The next stage after the construction and conduct of communications systems in the building is the interior decoration of the house from the bar. This task is not the most simple, but with the right approach you can make it easier for yourself, and prevent common beginners errors. The main thing is to determine the sequence of installation work, select the appropriate material and correctly make the laying throughout the perimeter of the room.
Front of work inside the brusade house
The interior decoration of the brusade house begins with the preparation of the work plan and the installation scheme of the finishing material in the room. Depending on the various factors and features of the house itself, a sequence of actions can be changed, a way of laying cladding, fastening methods, but there are a number of general rules that should be followed.
First of all, installation works begin with floors. In this place, most of the systems of communications, insulation, sound insulation and similar installations. During work, you also need to provide comfortable and convenient conditions. By making the floor, the owners will be convenient to work around the room, without worrying about where to put the leg in order not to turn it out.
You can make a temporary coating if you have not yet installed insulation. In this case, it is important that the floor bar does not stick and did not fade. You can fix it with nails in several places so that it was convenient to dismantle the boards.
Do not mount the plinth along the perimeter of the room, if you have not yet finished raising the floors. Interior doors are installed in front of the main installation work.
After the wooden floor is laid, it will be possible to carry out the processing of a bar with special antiseptics, refractory impregnations, close the locations of the joints and the gap. After the floor, the walls are fitted. Before mounting on the crate, you need to carefully measure all the dimensions of the parts so that it does not work out the large slots between the joints. At the final stage, the installation of the ceiling is performed.
Article on the topic: Fire doors: Specifications
If you have never been engaged in such work yourself and want everything to be done quickly, it is better to immediately contact professionals. Of course, this is not a cheap service, but you can be sure that everything will be fulfilled correctly, in accordance with all technical standards.
Wanting to do everything yourself, prepare the necessary tool and the corresponding number of building material under your room area. You need to choose the future design of the room in advance, and think over all the details of the interior.
Video "How to do"
From the video you will learn how to deal with the finish of the house inside.Features of finishing
The decoration of the brusade house inside is performed using the same materials as in other buildings. The work requires the attentive approach of the owners, if they all want to do their own.
There are some features that you need to know in advance.
The most important factor - after the construction of the house from the tree, it is necessary to wait a certain time to go through shrinkage. The primary shrinkage of the profiled bar can go through a month. For wooden designs, the shrinkage is a very important factor, since the stone or brick buildings the coefficient is not so critical for further finishing works from the inside.
The degree of shrinkage depends on the climate in your region, the level of humidity, the average temperature in the season, the type of wood, its thickness and many other parameters. Depending on this, the process time can be significantly varied - from 2 months to 3 years.
The secondary shrinkage is not critical, as it will affect the height of the floor slightly - up to 1% of the total height.
Choosing materials
For the interior decoration of the room, quite a lot of different materials can be used, which differ from among themselves not only worth, but also ease in the installation, appearance, heat-conductivity and other parameters.
Article on the topic: What depth can raise the water submersible pump?
Most often for internal decorating and lining of a wooden house, cladding, wall panels are used. This material is relatively not expensive, easy to use, light. In addition, in specialized stores, you can choose a form, relief and even a color gamut.
Natural wood is much more expensive, but with proper processing and caring will last longer.
Floor floor
To lay a wooden coating on the floor, it is necessary to make blanks and marking. Before starting installation work, you need to make sure that the draft floor is even, and heat and waterproofing do not interfere with the future flooring. All unnecessary elements are removed or hiding under wooden lags so that there is no damage when fastening wooden boards.
Thermal insulation is a very important stage in work. Until the installation of this item is finally complete, the board is not desirable.
To finish the floor, laminate, parquet or planed sheet lumber are usually used. Choose a material according to the color scheme that will be well harmonized with walls and ceiling. Pay attention when purchasing on labeling (degree of heat transfer), which may indicate the special purpose of the heated floors.
Wall decoration
If you decide to use natural boards from the walls to finish the walls, then a special browning machine can be used to obtain billets. You can separate the inside of the house not only by the bar, but also choose another material that will be harmonized with the floor and other elements indoors. Wall panels, lining, plaster, drywall and paint are often used for work.
Usually, wall decoration is made on a special wooden crate to which cladding elements will be attached. This is a special bearing frame mounted on the wall. It screws up drywall, lining or other materials. Power of fasteners count on the basis of the finish weight.
Article on the topic: Fashionable design options with dark doors and light floors
When you finish laying the floor and walls, you can cut the plinth under the corner and measure it before consolidation. It is important to do this after the walls are already ready. Otherwise, an additional thickness of the walls will need to cut off the blanks.
Finishing the ceiling
It is advisable to stylize the ceiling under the bar, and not fix it in a natural size. It is now very popular to decorate the ceiling beams from wood, polyurethane or polystyrene, especially if the dwelling is drawn up in Provence styles, country and loft. Here there are natural beam overlaps, not their imitation, which can be successfully used at the moment when finishing the house of the bar is carried out with their own hands. If these stylistic options are not suitable for you, and you want to hide the overlap supports, and the house did not give the final shrinkage, it is better to give preference to stretch or drywall design, which do not interfere with the shrinkage process and are not deformed during this period.
In the bathroom or in the kitchen, air humidity is improved, and wood overlapping needs additional protection. The film suspended ceilings from PVC can cope with this task.
Selection of textures and colors is determined by the overall style of design of this room. The choice of films for the ceilings is huge and allows you to harmoniously enter them in almost any interior.
Video "Appearance"
In the video you will see what the inner finish looks like.