Today, the modern bathroom is hard to imagine without heated towel rails. Without them, no bathroom interior is required. These useful fixtures are designed for drying towels and other small postgraded linen. In addition, they create a good microclimate in the bathroom, as they help get rid of frequent humidity and dampness here.
Installation circuit towel rail.
In order for the heated towel rail to be not only a decorative part of the interior, it needs to be correctly and correctly connected. Properly made installation of any equipment provides its maximum functional use.
Anyone, at least a little familiar with plumbing work be able to connect a heated towel rail. To install it, you do not need any special skills and is needed the easiest hand tool. If you wish to mount in your bathroom with your own hands, here you will find useful tips and recommendations.
There are two types of data of heating units: snake and ladder. In this article we will talk about how to properly connect the ladder towel rail. Connecting this type has several variations.
Methods of connection
The heated towel rail can work both from the heating system and from the hot water supply system.Connection diagram of the valve of the towel rail.
Connect the lasy heated towel rail can be three ways: sequential and two variations in parallel. They differ in the fact that in one embodiment there is bypass, that is, a pipe that creates a short way of water flow. Its presence can be shut off the heated towel rail from the system without the need to overlap the entire system. The second connection option does not imply the presence of bypass. Water, entering the top corner, goes through the entire ladder in the opposite edge of the diagonal.
There are various connectivity options and to the heating system. It may be diagonal, direct and lower connection to the heating system. But to produce high-quality installation, appropriate preparation is necessary. Any installer will need certain tools and materials.
Article on the topic: Curtains Threads in the kitchen: Transform interior
List of tools and materials
Connection node towel rail.
Let's start with the materials. To connect the ladder towel dryer, you will need the unit itself. Today there is a huge selection of this product, but do not hurry with the purchase. The fact is that imported heated towel rails are not adapted to the installation in the plumbing system. That is why it is better to give preference to domestic production, since they fully comply with all the requirements of GOST. If you mount a towel rail in a country house where the water and heat supply themselves were performed, in which case foreign heated towel rails can be used.
To correctly make installation, you will also need pipes and valves. Pipes may be stainless or plastic. If in its system to which you connect the heated towel rail, you will pride the bypass or the heated towel rail will be connected in parallel, you can mount a couple of valves, with which, if necessary, easily disconnect the towel rail, which will not affect the operation of the entire system. Fittings and sleeves can come from materials.
The tool that is necessary for the installation of the ladder towel rail is the usual plumbing plumbing tool, wrench keys of various sizes. For installation, the Lestenka can not do without a special tool, such as welding for metal pipes or soldering iron for plastic, perforator, and also a burgrage with a cutting circle. When all this tool is ready, you can move directly to the installation. But before mounting a new heated towel, you will probably have to dismantle the old one.
Dismantling of the old and connection of the new heated towel rail
In the apartments of the Soviet layout, heated towel rails are installed in the form of a snake. To dismantle them, you will need to take advantage of the grinder. But first, it is necessary to turn off the water in advance and drag it with the riser. To produce this operation, residents of an apartment building will have to contact the JCC or another organization responsible for the flow of water. After dismantling the old heated towel rail, you can move to installing a new one.Article on the topic: Cumulative type water heater with your own hands
Installation is best started with bypass mounting. Bypass is a coaching path that will allow in the future to replace, cleaning and repairing a heated towel rail without disconnecting the overall water supply. For the installation of bypass, there will be three valves: two for a heated towel rail, one for the bypass itself. The first two valves are installed in places of attachment of the towel rail. A third valve blocks the movement of water in the bypass itself.
The next stage will be the installation of the heated towel rail-ladder to the wall. To do this, use the perforator to consolidate the special brackets to which it will be attached.
Then there is a heated towel rail to connect with valves. Attach the product to the bypass you can either with the help of sleeves or special fittings. Installation of the ladder towel rail produced. To fill the heated towel rail, you need to open all the cranes. But in order to avoid the hydraulic man, it should be done alternately.
Useful recommendations on installation
- It is not worth using details from different materials in one system. For example, using different metals, it is possible to cause electrolytic corrosion, which will lead to undesirable destruction. In this case, the system of plastic pipes is allowed to connect pipes from any materials.
- It is worth considering that a heated towel rail, which is connected to heating, is intended for work solely during the cold season. To use it all year round, it must be connected to the hot water supply system.
- The heated towel rail can be mounted to the upper and lower pipes. But it is worth considering that if you connect it to the bottom nozzles, its power will decrease by 10%.
- If you used to have a snake heated towel rail, and you want to change it on the ladder, the device with a side connection is best suited.
- If the diameter of the pipes to which the towel rail is mounted, does not correspond to the diameter of the nozzles, you will need to use adapters. But the diameter of the adapter in no case should be smaller than the diameter of the pipes. Otherwise, the smaller diameter of the adapter will create excessive pressure in the heated towel rail, which, in turn, can lead to an accident.
Article on the topic: How to organize a wardrobe inside
It is worth considering that the location of the water heated towel rail must always be free access. After performing all installation work, do not forget to check the tightness of all connections.