Overlapping the opening of the entrance with a metal door design, each to strive, in the maximum, to protect the dwelling, relatives and self personally. But only a lock in the door remains the main obstacle to hacking, which can be revealed by any permissible way.
Improving reliability: ability to small details
In fact, all the door structures, not only the input group, require a special degree of protection and lining for interior doors are not rarely used, both in everyday life and buildings of a different type of use. Entrance blocks, as well as interroom, be created from a strong wood array and even from metal, cannot fully carry the protective functionality if the locking mechanisms used are not securely protected. Even the installation of the armored door will not solve the problem of calm sleep.
Almost all locks that are installed on the design of opening of openings, especially the input group, are equipped with decorative or protective armored panellas. The whole problem is that with the defective protection of the castle core, the hacker has a chance to choose a combination of unauthorized opening of the lock or opening the core drilling method, increase largely. The most effective and correct way to improve the safety of your own door comes down to order special cornmarks for locks. The cornmarklacks are made under the order and even available in retail to each consumer, both on the cylinder lock and on the Suwald.
With lining of decorative purposes in general, everything is clear, but the protectors and special bron alphabets are mounted in defensive purposes on the entire spectrum of the entrance door doors. Typical protection is necessary for basic and additional locking devices in order to:
- Strengthening the secrecy of locks;
- Increasing the inaccessibility of steel designs of doors;
- The protection of the lock of the locking mechanism from knocking out, drilling, attempts to break the castle by the method of bumping, that is, using a special method of kneading.
Pads for cylinders
To improve the quality of reliability of lockable devices, special armored lining for castle systems endowed with cylinders of the European profile are used. In essence, the pad on the cylinder constipation is an element created from this armor, which does not allow and not representing a hacker, not a single chance to get to the larch, since the additional part hides the cylinder itself.Article on the topic: Wallpapers Hall Combined 2019 Photo Design: For an apartment, how to combine beautifully, choose options, combination, different interior, video
In the cylinder lock case, the core (internal mechanism) is to rotate, provided that a suitable key is inserted into it. The cornmarklacks are endowed with the ability to overlap access, any nature to the locking core, thereby ensuring the maximum level of protection level of the locking device. The main characteristics of protective linings are permissible to include the following indicators:
- The use of particularly strong method of processing surfaces of products;
- Non-standard and completely new technical solution regarding the consolidation to the door design of the canvas.
The protective part on the cylinder constipation is nothing but a metal product created from a special alloy of metals. When using the element under consideration in order to protect the lock, the cylinder constipation is able to withstand:
- Mechanical effects of various kinds - knocking, overlaid cylinder;
- Damage or destruction of rather important castle segments - Pins.
The bron alphabets on the locks have the form of two metal plates, tightened with each other when mounting through the door cloth and directly the key of the key device, when using two screws. It is permissible to allocate two main types:
- Armored overlay on the cylinder block of an overhead valve type.
Overhead protective plates in their own composition have two main details. One of the details is mounted on the outer sheet of the door design of the metal of the input group. Answered, that is, the second part of the part is installed on the internal finishing side of the door flap panel. Fastening the invoice is made when using a pair of tie screws inserted into the door from the inside. When tagging, the screws pass a sheet of metal (internal), the holes of the casing itself, the outer metal sheet, entering directly in the cornmarklack. Climbing to the outer steel sheet is quite densely detail, the screws, thus make the design of the locking mechanism in fact cast, reunifying the bron alphabet, the door canvas and the keyboard mechanism together.
It is worth noting that the type of installation is the part, it is permissible to knock off the lock from the sash if you wish to hack the lock. Although this option of autopsy is able to significantly slow down the cracking process. At the same time, among the overhead products there are variants of samples, thoroughly devoid of such a lack.
- Mortise overhead detail on the castle.
Article on the topic: Fences for cottages of wood: types of structures
The bronmark of the mortise type is crashed into the outer metal sheet of the inlet door sash, as well as in the so-called, mounting pocket of the shut-off system, mounted directly on the cylinder. The fixation of the part is made by means of a screed using two tighter screws that are inserted to fastening from the inside of the door canvase. Screen screws, exhibiting, pass through the inner metal sheet of the door flap, the hole of the keytone and the outer steel sheet, entering the armored lining. Chatting of the two plates of the product is produced by dense pressing of the outer part to the steel sheet of the web, which forms, in this way, a litter lock design with a door, overlay and cylinder lock.
This type of installation plate is able to withstand any mechanical impacts, including drillings.
- Semi-dryed lining.
The above-mentioned type of plate is more difficult to install. For example, a bronmark of a semiconductor type can have two parts in its configuration, which provide the maximum indicator of protection against mechanical damage to the lock, as well as have plates of the lining that impede such a hacking method like removal.
Regarding the degree of reliability of the same type of armored protective linings for locks, then, according to experts, it is the part of a mortise type exceeds the overhead products in terms of reliability. This fact is explained by the fact that the mortise plates are much more difficult, let's say, to bring down, since their method of consolidation is more reliable.
Lining, despite their form and installation method, do not allow capture the cylinder with special devices designed for hacking (due to the rotating insertion), as well as drill or knock it out because of the armored body of the plates created, often from carbon steel.
Protection for Suwald
It is important to know that it is permissible to equip not only locks with replaceable cylinders, but also the Suwald type of locking systems. After all, rather competent hackers know all weak points in the castles, and if a typical weak point simply drill, the protective functions of the constipation will be collapsed at one moment. So the drilled lock will be allowed to operate with any approximately suitable key.
Article on the topic: Interior of a three-room apartment of 72 square meters. m.
One of the most important and thorough point of the Suwald mechanism of the castle, which is responsible for its serviceable activity, is located on the shank of the grain (internal part) at the fastener of the rack. The standby stand is endowed with the ability to fix the Suwalds. When the rack is destroyed, the Suwald shut-off mechanism is simply scattered and is no longer able to hold in the fixed state of the CAC.
Due to finding the most susceptible place of the place inside the castle case, the ill-wishers will be forced to get to the rack from the outside of the door canvase using the drill. With the help of drill, all several obstacles are overcome to it: the door sash, the armored plate is either a pad, and the housing itself of the locking mechanism. Armored plates of lining are mounted on the housing itself of the locking device at the point of the reinforcement of the shank rack. Platins in this embodiment serve as the protection of the internal mechanical device of the lock from the unauthorized destructive effects of the drill.
With the special needs of the protection of the Suwald type lock, the armoflastine is often used, which closes the entire body mechanism. Typical plates are mostly manufactured from a manganese-containing steel alloy. This type of steel, specialists consider the most durable and stable to damage to a different nature. It is from manganese-containing steel that the inserts are created for body armor. In addition, this type of alloy is used when the armored equipment is trimmed.
(Your voice will be the first)
Loading…