefore, it is better to remove protection on time.
How to remove the film from plastic windows? What is needed in order to clean the surface and do not give adhesive and stick even stronger? And what should I do if it did not work on time to remove the protective film from the window? There are a number of ways to solve this problem.
How to remove sunscreen from the window
If you decide to fulfill everything you need, in a timely manner, the film will be removed much easier. How to remove the film from plastic windows and not damage the material? Take advantage of one of the above methods that will solve the problem at home, without the help of specialists.
"Kosmofen"
This is a special solvent that can be bought in a firm setting plastic windows. There are 3 species of "Cosmofen", different from the degree of exposure: No. 5, №10 and №20.
The strongest is number 5, and with careless use you can "dissolve" not only the adhesive basis, but also plastic itself. Therefore, it is better to take advantage of the least aggressive composition.
In the process of work, follow the instructions for use, and remove the protective film will not be much difficult.
Article on the topic: Maracas Papier Masha do it yourself
Knife, blade or scraper
Applying sharp items, keep care and do not damage the surface. The edge of protection is raised by a knife or blade, and the remaining part is removed by their hands. Remember, the less you include cutting accessories, the less damage will be on the plastic.After you remove the film from the plastic window, there may be noticeable traces of glue on the surface. You can wash them with a rigid sponge and any foaming agent.
Construction Fen
How to remove the sunscreen film from the window with a construction dryer? Observe the main rule: removing the protection, direct the air stream only on the frame without affecting the double-glazed windows. Otherwise, glass may not withstand the temperature difference, and cracks will appear on it.
The mechanism of action is simple - under the action of heat, the adhesive base softens, and its removal does not take away from you. Similarly, you can use a steam generator or a typical hairdryer. The latter is effective only in cases where the film did not have time to stop hard.
Solvent or White Spirit
Before applying one of these funds, test its action on an invisible surface area. If the chemical does not harm the plastic, you can start working.How to remove a protective film with plastic windows and clean the surface with a solvent or White spirit? First, you will find the edge of the protection, and then apply the substance into the gap between it and the plastic. Thus, gradually clean the entire surface.
RP6 paint removal
You will need to apply to the surface with a thick layer and wait 7-10 minutes. During this time, you will notice that the remnants of protection begin to "bubble".
After that, put the gloves and points and remove the film from the plastic. The remains of the means and adhesive base can be washed using a concentrated soap solution.
Article on the topic: Bat of paper with their own hands on Halloween with templates
Rigid brush and soap
This method is effective in cases where the window is from the shadow side. The adhesive basis does not have time to heat themselves, and its hitch with plastic is not so strong.Prepare a solution of warm water and soap and submit protection remnants using a rigid brush (not metallic!).
Denatured alcohol
How to remove a film with plastic windows with denatort? Fill the substance into the sprayer and evenly "irosite" the surface. After 3-5 minutes, it's up to the edge of the film with a knife and gently remove it with your hands.
When working with a chemical, be sure to protect the skin with rubber gloves.
Detergent "Shumanit"
This chemical can be purchased in a shopping store. Clean the plastic, strictly following the instructions for use, since this substance has a very strong action.After processing, wash the purified area with clean water and wipe the softer tissue dry.
If, after removing the main part of the protection on the surface, its small "islands" remained, take the usual eraser and extinct the surface.
Why does the film beeps?
How to remove an old film from plastic windows, if she dismissed "tightly"? To begin with, it should be sorted out for which reasons it happens.
How to remove the old film from plastic windows if she dried
How to remove the old sunscreen film from the windows, if it adhered? You can use the following options:
- Contact specialists, at the disposal of which there are special means to solve the problem quickly.
- Take advantage of a special scraper designed to purify plastic and glass surfaces.
- Apply a solvent of a strong concentration, having previously tested it on an imperceptible piece of plastic.
- Use a means for washing dishes and a sharp knife. Moisten the surface of the surface, and when it is a bit "offset", remove the protection with a knife.
- In some cases, the chemicals used to clean the kitchen plates help to remove the old protective film. The principle is the same as in the case of gel for dishes.
Article on the topic: Autumn crafts with their own hands from natural material with photos and videos
How to remove the old film quickly and without much difficulty? Please note one nuance: in sunny weather, when the windows are well warmed, it will be easier to remove it. If you do not want to wait for a suitable weather, before starting work, warm the window using a hair dryer.