Mosquito net from cable channels do it yourself
Spring came, and with her mosquitoes. The balcony has an aluminum sliding window. There was no mosquito net to him, so I wanted to buy a factory, but learning the price, refused and decided to make homemade.
Start.
We buy in the store Cable Channel 25 * 16-3pcs 2m, 15 * 10-1rst, rivets, grid and corners. Corners take such a calculation so that they are easily inserted into the cable channel. I found only such:
But having experienced their homes, it seemed to me that the design would be slightly chlipky. Therefore, at work there were corners of fiberglass in width of the channel cable.
Skaps and a caspinel himself.
So ... we are determined with the dimensions of the future frame and begin to cut the cable-channel under 45 degrees. To unsports a chair, he is a temporary workbench))), as a substrate used a bar 20 * 20mm.
Sawing, sawing and get this item. By the way, I remembered the cable-channel with the function of the camera late, so the part of the carcass collected prompts the moments of its assembly.
Scolded, trying on. It seems everything is fine and smooth.
Insert the corner into the cable channel, drills or picking (the plastic soft, everything is picking easily), insert the ripples and rivet. As a result, it turns out such a beautiful conjunction.
Houston, we have problems !!! The cloves of the ripples broke away where it was necessary ((
We can take on both sides.
We try. Outdoor tile was used as the parliament.
After the riveting, we get smooth, beautiful on the kind of conjunction.
View from the inside of the Channel Cable.
Top (or lower) part in place.
Collected frame.
In the process of manufacture, it was decided to add a jumper for rigidity to the carcass. For this purpose, two T-shaped parts were cut from fiberglass. There is no cutting out the cutting of the hole for the part, but everything is simple, neatly the stationery knife cut out to be cradle.
Article on the topic: Flooring is your own hands: Wooden painted cyclishing, such a video for the board, the tool is old
ATTENTION! Fingers! You can cut two times.
Jumper in its place.
The most important thing begins. You need to pull the grid. Here, the wife comes to the rescue, he himself ((. There is no stretching process, since the hands, legs and healthy items were busy. We take a mesh with a 2-5 cm. We stretch the grid so that there is no folds and provisions. To the cable channel (the upper part of it) did not open during operation before it snaps into it by dripping on it every 10 cm super glue and quickly put it in place.
After the stretch and assembly, we cut off the excess grid flush with a cable channel.
Type of ready-made mosquito net. Next, inventing how it will be attached to you on the window. I did it like this: on top of the same fiberglass cut and scalked guides (ears, spikes, call as you want), from the bottom of something like an eccentric. When inserting a mosquito net in a window frame, it hits the upper guides between the frame and the window sash, and the eccentric is made in the bottom of the eccentric so that they also fall between the frame and the windows sash. The grid is dead, but when necessary, it can be shifted to the left or right.
Mosquito net in its place.
That's all I wanted to say.