The apartment first acquire an ugly view of the corners and other protruding elements of the walls. They are scratched with various objects and erased the surface. To preserve the aesthetic species and protection against the destruction of the edges of the openings, the arches and other sections, plastic corners for the walls are used. They have a different size. There are decorative and just white or transparent. With them the interior looks better.
Plastic corners white
Why level the angles of walls and openings in the interior
Vadik Build a house. He is a scientist, but physically developed and very curious. I have a small firm. We are friends with no long. Therefore, the construction is carried out by the forces of my brigade or we first spend your free time, engaged in its country cottage. I make a qualified work. Vadik fulfills the duties of the priest and deals with self-development.
Before the start of the interior, the question arose about color and white plastic corners for walls and openings.
Friend I wonder:
- What are they needed for?
- Where are attached?
- What are there?
We went with him for some objects, where the trim of the corners has not yet been completed and they are curves. The interior had an unsightly appearance. A few days later visited the same rooms after the completion of the alignment of the corners. The impression is completely different. Regardless of style, the wall decoration had aesthetic appearance. The rooms looked more cozy even without furniture and with unfinished finish.
Smooth decorative corners come to the interior completion. Walls and openings look careful. The room visually becomes higher and spacious.
Smooth decorative corners come to the interior completion
Way to protect corners in the house from scratches and scuff
In the building they are the first to suffer protruding angles of walls. They are constantly torn by hand and shoulders, scratch items. Plastic color corners are superimposed to protect. Durable material has high wear resistance and hardness. It retains his original appearance for a long time.
The profile hides under him small irregularities. The wall lines acquire clarity. All shots occur on the corner protection element. As a result, the wallpaper and other wall decoration longer retain a fresh look. Repair is postponed for several years.
All shots fall on the corner protection element
Views and sizes Corners for walls
By applying plastic corners are divided:
- finishing for outer angles;
- arched;
- for ceramic tiles;
- Profile Plank - Bath Corner;
- Ceiling corners;
- Naschelniki for windows and doors;
- for external and internal angles under the plaster;
- decorative;
- Furniture.
Article on the topic: Selection and use of oil for floors - Important nuances
Corners are stronger than wallpaper. Superimposed on top, they protect them from detachment. The selection of colors is available on sale allows you to choose the tone exactly under the finish or contrast to emphasize the lines of the openings. For walls, covered with board or clapboard, there is a large selection of products with coloring for various wood species. At the same time, the ends of the finishing material are reliably protected from dust and moisture.
Decorative corners of PVC
After visiting several building stores, my friend made a table of sizes and the use of plastic and other corners.
Basic use of corners | Dimensions, mm. | Thickness, mm. | Color options |
Furniture, ceiling, plinth, PVC panels, MDF | 10x10 | one | White, Metal, Bronze |
15x15 | one | Colored | |
20x20 | 1,1 | Colored and decorative | |
Corners of walls, openings Different types of finishes | 25x25 | 1,2 | Colored and decorative |
30x30 | 1,3 | Colored and decorative | |
40x40 | 1,6 | Colored and decorative | |
Wooden walls and facades | 50x50 | 1,6 | white |
arched, multi-level ceiling | 5x17 | one | White, Colored, Decorative |
12x20 | 1.0; 1,3 | Colored, decorative | |
arched | 20x30 | 1,3 | Colored, decorative |
20x40. | 1.3; 1,6 | Colored, decorative |
For wall profiles are made from:
- PVC - polyvinyl chloride;
- polyurethane;
- MDF - wood fibrous material;
- Aluminum and its alloys with different coatings.
Paint is added to plastic corners for openings and walls in the manufacture. Therefore, they do not burn out, remain bright. When I want to hide the presence of finishes, choose transparent elements and glue by their corresponding silicone.
Finishing of corners and arched openings with decorative corners
Arched plastic profiles are highlighted from a total range of different sizes and flexibility. On the openings with smooth lines, they are stuck without cutting. Color and decorative are available. To protect the angles, use on tone darker than wallpaper or paint on the wall. The line of the arch appears more clearly, emphasizing the style of the interior.
If there is wooden floors and laminate in the room, imitating your drawing board, it is appropriate to choose decorative arched tree profiles. Get your drawing and color polyurethane corners in the manufacture. Dyes are part of the material. Additionally released laminated products to protect corners.
The width of plastic color elements is chosen depending on the size:
- Arch itself;
- premises;
- ceiling heights;
- Wall thicknesses in which the opening is made.
The more listed interior parameters, the corners must be wider. Narrow can be lost among large elements. Wide will look unnatural in a small hallway with a narrow opening and thin partition.
Arched plastic profiles are highlighted from a total range of different sizes and flexibility.
Article on the topic: How to choose a grinder: varieties
Features of finishing with colored corners of arched openings
Plastic corners for the arches are available up to 3 meters long. One strip for finishing is not enough. Shakes with time will be noticeable. Therefore, I make them symmetrically. I do not dact one piece where you have.
The upper arc stick from the center of the Arch and the middle of the corner in both directions. Then symmetrically shy on the sides. I cleaned the ends and glue them. After a few years, the compounds will be noticeable, but they are symmetrical and angles will have a good look. Arch looks aesthetic.
Plastic corners for arches
Colored Corners for Tile
When the question arose about buying non-ferrous corners for tile, Vadik asked his traditional question "Why?".
I offered him an alternative to all rectangular joints:
- paint the tiles to paint ends;
- close them by sticking the finishing strip;
- Leave in a natural form to collect dirt and dust.
I present all the options, my friend began to help me, make calculations. I am a supporter of the simultaneous purchases of all necessary materials. In the event of a problem with finance, I recommend buying a tile by parties by destination. All on the floor in the bathroom, then on the walls and so in everything. Then make measurements and purchase finish.
Forest profile for tile
We were simulated with each other all the transitions where tiles ends can look out:
- Niche in the walls;
- steps;
- Door and window openings without platforms;
- Podium near the bath and under the shower;
- half colonents.
All sizes were in a table indicating the place, the colors of the tile and its thickness.
Colored corners for tiles are made of aluminum and its alloys. The metal is covered with various chemical and thermal methods, polished to the mirror gloss, apply varnish or laminated. As a result, the protrusions are reliably protected and decorated the room.
One side of the profile represents a perforated strip with cuts. It is placed on the surface of the wall or stage. The second is decorative, with a small inner protrusion on the back. The side end of the tile is inserted into it when laying the corners. He must come tightly.
In addition to decorative design, the profile for the tile solves the level of alignment when finishing. For protruding angles there are tripartite decorative elements. They close the compounds in three planes and are installed at the junction of two finishing profiles located at 900.
Corner for tile
Universal nicknames for windows and doors
In the description of the nachets, the size of one side is indicated. The second is narrow and designed to smooth the corners, their rounding. At the same time, such a design allows you to tightly lay down the strip in the places of docking the frame with the wall and close the slots. The material of the corner is selected under the frame.
They are produced:
- polyurethane;
- polychlorvinyl;
- wooden;
- metal;
- MDF.
Article on the topic: Homemade outdoor and pendant lamps do it yourself in one style
Protective profiles produced white, colored and decorative. Metal and MDF is recommended to be installed outside. I use them for finishing windows, doors, loggias and balconies. Naschelniks are more reliable than other materials protect the mounting foam from sunlight and moisture. Beautiful look. They are not a mandatory element when cladding slopes. You can use the sealant and putty with the subsequent color. But with them the windows and balconies acquire a complete view.
Naschelniks are more reliable than other materials protect the mounting foam from sunlight and moisture
Corners for bathrooms
Plastic corners for sealing the junction in the wall touched the wall is mostly white. You can also apply colored, under the tone of the bath, if the bathroom has modern design. Use the equilateral profile bar from polyvinyl chloride, resistant to moisture and temperature drop. Mounted profile from above and under the tile. Secily protects the walls from moisture. Eliminates the formation of fungus.
Colored and white plastic corners are used in bathrooms for sealing concave and convex angles of walls, installations, washbasins, shower cabins.
To set the corners under the tile, for the font and sink manufacturers produce white borders from PVC. The angle in them is replaced by a beautifully curved radius. When installing, it hangs over the edge, and water flows into the bath. The wall at the bottom remains dry.
Plastic Corner for Bathroom
Profiles perforated for internal and outer angles
To align the angles during plaster and trim plasterboard, perforated plastic profiles are used. They are installed directly into the solution, on the sheets of finishing and serve as beacons. At the same time, the joint of the walls is strengthened.
For external work use metal. Plastic products are comfortable in case of finishing not direct angles. They are plastic along the bend line.
To align the angles during plaster and trim plasterboard, perforated plastic profiles are used.
Corners for ceilings and plinths
After closing the frame of the suspended ceiling, the PVC film or plasterboard, the ledges for hardening are separated additionally. Bent elements are used to enhance the fit of the plinths. Color to tone facing.
Plinths are designed for dense adjacent to the wall. However, there are cases when pipes or wires of a warm floor system are hidden under them, it is necessary to leave a big gap to expand the laminate and linoleum. I closes the slot to the profile in the tone of the fnethood itself. Correct the corner to another surface, leaving the possibility of a material to move freely at the temperature deformation.
Polyurethane profiles with a side of 10 and 15 mm are used to finish the angles of multi-level ceilings. They are easily bent, repeating the form of the protrusion. Most eleged white. The profile is not a mandatory element of strengthening protrusions at the overlap. It is rarely used in cases of necessity.