Scotch is a very useful invention. He often eliminates the need to watery a hammer, a drill or use expensive superchalter. In addition, he is worth a penny and everyone can afford such a purchase.
However, there are also minuses when using adhesive tape: its base leaves sticky tracks on the surface and get rid of them is not easy. How to remove ordinary or bilateral scotch without damaging what it was glued to what it was glued? How to extort a sticky basis that literally attracts dust particles and small garbage, not wanting to get out of the surface as a result of washing with water?
Than tip bilateral scotch
In order to remove the adhesive tape from the surface, you can use a special spray or liquid, which you will find in household chemicals. But if you cannot purchase a tool for one reason or another, it is possible to solve the problem with the help of priests, without material costs.
Stationery Earth
This item that can be borrowed from a student schoolboy portfolio will allow you to solve the problem quickly and effortlessly.
With a smooth and solid surface, remove the traces of the scotch will help the eraser.
Treat the surface with the traces of the scotch, just rolling the sticky base in the lumps. Then wipe this area with a napkin. However, note that this method is good for solid and smooth surfaces. Removing traces of adhesive tape with fabric upholstery of furniture in this way is strictly prohibited.
Rubber Hand Drill
The principle of operation of this method is similar to the previous one. The difference lies only in the fact that you make less physical effort.In addition, the use of a drill makes it easy to erase a plurality of tape trails in a short period of time.
The heating
You can use the household hairdryer to clean the surface with the heating method. However, this method is suitable only in order to clean the adhesive base from heat-resistant surfaces.
Heat sticky traces, holding a hairdryer at a distance of 5-10 cm, and when they become soft, erase the remnants of glue with a foam sponge or a rag of dense tissue.
Chemicals
The solvent and gasoline copes perfectly with the traces of the scotch, but have a very sharp smell.
When cleaning the surfaces from sticky traces, you can use a gasoline or chemical solvent. These two tools are equally effective.
Article on the topic: necklace of leather with their own hands
Apply a chemical on your cotton swab and treat a contaminated surface. The glue will dissolve, and its remnants will easily "stop" from any surface.
By the cons of this method, the aggressive effect of chemicals can be attributed, as well as a sharp eager smell.
Windows wash liquid
Liquid for washing windows removes tape traces from any surfaces.
This tool will perfectly cope not only with the traces of glue, but also help to easily remove the sticky tape from the surface. The efficacy of liquid for glasses and mirrors is due to the fact that it contains alcohol and foaming substances that successfully dissolve adhesive traces.
In addition, the means is harmless and use it can be used to remove the tape from any surfaces.
Vinegar
This solution is no less aggressive than the solvent, but does not leave a strong and resistant odor. Using vinegar, you in minutes to get rid of sticky tape and adhesive tracks on the surface.
Vinegar can be used when cleaning tiles, metal and plastic surfaces, glasses and mirrors.
Vegetable oil
The fat basis of any vegetable oil will soften the adhesive traces, which will easily remove them with a cloth.
After the oil soften the glue, you need to wipe the traces of soapy.
It is better to use oil on horizontal surfaces. Pour it on the stains from the glue and leave for 15-20 minutes. If you need to clean the vertical surface, moisten the cloth and wipe the necessary sections.
After the glue becomes soft, rinse the traces of soapy. You can use liquid or economic soap, as well as washing powder or dishwashing liquid.
It must be borne in mind that for different materials you need to pick up various means to get rid of glue traces without damage to the surface.
How to remove glue from tape with plastic
Plastic refers to materials capable of transferring the impact of various means, including aggressive chemicals. To clean such surfaces, you can apply the following tools:
After processing, you will only wipe the plastic with a damp cloth and there will be no trace from the tape.
Baking soda
This tool is almost universal and indispensable in the household. Soda will help and clean the traces of glue from the scope. Prepare a paste from a small amount of soda and hot water and apply to the surface. Then, with the help of a sponge, carefully clean the plastic, and then you need to wash the composition with water. Soda believes glue instantly.Vegetable or essential oil
The adhesive base is sensitive to the effects of fat (not in vain before sticking to something, they recommend to degrease the surface!). Therefore, if you need to clean the plastic from the tape, the vegetable oil is ideally suitable. Apply the fat mass on the surface, and leave for 10 minutes. During this time, the oil neutralizes the adhesive substance, and you will only remain wiped the peeled seat with a sponge.
Article on the topic: Vase from a bottle with your own hands: Master class with photos and video
Similarly, essential oils are used to remove traces of the scotch. Just keep in mind that the composition is needed without dyes (for example, the sea buckthorn oil is better to leave for another case), otherwise the surface is painted and it will be difficult to wash it.
Ethyl, ant or salicylic alcohol
Remove traces from the tape on the plastic can be with the help of these means. The compositions are applied using a cotton tampon, which is rubbed the surface until it becomes clean. It is important to change the sponges as pollution and you can easily clean not only plastic, but also another surface from sticky tracks.How to remove glue from tape from furniture
Boxes, doors and other details of furniture often fasten your scotch before transportation. It helps protect the headsets from unnecessary damage, but as a result, the owners have to face another problem - how to get rid of tapes and sticky tracks on the surface.
Hair dryer and eraser are the safest means to remove traces from tape from the tree.
If the furniture is painted or covered with polishing, vegetable oil is suitable. With it, you get rid of the tape without damaging the surface. However, it should be remembered that this method cannot be used to clean the cabinets from the untreated tree. On such material, the fat basis will leave the dark spots, to get rid of which is almost impossible.
What to clean from the scotch household appliances
When buying a refrigerator, a microwave or vacuum cleaner, we get a lot of stickers on the surface as a "bonus". What to wash glue from tape from these items? To remove them, take advantage of the following compositions:- ethanol;
- detergents for windows;
- composition for lacquer removal;
- acetone;
- vinegar.
As you can see listed substances are aggressive. For this reason, it is necessary to first test them on an inconspicuous area of the coating, and then proceed to cleaner from the tape.
How to remove adhesive glue from clothes
Often, ugly adhesive traces remain on the clothes with which the price tag is removed. What to do in this case? It should be noted that oil-based formulations are not suitable. From traces of Scotch with their help, you will get rid of easily, but in their place there will be fat traces.
Examine the product label. If the fabric is dense and does not contain synthetic impurities (or they are present in small quantity), you can do the following:
After processing, the purified area must rinse from the solvent, and then wash clothes, and send to the air.
Article on the topic: Rabbit-Spool. Knit crocheted toy pillow
If you are afraid to apply solvents, or testing of these funds in a small area showed that the composition is not suitable for this type of fabric, use tape. Attach the tape to the adhesive tracks, and then remove the sharp movement. To remove the glue composition, you will need to repeat the manipulation several times.
The described method is good for things that are sewn from smooth materials. But what to do if the fabric is darling? Use a special machine to remove rollers and simply "wipe" glue. Please note that the processing will have not only a problem space, but also the thing is entirely that this site does not look "Pleshy".
Than laundering tape from glass
Acetone will help withdraw tape traces from glass surfaces.
By purchasing glass products, you can buy special means in the same store, with which you can remove the adhesive tape easily and quickly.
If you have left this question when buying, you can get rid of the scotch and independently. To do this, you can apply the following tools:
With such surfaces, it is delicately treated, since a great risk of damaging them, leaving scratches, cracks or chips. In addition, some compositions can be blurred and covered with dark spots.
- Composition for washing windows. Apply a means on the adhesive basis and leave 5-7 minutes on the glass. During this time, the glue is dissolved and you will easily spend it with a cloth or sponge.
- Ammonia. In the previous times of the hostess, a solution of ammonia for washing windows was used, and in our time this agent is applied in the household. Apply the composition and spend scotch from glass without applying big mechanical effort.
Sometimes recommendations are found to remove traces of tape from glass with solvents, but this method is not safe. Capricious material can darken and covered with spots.
Using chemicals, check their action on a small surface area. If the tool caused the glass, proceed to cleans the problem area.
It is forbidden to remove the tape from the glass with the help of pylons, knives, butter, drills.
It is undesirable to apply mechanical methods for glass surfaces, namely:
When using listed funds, you risk damaged a fragile surface, leaving scratches and cracks on it, dark spots and clouds, and in the extreme case you can smash the glass.
Remember that it is easier to remove traces while they are fresh. The older than the spot, the more it is entrusted to the surface, as well as the dust lip off to him, which complicates cleaning. Therefore, try to remove traces from Scotch immediately, and you will not need to make a lot of effort.