Sakura is a beautiful and very gentle tree that has become famous for the whole world with its wonderful bloom. The symbol of Japan found its place not only in paintings and poetry, but also in the houses of lovers of style and comfort. How to Estim Beautiful Home Decoration? We offer you a master class "Sakura from beads with your own hands."
Weep a miracle tree
To make a tree of Sakura from beads, we will need:
- beads;
It is best to use beads of pink shades to look more believable. You can also use white, soft blue or light green colors to refresh the view of Sakura.
- Thin wire with a thickness of up to 0.3 mm, this wire is useful for the manufacture of twigs;
- thick wire;
- nippers or sharp scissors, needed to cut the wire;
- line;
- Bowl for beads;
- Plock (preferably on a tissue basis).
For a pot:
- Any deep and stable sudine (jar, box);
- gypsum;
- paint.
The scheme for weaving will not need, everything is easy and simple. Trust MK - how to make Sakura will not be a problem.
Pay attention to the lighting. Try to engage in creating a tree or in daylight, or with a bright desktop lamp. Prepare a photo and video tutorials in advance on this topic in order not to waste time.
Getting to work
In the container for beads should pushes beads one sachet of all shades of pink and green, which you have. Next, you need to take the wires of the wire and measure the right piece by the knob, then cut it off. In order for Sakura to be height about 17-20 centimeters, approximately 70-80 wires of the wire should be measured.
On the left side, the line must be measured 10 centimeters of the wire and bend the edge at an angle of 90 degrees, without cutting off the edge. Now from the other edge we ride five wire beads. Colors should be taken ahead. Next will begin the most interesting and complex moment of the master class.
Article on the topic: Pattern scheme "Letter" with descriptions with description and video
From the bend, which was done on the left part of the wire, measure one and a half centimeters and form a ring out of five beads. At the edges of the ring, tighten the wire well, and continue to shock the wire for a length of 1 centimeter.
After that, 5 more beads should be riveted on wire. Again to measure 1.5 centimeters and form a ring from the bearer, which also securely secure the welding wire. Continue this technique while the wire will not be made 11 rings. This will be the colors of our tree.
Then bend the wire in half so that the sixth ring is in the middle, and wind the two edges of the wire, without leaving the gaps. The first twig of our sakura is ready. The more the twigs, the more magnificent and more beautiful will be Sakura from beads.
When all twigs are ready, they should be connected to one tree. Do not lengthen it up, as the real tree is low in size. To connect the branches together, you should take two twigs and coping them, binding among themselves.
You need to braid not until the top, one of these two twigs must be placed slightly higher than the other.
Next to these two twigs, fasten the remaining blanks. When all branches are fastened with each other, you can proceed to the final stage. It is necessary to give the tree shape. It is for this that the thick wire is useful. Confolding the wire on the leg of the tree, to let it between the branches, tilting them at the same time in different directions.
Then you should hide the wire and make Sakura Status more natural. This requires a plaster on a tissue basis, preferably white. Thick layer, but tight, wrap the pillar and branches so that the tree looks like a present.
Now we are preparing a pot for wood. It is necessary to take the container in which the tree will stand and fill it with plaster. In order to make it right, you can see the training photos.
Article on the topic: Maracas Papier Masha do it yourself
After that, in the not yet frozen plaster, put the woven tree not until the end and keep exactly 5 minutes until this material starts to stick. Leave the craft for half an hour.
It is necessary to prepare a brush and brown thick paint. Water-based paints are not suitable, as they will flow during processing. Slow movements to apply paint on the plaster. If the color does not immediately become saturated and smooth, repeat the action several times. Next, leave the product to dry for a long time (about a day).
Sakura from Bead is ready, it remains only to take a completely dried flower and straighten the flowers! In order for the caretaker to become even more interesting, you can decorate the pot with paints, stones or beads.
