Bracelets have always differed from other decorations with their originality and special charm. Friendship bracelets, with name, Fuenches - each of them is a very valuable and expensive gift, because made personally with love for the recipient. How to make a bead bracelet for beginners with the name? You will learn about it very soon.
Name bracelet.
This bracelet woves in the technique of weaving beads.
For this type of weaving, in addition to beads, threads, needles, the machine will also be required. If it is not, you can adjust the box from under tea or a regular container.
This example is made on a box of tea.
What will be required for manufacture:
- beads;
- threads (you can take advantage of Moulin);
- needle;
- Machine for weaving.
First you need to pull the base threads. In the row there will be 7 biserin, the filaments of the foundation will need 1 more, that is, 8. Then, without cutting Moulin, make eight turns around the box. From the bottom so that the threads do not move, fasten with scotch.
Next, you must take the usual sewing thread into the tone of the threads and put it in the needle. It will be a working thread. After that, tie a thread. The tail of the sewing thread, so as not to be confused, fasten with scotch.
Pick up the needle of 7 biserin. Then turn the thread with a stripped beads under the basis. In the index finger try to extend the beads between the bases of the base. The first row is complicated, so it will have to work well.
Turn the needle over the feed threads.
Before pulling out the working thread, pay attention, whether all the filaments of the basics under the needle.
The very first and complex row is ready!
Again you need to ride seven beads and skip the thread with beads under the beads of the base. With the help of the index finger, push the beads between the threads and turn the needle, so to the desired length of the bracelet. Upon completion of work, rejuvenate the scotch, cut the filaments of the base in the middle of the box below. Tails braking, tie nodes.
Article on the topic: Cross Embroidery Scheme: "Panda" free download
Bracelet with name is ready!
Simple bracelet for beginners
This lightweight bracelet is made from a fishing line and beads, as well as needles and threads.
The scheme looks like this:
First you need to dial four beads, close them in the ring, entering the needle in the first, second and third. Thus formed a cross. Then you need to ride three more, enter the needle into the fourth previous link. So it turns out the next cross.
Display the needle to the top of the link. Weave until the future product get the desired size.
It turns out the chain of crosses, but it looks not quite smooth. To fix it, you need to return the chain to the beginning.
Then enter the needle into the lateral side bead.
Dial three beads, enter the needle into the side first link, forming the shape of the cross. The needle to take into the upper bisper of the last cross. Next, dial two, enter into the side second link and the upper previous, as in the photo.
To bring the needle through the side and upper only formed cross, the side third link. Continue to spill to the desired length. Return on the second row to its beginning to align weaving. Fasten the fastener.
Openwork bracelet from beads and beads
What is needed to make an openwork bracelet with your own hands?
- lock;
- beads similar to pearls;
- beads;
- Books;
- needle;
- Capron thread.
First you need to secure the lock by the sewing knot in the loop. Hang two big as the basis. Dial 6 beads, biconus and again 6 beads. To go with a needle in two large, tighten.
Make the same thing on the other side. Score one big, six small, biconus and six more small. To spend the needle through the previous and newly strung big.
The same do on the other side. Continue to spare up to the desired size, at the end, fasten the second part of the lock.
Article on the topic: Friendship bracelet with your own hands from elastic and thread Moulin with video
