High-quality installation of the shower cabin requires strict compliance with all manufacturer's recommendations, the implementation of measures to protect the premises from possible leaks. The question becomes especially serious if the installation of a shower tray is performed with its own hands in a multi-storey house, because the wrong device will lead to a damage of repairs near the neighbors below.
Installation of a shower tray should be carried out carefully and in accordance with all the necessary requirements, otherwise you can flood your neighbors.
Types of pallets: Nuances of operation
Shower boards and corners recently become very popular, as it saves not only the already small space of the bathroom, but also it becomes possible a wide range of functions, for example, hydromassage procedures, aromotherapy, vaporization, musical accompaniment and much more.In addition, the set of samples implemented in the construction markets allows the buyer to choose exactly the option that will be perfect to the interior of the bathroom and meet financial capabilities.
A wide variety of shower pallets in the form allows you to choose exactly the option that is suitable for a specific interior of the bathroom.
Installation can be carried out as invited masters who know everything about the correct installation of shower pallets and other elements of the equipment, and personally. However, it is necessary to first become familiar with all the nuances of the performance of work.
Pallets in their design are different. The most expensive and durable in addition to the pallets from the marble is the cast-iron pallet, and only after all the others go. In fact, all pallets have relatively long service life and high strength characteristics. A ceramic pallet will be distinguished by special beauty and uniqueness, but such pallets of the road and unstable to mechanical damage.
To date, acrylic pallets for the soul are the most accessible and popular. But with the loads, they begged, as a result, the installation should be made using special framework brackets for fastening, adjustable legs and other elements that ensure the correct installation of shower pallets.
Article on the topic: Bathroom design 6 square meters. M.
Cheap shower pallets from acrylic without supporting the base and central part, fortified only around the perimeter, may not cope with the load and burst.
Therefore, in order to properly set the pallet for the shower - and it does not depend on who performs the work, whether it is a brigade of masters or an independent installation of the shower, - you need to pay special attention to strengthen the bottom of the pallet.
If the set of frame base includes only extreme legs, then the pallet in the bathroom will require the manufacture of additional supports. This work can be made independently, the design is easy. To do this, you will need a piece of metal pipe, a box tube of the required length and a rubber gasket.
How to set a soul pan: installation and its features
Scheme samples for installing a shower pallet.
If the installation of the pallet is performed with their own hands, then it is necessary to align with particular care and adjust its legs. They should be set in accordance with the unevenness of the floor. The procedure for the assembly work is usually described in detail in the attached instructions and includes the installation of the pallet (plastic or metal trough), connecting the drain mechanism and the withdrawal of sewage drains.
Installation of doors and walls of cabins (if available) depends on the type of design and may include installation of an electric or water connection. Upon completion of the work, control tests must be carried out (especially for multifunctional units).
Quality control (managed to correctly install the soul pallet) can be performed as follows: you need to get up onto the pallet, and if it cracks and begins, refinement is necessary.
It is very easy to fasten the pallet in the bathroom, setting the support bricks under its base.
After putting the pallet in a horizontal position with a level, for the additional strength of the bricks, it can even be put on the solution.
Failure to comply with the above rules can lead to a damage of a pallet for a shower of acrylic. Although acrylic pallets are subject to repair, they do not want to carry extra expenses.
Article on the topic: Bathroom 2 square meters. m. - Small secrets of successful design
If it is necessary to repair the pallet for the shower cabin, after pre-alignment, use enamel for baths, fiberglass and epoxy putty or mastic. Of course, the appearance will lose its appeal.
The installation of shower pallets from marble, ceramics and cast iron is not so common. However, steel pallets are quite popular. Often the installation is performed without any walls or doors, only a protective curtain is set. Although it is a rather economical option, but it requires facing of the notged sides, additional sealing and hydraulic protection.
Steel pallets, as well as acrylic, must be put on a metal frame (bottom of the trough must be thoroughly fixed), elements of plastic supports or ordinary bricks.
To further insulate and compact the base, the space between the trough and the floor can be filled with the mounting foam. But it should be understood that this will create certain difficulties during repair or dismantling.
Shower pallet for brick and concrete bath do it yourself
Many are wondering why you need a bath, because sometimes it is simply not enough forces. And the rest of the time to wash, you will have to high raise your legs, balancing on a slippery shown by enameled coating, risking your health.
This is the reason for the increasing popularity of shower cabins.
Hydrosing the shower pallet: 1. Drain pipe, 2. Hydraulic, 3. Drain hole of the shower, 4. Frame of shower.
For the device of the pallet for the shower with your own hands, you will need:
- cement;
- sand;
- Mosaic on paper;
- bricks;
- silicone sealant;
- building level;
- toothed spatula;
- nippers;
- Rubber spatula.
The souls must have a serviced siphon: if a blockage occurred, the siphon should easily be removed, and the pipe is calmly cleaned with a brush or cable.
Important! The bottom of the soul pallet must be non-slip.
Of course, you can buy a finished pallet, but more satisfaction will bring the work done by your own hands. It should also be known that the acrylic pallet over time loses its color, and the enameled is pretty slippery.
Article on the topic: Pan drainage concrete with grille: reinforced concrete, rain, installation
Plastic pallet installation circuit.
Stages of work:
- Preparation of the surface. Bituminous mastic is applied to clean floor. It is needed so that the brick does not die over time.
- Polyethylene film is placed on top of the mastic.
- Get brick. It is better to use a red clay brick, as it is moisture-resistant.
- Masonry is performed, and the bottom of the shower ladder must be installed through the removal into the sewer system. Note! The removal should have an angle of no more than 30º, otherwise, it will be very difficult to be cleaned.
- Corners are better to do smooth - both for beauty, and not to get serious injuries. Masonry can be done on the eye. It is better to use thick-layer tile glue type EK-1000.
- After 3 or 4 days later, the hydroform tray is covered by another layer of mastic.
- A concrete screed is satisfied with such a calculation so that the water falls into the shower ladder, that is, the bottom must resemble a rectangular funnel having a small slope to the center (1-1.5 cm). For work it is better to use plaster beacons. Important after the end does not forget to take them out.
- It will be convenient to lay out the pallet inside and outside the mosaic on paper or grid. It is much easier than putting the tile. With the help of a small gear spatula, tile glue is applied to the surface. Then the sheet is stacked with a mosaic paper upstairs. All squares are thoroughly pressed with their fingers and go to the next sheet. With the help of ordinary bodies, triangles and other angles are formed.
- A few hours later remove the paper from the tile. To do this, it is pre-wetted with a wet rag.
- With the help of tile glue and the rubber spatula, all the gaps are rubbed. Sticky surplus should not be removed immediately. It is possible to do it in half an hour, having taking the wet rag on them.
After the end of the work, the shower should be taken only in a few days, and during this time you can install a curtain or make doors.