A ba wani abin ban sha'awa ba yana tunanin yadda ake dinka jaket tare da hannayensa, amma kowannensu ya tsaya kafin ya wahalar yin tsarin daidai. A zahiri, a cikin Intanet na duniya na duniya, nemo alamu na jaket na mata kyauta ne mai sauƙi, duk da haka, an tsara su ne don adadi na yau da kullun. Sabili da haka, muna son a ba ku ɗan aji, wanda zai gaya muku daki-daki yadda za a gina tsarin jaket ɗin mace, yana mai da hankali kan adadi.
A zahiri, jaket dole ne ya zama halayen m a kowane sutura. Godiya ga wannan abin da zaku iya hada hotuna daban-daban da sabon abu, juya daga mata ta kasuwanci cikin zaki mai zaman kansu.
Koyaya, don jaket ɗin yana da kyau a gare ku, ya zama dole don yin la'akari da yadda namu yake da fasali na adadi. Ya kamata a lura cewa idan kuna da ɗakunan kugu, zaku iya samun ɗan gajeren skir a hade tare da jaket mai tsawo. Ga masu nono nono, ya kamata ku zaɓi samfuran jaket na jaket waɗanda ke da lapels da aljihu, kuma suna da yanke mai kusa.
Don haka, don tsarin jaket ya kamata ya sami wasu ma'aje] wasu ma'aje): layin ruwan wukakuka (ll), layin ƙirdi a baya (LH), nisa da baya (SC), da gangara ta baya da kafada daga gefen baya (NPS), tsayi na kirji (rana), tsinkaye), tsinkaye), da gangara daga kafada daga gaba Daga cikin samfurin (NPP), tsawon zuwa (DB), fadin guda ɗaya na nono (Shg1), mafita na ƙiren nono (SCV), nisa tsakanin NIPLES (RC ), semi-rare na wuya (ss), kumburin nono na farko (CG1), kumburin nono na biyu (CG2), karfin gwiwa (SAT) Kuma a ƙarshe tsawon kafada (dpl).
Babban girman don tsarin wannan samfurin shine layin da ke wucewa tare da kirji. Kada ka manta da yin la'akari da cewa a kan tsarin wajibi ne don samar da 'yancin na fite, wanda ya dogara da tsarin jaket ɗin da aka zaɓa.
A wannan yanayin, an yanke shawarar yin amfani da 'yancin dasa shuki a kan layin kirji - 6.5 cm, a layin kugu - 7 cm kuma a layin cinya - 3.5 cm.
Ya kamata kuma ƙayyade 'yancin shuka don layin nono, wanda zai zama daidai da 6.5 cm.
Ya kamata a kara santimita zuwa tsawon tsawon, kamar yadda jakkofin za su sami tsarin rufin da jin daɗi.
Mataki na kan batun: Asserami malam buɗe ido: Tsarin tsari mai sauƙi na takardar kudi da kayayyaki tare da hotuna da bidiyo
Gini don fara bayan baya.
A cikin kusurwar dama ta sama, zamu jinkirta nuna p da kuma gina madaidaiciya kusurwa daga gare ta, don haka: layin рл = рл + + Co - Co - Line Tsawon kugu.
Don zana ɓangaren TB, ya kamata ku yi amfani da ma'aunin DTT da CO, sannan ku raba su cikin rabi.
Abin da zai kasance tsawon jake din ya dogara da zaɓaɓɓen salon da siffar ku. Idan muka yi la'akari da siffofin jaket na jaket, to, tsawonsa yakan kai kwatangwalo ko santimita goma a ƙasa da su (BN = 10 cm).
Daga wannan don haka ne aka samu maki a layin tsaye, ya kamata a jinkirta layin kwance a gefen hagu. Sannan layin ya kamata a gina layi a hannu a wace gefen gefen zai tafi. Latterarshen ƙarshen ya dogara da nau'in adadi. Idan kayi la'akari da siffofin gargajiya, wannan adadi yana buƙatar hutu akan matsakaicin kugu game da santimita biyu, 2 cm. Kama da BB1 = NN1 = cm.
Yankin pr1 daidai yake da kashi na uku na SS + Co, da RR2 = 3 cm. Lura cewa P2 an zana shi a kusurwar 90 digiri.
A wannan matakin, haɗa layin maki P2, l, T1, B1 da H1.
Ga sashi na ll1 Yana bin sc + Co, kuma a tsaye daga batun L1 zai ba da batun G2.
Yanke G2G3 shine nisa na makamai, wanda ake lissafta ta hanyar dabara ta fifa na SPRACT + co.
An samo maki o bayan rarraba kashi a sakamakon rabin.
Daga wannan gaba, ƙasa don ƙetare layin ƙasa zuwa ƙasa na ƙananan ɓoye na ƙasa da samun aya t2 da B2.
Don samun aikin kayan aikin ya biyo bayan DB-3 cm.
Ya kamata a lura da darajar ta hanyar tsaye daga aya T2, don haka ya zama ɓangaren oz.
Muna gina sashin kafada don jaket.
Daga P1 kana buƙatar matsar da alamar a kan Arc daidai yake da PDL + 0.5 cm + 2 cm 1cm.
Hakanan daga t1 mun fassara alamar akan baka daidai yake da NPS + CO.
An samo maki p ne daga hanyar shiga cikin waɗannan arCs. Daga gare ta, ya kamata ku ciyar da layin tsaye wanda ke ɓoye a kwance a lokacin P1. Raba PP1 a cikin rabin kuma haɗa da sakamakon sakamakon da P1.
A sakamakon layin, kashi ɗaya bisa uku na DPL ya kamata a jinkirtawa, ya karɓi ma'ana wanda aka tsara a matsayin "in" a cikin sa, ya kamata a sanya santimita ɗaya. "BB1" = 1.5 cm, "B1V2" = 10 cm. Ya rage kawai don haɗa waɗannan abubuwan azaman b1 da n kowannensu na sashi.
Mataki na farko akan taken: willafa sanduna daga Willow don masu farawa: Yadda za a yi wa'azi tare da alamar Jagora da Tutorials
Gina shiryayye don jaket na mace.
Muna ci gaba da gina shiryayye na samfurinmu, falinta yana tare da layin kirji yana lissafin layin kirji da G3G4 = Shg1 CO. Daga sakamakon g4, yakamata a gudanar da layin tsaye.
G4r3 = vg + Co - muna samun tsawo na kirji. Рт4 = hadari + co - tsawon zuwa kugu.
Don izinin izinin jaket ɗin, ya kamata ku ɗauki kusan santimita ɗaya da rabi.
P3R4 = kashi ɗaya bisa uku na SS + 2 cm - girman faɗin wuyansa.
P3R5 = kashi na uku na SS + 3 cm - girman zurfin wuya.
Yanzu mun haɗa abubuwan da aka samo kuma muka raba sashin cikin rabi. Daga tsakiyar wannan layin, sa a tsaye a tsaye wasu cakuda biyu. Lain mai santsi muna haɗu da duk maki ga wuya.
Kafaffen girman P4R6 = Biyar CM, kazalika da P6P7 = daya cm.
Tsawon kafada zuwa famfo - P4R7 = 5 cm.
Idan muka yi magana game da nesa don dakatar da shading a kan kirji, to, Rc + 0.5co.
Yadda aka gina wanda aka gina.
Don gina shi, ya kamata ka haɗu da maki biyu da C. To Lissafi matakin mai shigowa, wanda yake wajibi a kirji + C Co, muna samun girman CSU.
To ya zama dole ta hanyar radius daidai da 10.5 cm daga aya C, don karanta ARC wucewa ta W.
Caseing bambanci tsakanin irin waɗannan dabi'u kamar SG1 da SG2 da rage sakamakon a cikin santimita, muna samun maganin samun kudin shiga na naman alade. Yanzu, daga aya, ya kamata ka jinkirta santimita uku a baka, sakamakon shine ma'ana U1.
Haɗa C da U1 madaidaiciya madaidaiciya, wanda ya kamata a fadada zuwa saman. A sakamakon haka, daidaita nisan cr7 da cr8.
Bayan tsallaka yankin, ya juya cewa P2, wanda shine kafada. Ba ni ne Arc ya jawo radius = DPL + 1 cm, da II - NNP + CO.
Wuraren wuraren bincike na Premium.
Mun sami a cikin hanyar shiga cikin layin kwance da madaidaiciya. Layin kwance yana fitowa daga ma'anar P2 zuwa gefen hagu, kuma a tsaye ya tashi daga ma'anar G3.
Ya kamata a raba kashi na G3a zuwa kashi uku, mafi ƙasƙanci wanda zai zama abin da ake so. Ya kamata a nuna shi ta O4 - hanyar mayaudara.
Mataki na a kan taken: alewa da sauran Sweets: Class aji tare da hotuna da bidiyo
Yanke g3o4 da wani nau'i biyu na santimita shine wurin binciken baya.
Domin makamai don kyan gani, ba shi da sauƙi a tsayar da layin kafada, amma don canza shi kaɗan. Don yin wannan, fadada tsarin baya a wurin da wurin sarrafawa. Darajar fadada shine game da santimita ɗaya. Wato, o5o6 shine santimita ɗaya.
Haɗa maki P2, O4, o, O6 da P santsi layi muna kafa madaidaiciyar ci gaban samfurin.
Zurfin ga wani siffar, wanda yake a layin kugu.
Don yin wannan, ya kamata ya zama bambanci tsakanin irin waɗannan dabi'u kamar SG1 da fasaha, yayin da ba mantawa da yin la'akari da 'yancin fret.
Muna amfani da dabara (sg1 + Co) - (St + Co).
Yakamata a la'akari da daidaito a cikin daidaitaccen daidai da irin wadannan dabi'u a matsayin T2t5 da T2T6, waɗanda suke daidai da santimita ɗaya da rabi.
Yanzu ya kamata a ɗauki dabi'u masu zuwa daga sakamakon:
Biyu santimita biyu - girman rami a tsakiyar kabu a kan sassan baya da kuma santimita daya da rabi santimita ne mai daraja, wanda yake a gefen gefen shinge.
Yanzu za mu ci gaba da kirga nisa na tsarin samfuranmu a yankin kwatangwalo, ya kamata ku yi amfani da tsarin da ke gaba:
(Sat + Co) - (Sg1 + CO) - Mun sami girman wanda girman Sketch yake buƙatar faɗaɗa kuma tsari.
Rarraba darajar da aka samu a cikin rabin, muna samun fadada seams akan bangarorin a kowane rukunin yanar gizon. A wannan yanayin, muna magana ne game da seam located tare da gefe a baya da gefen gado a kan shiryayye. Don haka, sassan B2B6 da B2B5 zai zama iri ɗaya a cikin dabi'unsu kuma kowane zai zama daidai da rabin Atteter.
Daga waɗannan abubuwan da muka samu kawai (B5 da B6) ya kamata a ƙone zuwa layin tsaye zuwa wannan ɓangaren tsarin, wanda ke ƙasa.
Na gaba, samar da gefen gefen gefen gado akan tsarin samfurin. Don yin wannan, haɗa maki O3, t5, b6 da H5 da H5, suna samun layi na gefe seam don shiryayye. Kuma yanzu mun haɗa O3, T6, B5 da H4, muna samun layin Seam na baya.
A sakamakon haka, mun juya tushen suturar jaket, wanda an riga an canza shi dangane da samfurin da kuma salon wata jaket.