When making a knitted product with cuffs or with a tensile bottom plank, the question arises how to dial a loop to unscrewing the gum, in order to keep its main purpose - good springness. To do this, pay attention to the correct start of working on rubber band. First, it is necessary to carry out an elastic set of loops, after which knitting moves in the right direction.
Knitting on the needles
Italian method is considered to be the most successful way to set a loop with good stretchability. It is applicable both for standard work with the knitting, and when unscrewing in a circle.
To carry out an elastic edge for gum 1 × 1, you need to stick to a certain sequence of actions. It is desirable to use the auxiliary thread and additional needles.
In the work participate:
- Main yarn;
- Contrast thread;
- 2 pairs of spokes (one pair should be half the size less than another).
Knitting begins with smaller spokes. The first loop is recruited by a classic method of mating.
After that, the main thread is wrapped around the index finger, and a loop of an additional (contrasting) thread is fixed on the thumb. Both threads adhere to free fingers.
The knitting needles is entered under the auxiliary thread and is captured through it, and then the main thread is displayed.
Next again the basic thread is thrown.
And again the needker across the extra thread, after which the loop is pulled out of the main thread. And once again the needker is introduced under the base thread.
Already scored four loops.
The work continues in the same sequence until the desired number of loops are scored.
The set is true if all loops are located on the knitter, and the thread is contrasting in the lower edge.
Auxiliary thread remains on the needle during the first line inspection. In this case, the front loops are in front of a contrasting thread. Purchased hinges passing for extra thread. They are removed.
Article on the topic: How to decorate mittens - Embroidery with beads
In the subsequent two rows, facial loops are pronounced facial, and the involves are removed.
Further work is carried out by the needles of larger size. The technique of knitting gum 1 × 1 is performed: the facial loops are proclaimed by the facial, and the invalid - involnery. At this stage, the additional thread loses its value and removes from the product. Scored by the Italian loop method subsequently can be used for 2 × 2 gum.
The only thing you need to take into account when set is the number of loops. It must be a multiple of four. After the ranks of the rows with small knitting needles and the transition to the main pair of spokes, it is proclaimed: the edge, front loop, the wrong is removed on the second knitting needle, the facial, invalid from the neighboring needles, and again. The row ends with the edge loop.
This method occurs in the pairwise construction of the loops into the gum 2 × 2. Then fit familiar to this type of gum drawing. The method of set of loops in Italian is applicable for circular knitting. It should only take into account that after a set of loops, knitting turns.
Hook to help
The usual air chain of loops when knitting on a hook is already pretty stretched in itself. But for some products such elasticity is missing. Then it is desirable to apply a slightly other technique of mating crochet, in order to elasticity during operation, things did not blame.
Initially, a standard pair of air loops is recruited.
The hook draws the first loop of the row and pulls the thread.
With the help of additional pickup, the threads are first connected, and then the second loop.
The hook is introduced into the adjacent loop, the thread is pulled out, then clings again and is written in two stages, connecting the loop pairwise.
The sequence of actions forms as a result of the stretched edge from the connecting columns.
You can apply a slightly different approach when creating an elastic edge of the loops. There are already participating columns without Nakid.
As in the first case, the work begins with a pair of air loops.
Article on the topic: How to make animals from plasticine at home with photos and video
The hook is entered into the first formed loop and pulls the thread out.
The next loop is thrown.
The loops are connected in one. The next thread is cling to the nearest loop, and then the single loop is again pronounced.
It is possible to carry out the extreme line of the product through the elastic set of columns with Nakud.
Four air loops are formed.
The hook is wrapped in a thread and introduced into the first loop of the chain.
The picked thread is pronounced separately with one loop.
The thread is once again shaped and a connection of loops is carried out in two stages. There should be one loop on the hook.
Caida is made and the hook slipks for the left edge of the next loop.
This loop is written separately.
And from the hinge remaining on the hook, a column with an attachment is created.
The chain continues in the same way. The choice of a set of hooks on the hook depends on which the product is provided, because the thickness of the elastic chains varies at the output.
If you need to separate the openwork thing, the most acceptable set of columns without Nakida. And for the caps with textured viscous, the initial row of columns with Nakud is quite suitable.
Video on the topic
Options of an elastic set of loops are shown in the video, after familiarization with which it will be easier to choose the most successful loop chain for a particular product.