It is always nice from the barn things to do something useful, and if the craft is also obtained and beautiful - the pleasure is double. One example is crafts from tires. Of these, decorations for a cottage or garden plot are made, different vases and flowers, build children's attractions and even make dacha furniture - tables and chairs.
Floweries from Tires
Let's start with the most, probably simple flower beds and flower beds. Do you think make a multi-tiered flower leaf? Maybe but not from tires. You take a few pieces of different sizes, paint in bright colors and fold the slide - one to another. So that your slide does not fall apart, fasten the tires from the inside with the help of a screwdriver and self-tapping screws. Two on one connection will be enough. Inside fall asleep soil, plant plants. So that the soil does not fall down, it is possible to store the tire inside a piece of geotextile. It will remove excess water, but will not give earth. Beautiful tier flower garden ready.
Tire liner
If you like the flower beds, you can do those. For example, folding the flower club in the form of a chamomile. First lay out and fasten the tires in the lower tier. Fill the ground middle of tires, as well as free space inside the circle. There for a better drainage you can lay a broken brick or other construction garbage, sprinkle the earth a little bit and tamper. On the prepared surface, retreating from the edge more than half the tire diameter, lay the second tier. They are also bonded among themselves, the middle falls asleep with soil, and the core is climbing from above. On the top of the tip, you can plant tall flowers, and on the lower tiers - curb or lowered.
Another way to make a tires tires
Another option of flower beds in the form of a chamomile is in one tier. For its execution, tires will have to cut.
Flowerbed chamomile from tires
How to cut tires
In general, manufacturing crafts from tires, they often need to cut. It's not easy. It is less easily easily cut off the side surface from the tread. People with severe hands and good knives do it by hand. Good, by the way, training for the brushes and the entire shoulder belt. If you can cut a knife, lubricate the blade with solidol: the rubber is constantly "jars" the metal, and the blade covered well slides.
Also cut off the sidewall with an electric bolt or a grinder. Cut the grinder relatively quickly, but the stench is worth the wild. Because the grinder, even if it is, they only do the first to feed, so that you can enter the pylon of the electric bike. Further work this tool. For cutting rubber take the blade with a reverse toe of good steel.
From tires with cropped edges, you can make a high bed for strawberry
If you have to cut the protector, do it with a jigsaw or the more knife, it is useless. In any case, an ordinary knife. Even iron cord can cut the blades from special steel, but it is unlikely that someone wants to urge such an old tire tool. Therefore, they work most often with a grinder. In order not to have trouble, the protector is fixed: always think about security. If the sidewalls are already cut off, the tape tape is rather elastic, it can be squeezed. Cut it will not be solved.
Article on the topic: Installation of electric (cable) warm floor with their own hands
On how to make a small reservoir from the tire, read here.
Wheel Vase: Soak tires
If there is a tire with an old wheeled disk, you can make a flower vase from it on the leg.
Color Vases from Old Auto Wheel
For this, one sidewall is cut along the tread. And turn out. This is not an easy thing: considerable physical strength and perseverance required. Rubber elastic and expand it from the first time it does not work. If at all at all, on the outside they make notches across the tread. They must be quite deep, but not through. It will also help if there is a depth of at least 5-7 on the edge of the cut. They will look like a fringe on the tire.
Why turn? The inner surface is smoother, and the form may turn out more interesting, especially if the edge is not linear, but toothed. It turns out an elegantly bent decoration.
Another veson of a tire
In detail how to turn the bus, look in the video.
Similarly, you can turn the bus without a wheelbar. The sequence of action is the same. First cut off one of the sidewalls - directly or zigzag. To "petals" were even, they should be placed. Convenient to do it with chalk. By the mark then cut the electric bike or knife (if synthetic cord).
The process of turning the old tire in the flower garden
Soak like this: they come to the inner part of the tire, they are taken by the edges of the edge and pull up and on themselves. It is important to achieve the first result: when at least some part arched. If the tire looks like in the photo below, it is already success. It is developed, consistently turning the edge and standing on the part twisted already - so that it does not turn back.
Turn the tire without a wheeler disk
Once again, look at the process in the video. This time turn the tire without a wheel (cut by way with a knife).
Even by itself, such a tire inside out is not bad. If you paint it - it becomes even better. If you wish, they can be combined - different colors, dimensions, differently installed: on the tire or on the legs.
Installation options
Always beautifully high flower bed. Especially with ampel plants. It can also be made of tires, and several possibilities. In the photo below, two ways to fix cropped tires at different levels. The first is to use hemp for this, to which nails or self-stakes to mount vases. The second is to use fittings - three four rods to wear rubber. Having exhibit at the desired level of the tier, it needs to be fixed, on metal it can be done only with the help of clamps.
Multi-tiered tires
It is not always possible to put a rone to the ground: some sites are so mastered as one square meter is distinguished problematic. In this case, the people came up with various suspended vases and, too, from old tires. Only a small part remains from the entire tire, so you have to cut a lot ... Best patience. For example, you can make suspended porridge in the form of a dolphin, parrot, rooster and other fish birds. Several ideas see not a photo.
Article on the topic: Marriage of plastic windows
Kashpo from tires - parrot, rooster and dolphin
All these crafts from tires. Only a small part of them - the heads are made of dense foam. Cutting and polling the part of the desired shape, it is fixed with the help of self-tapping screws, lubricated with glue (this is a secret, remember), and after - paint. How to make a parrot from the tire look in the video.
From the cut tire you can make a track for a garden that will serve for many years.
Crafts from tires for garden
The fantasy of people is limitless and they make amazing decorations from old car tires. The most common crafts are figures of birds and animals. And the most beloved, perhaps the character - swan. It turns out graceful and similar, especially if you know some tricks.
Swans made of tires
The main task in the manufacture of gardens from tires is the correct markup. For example, those swans that in the photo at the top, the head is not entirely cut out. It can be done more believable by making a sharp beak. An example of cutting tires - in the photo below. Cutting such lines is definitely harder, but the result is impressive.
How to carve out the swan from the old tire
According to the printed lines, the tire is cut, then the wings are turned out. At the same time, the neck bends quite cool. So that this bend can be changed, it can be screwed up with a metal plate with screws. When everything covers paint, nothing will be seen, and the head slope can be changed, which is also quite relevant. Often Swan "Sitting" into the nest from another tire. Then it must be attached by self-drawing: the figure should well hold and be stable.
There is another improvement - wings. They can be left as it is, you can cut from rubber "feathers", and you can make feathers from white plastic bottles (from one liter bottle it turns out 6 feathers), attach them to the grid. It turns out then such a bird ...
The body of these decorative swans is made of tires, and all parts of the girlfriend
How to make a swan from a tire - starting from cutting and up to the final finish - look in the video.
For similar technology, you can make numerous figures for decorating a plot or garden. It is easiest to do a frog: the body is one or two colored tires, the paws can be made of trimming of the sides or what other materials, eyes - who will come up with - someone even did from plastic cups or small tires, apparently, from a pram .
Frog from tires
Make more bears, flamingos, dragons, crocodiles, giraffes, zebras, donkeys ... It is easier to say who do not. Some crafts from tires look in the photo gallery.
Bear from old tires
Bear from the tires do it yourself very simple
Dick palm trees are green even in winter
Donkey from halves of tires - Dores from wood
Stork from tire - occurs infrequently ...
Snake-Gorynych's figure from tires on a booth ... symbolic))
Graceful pink flamingos in the company CC)))
Dragon from tires - the defector will like
Zebra and Giraffe are made by similar principle - difference in the length of the neck and color
Article on the topic: How to make a computer desk corner with your own hands
You can make from tire rides for the playground. Especially a lot of fascinating crafts turns out for boys: self-propelled gun, gun, cars, tractors ... they will definitely like it.
Children's racing car from tires is suitable for kindergarten
The tractor will cause no less enthusiasm
Multi-Sport Car
Motorcycle with a stroller of old tires ...
The eternal desire of boys to play the war in the war will increase if there is a gun on the site ... .. as a real
Such a self-propelled gun will attract, perhaps, not only kids
Garden and country tire furniture
It is difficult to believe, but even furniture are made from the tires: the docks, tables, chairs. All this can be made from the old tire. The easiest way to do the deputies: to put a slightly identical diameter (or not) tires one to another, copold from the inside with screws. Top filled with dense furniture foam, sew and put on a case. If you wish, you can attach legs: at least to fasten the furniture wheels: and move it easier and the floor does not pack, the second output is to secure the bottom of the felt (on the stapler brackets).
The following are step-by-step photos, which capture the main stages of creating a table or a panphonic from a tire. We will need two more circles from plywood or fiberboard of a suitable diameter, a hemp rope is used for decoration. From the girlfriend, you need glue and adhesive lint, as well as varnish and brush to apply it. To connect circles with a tire, you will need a screwdriver and self-tapping screws - pieces of 8-10 and each side.
Puff or table from the old tire
Next, we take the adhesive gun and heating the glue, we apply on the sidewall. If there is no such luxury in the farm, take the glue, which is in a larger tube, such as "liquid nails". It is easier for them with an assembly gun. Apply a strip on the sidewall, stick the hemp rope. So - to the very top.
Purify the sides of the hemp rope
By the same technology, decorate the lid of the table (Purph). You need to start styling from the middle: We apply glue, put the rope.
Decorating the lid of the table
End of work - varnish. We do not do well, so impregnating. That's what should happen as a result. If you did a table, you can put the glass - the rope, even covered with varnish, is not the best coating for the table, although beautiful ...
Such a bafficle table turned out and the old tire and hemp rope
Diversity can be achieved at the expense of the cover. It can be sewed from a closed dense material.
Cute Puff ...
You can connect - a large binding looks interesting.
Knitted Case of Large Mark - It looks interesting
If you want to sew and knit, you do not want to use, you can use old knitted things cut on strips. They are cut on long stripes with a thickness of 3-5 cm, fed into the balls then wrap the emblem. It turns out interesting, especially if several colors are combined.
Cut the old knitted things on the stripes, wind in the tangles, turn the top the end. The result is in front of you
The same technique in different colors
If you need a paddle a higher, twist two tires together with self-draws, and in this form work with them further.
How to make a high baff
This is the result of labor
For another option, look in the video