Lissafin adadin filaska akan bangon

Lokacin amfani da busassun bushewa don ginin ganuwar da rufi, ƙirƙirar bangare, yana da mahimmanci don samar da ainihin lissafin duk kayan.

Hanyar jeri na bango ta filasannin filasik: A - a kan firam, B - tare da wata tafi gida.

Bayan haka, da gloll wani abu ne, sabili da haka zai fi kyau lissafin adadinta da ya dace, da kuma adadin duk abubuwan da suka dace. Amma kafin yin lissafin filasun, dole ne a yanke shawarar yadda ake dutsen.

Akwai hanyoyi guda biyu don bushewa bushewar bushe a jikin bango da rufi, wanda ya kamata a san yadda ake buƙatar amfani da kayan da za'a buƙata:

1. Shigarwa a kan firam da aka yi da bayanan bayanan ƙarfe ko sanduna na katako.
2. Shigarwa ta amfani da manne adeve na musamman.

Kayan aiki don aiki tare da filasik.

A cikin shari'ar farko, kar ku manta da yin lissafin ƙarin kayan:

• Mon Mon (CD), 27x60 mm, tsawon 3 ko 4 m;
• Karfe pp (UD), 27x27 mm, tsawon 3 ko 4 m;
• Dakatar da kai tsaye (malam buɗe ido);
• Dowels;
• Zane-zanen ƙarfe don shigar da bayanan martaba na ƙarfe;
• sukurori waɗanda ke da alaƙa da filayen hawa;
• Haɗin haɗin Giciye (Crabs). Ana amfani dashi don haɗa CD a wuraren da suka fice;
• Haɗa baka. Anyi amfani dashi a cikin yanayin lokacin da ya zama dole don haɗa bayanin martaba idan ɗakin yana da tsayi ko nisa fiye da 3 ko 4 m.

A lokacin da amfani da m hanya na haɗin Glc, bayan janar na gaba daya gama, ana iya yin lissafin amfani da manne. Kowane jaka ana nuna ta manne 1 KV. m. Ganuwa. A matsayinka na mai mulkin, jakar ɗaya ya isa ga murabba'in murabba'in 5-7. m.

Don gano kwararar jakunkuna, jimlar yanki (Op) na farfajiyar HCL za a sanya, raba 5 ko 7-3% zuwa Adadin shawarwarin masana'anta, sannan kuma Ya juya ainihin adadin manne ne wanda ke zuwa aiki.

Girman plasterboard

Classigfication na bushewa da adirshin zanen gado.

Standard Glc yana da girma na 2500x1200 mm. Yana da kauri daga 12 mm don ganuwar, don rufin - 9 mm. Dangane da haka, yankinta shine 3 m². Ya kamata a lura cewa akwai wasu GlCs:

• 3000x1200 mm;
• 2500х600 mm;
• 2000x1200 mm.

Mataki na a kan taken: balanun baranda a cikin salon fasikanci: ingantaccen bayani

Misali, lokacin da bayan duk lissafin, sai ya zama dole don raba wani sashi na 2500 mm, to, zargin 255x600 .

Domin lissafta adadin Standard GlCs, dole ne ka fara lissafta ko auna yankin ado na - ganuwar ko rufi. Sakamakon da aka samo ya kasu kashi ɗaya. Lokacin yin lissafin yankin, zai zama dole don hawa hawa wanda ke mamaye ƙofa da buɗe taga. A sakamakon lamba ya kamata a zagaye ga duka zuwa ga mafi yawa.

Akwai kuma hanya don yin lissafin adadin zanen gado bisa ga tsari na musamman:

N = (s1 / s2) x k

A ina n shafaffun zanen gado;

S1 - yankin ado, m²

S2 - murabba'in takarda guda na filasik, m²

Circuit of Inter-Axis nisan m da manyan bayanan martaba na busassun.

K - gyara mai inganci. Dakin da aka gama za a yi, yana da karami mai girma, da ƙari zai zama ƙari. Dogaro da yankin, akwai ƙoshin gyara uku:

• har zuwa 10 m², sannan k = 1.3;
• daga 10 zuwa 20 m², to k = 1.2;
• Fiye da 20 m², sannan k = 1,1.

Lissafin adadin UD. Karfe UD, ko, kamar yadda ake kira, farawa, ana amfani dashi don gyara CD zuwa bango, bene ko rufi. An raba kewaye da dakin zuwa tsawon bayanin martaba (3 ko 4 mita). Don bango, ana lissafta shi da yawa kuma ya yawaita ta 2 - saboda an haɗe shi a ƙasa da rufi. A sakamakon lamba ta zagaye har zuwa duk gefen.

Lissafta na adadin bayanan CD. Don haɗa takardar ɗaya, za a buƙaci CD na ƙarfe uku. Bayan an lasafta zanen gado na GNLY, yakamata a raba shi zuwa 3 - Sakamakon haka, za a sami amfani CD. Akwai wata hanya mai sauƙi don lissafta adadin bangon da rufi - an rarraba kewaye dakin 0.6 m - mataki tsakanin bayanan martaba. Daga sakamakon da aka samu ya kamata ya kasance tsakanin 1.

Mataki na kan batun: Hotunan don dakin yara a bango. Mafita

Abubuwa nawa kuke buƙatar rufe rufin? Ya kamata a lura cewa lokacin amfani da bushewa a cikin rufin a cikin daki, wanda ke da tsayi ko fadin fiye da 2.5 m, kuna buƙatar yin lissafin ƙarin adadin bayanan bayanan CD.

An dakatar da kai tsaye (malam buɗe ido) da dowels

Ana amfani da malam buɗe ido don ɗaure bayanan CD zuwa rufin da aka sa a cikin kashi 60-60, 8x80 ko 10x80 ko 10x80 ko 10x80. Bugu da kari, ya zama dole don yin la'akari da cewa ana amfani da haɗe-haɗe na UD irin wannan hanyar shigarwa mai sauri. Kuna buƙatar dowels uku akan pontaman.

Japping na kai

Jawabin da yake da kai don bayanan martaba

Don ƙarin bayanin martaba zuwa madaidaiciyar malam buɗe ido, sikelin No. 1 Ana amfani da 1, wanda kuke buƙatar aƙalla 2 inji mai kwakwalwa. domin kowane dakatarwar. Hakanan, ana amfani da waɗannan squing na son kai don haɗawa da gyara UD da CDs, giciye (crabs) da haɗa brackets. Yana yiwuwa ana buƙatar wannan kaset na 30-40 a kan takardar bushewa.

Don shigarwa na ma'auni ɗaya, kuna buƙatar ƙashi 50 don ƙarfe l = 25 mm. Lokacin da sayen kunnawa da dowels, ya zama dole don ɗaukar su tare, kamar yadda suke iya faɗuwa ko kuma suna buƙatar amfani da fiye da lasafta.

Haɗa baka da Crusades

Ana amfani da haɗin brackets don haɗa CD a cikin layi madaidaiciya lokacin da aka sanya GNLUS. Idan ɗakin yana da nisa ko tsayi ƙasa da 3 m, to, baka bracketings ba su amfani. Idan dakin yana da mafi girma ko tsayi, to,:

N = (l / 0.4) - 1) x k

Ina n shine haɗi brackets;

L - tsawon bango a cikin dakin;

K - gyara mai inganci.

Ya danganta da nisa na ɗakin, gyara mai daidaitawa yana da girman:

• 3-6 m, k = 1;
• 6-9 m, k = 2;
• 9-12 m, k = 3.

da sauransu

Abubuwan da ke cikin giciye (masu fashewa), waɗanda ake amfani da su don haɗa bayanan CD a wuraren da suka fice, ana ƙididdigawa bisa tsarin tafiyar HCL.

Mataki na ashirin da ke kan Bango: Wallpaper a bango: hoto a ciki, a ƙarƙashin Mural don dafa abinci, abin da za a zaɓa a cikin gidan, phlizelin, mai kashewa tare da tasirin frechoes, bidiyo

Ya kamata a lura cewa saboda babban farashin hadawa da manyan baka da Crusudes, da wuya a yi amfani da su. A matsayinka na mai mulkin, CD na bayanin martaba yana da alaƙa da girman da ya dace kuma yana ɗaukar bangon gefe tare da haɗin gwiwa tare da taimakon ƙwayoyin baƙin ƙarfe.

Misali na kura kayan a karkashin rufin plasterboard.

Misali ga masu amfani

Nawa ne kayan bukatar rufe rufin? A ce muna bukatar ganin ganuwar ɗakin 4x5 m tare da tsawo na 3 m. Sannan op zai zama s = (5 x 2) + (5x2) x 3 = 54 sq. m. Daga wannan adadi, ɗauki mita 7. m. - yankin na windows biyu da kofofin. A sakamakon haka, ya zama dole ne ya zama dole a raba murabba'in murabba'in 47. m bango. Bayan haka, lissafin GCC da abubuwan da suka gabata ya faru:

1. Standarys na Standards na filasun 2500x1200: 47/3 = 15.6, zagaye har zuwa 16.
2. Profile UD: kewaye ((4x2 + 5x2) / 3 m tsawo) x2 - (18/3) x 2 = PC 2 =.
3. CD. Mafi kyawun zaɓi zai zana tsari don daskararren bushewa kuma ya riga ya ɗauki komai adadin bayanin martaba. A cikin lamarinmu, don ganuwar, ana lasafta kamar haka: kewaye (4x2 + 5x2 5x2) / nisa tsakanin bayanan martaba 0.6 m = 30 3 m.
4. Cd ƙarin cd. Daidai da kewaye dakin ((4x2 + 5x2) / na tsawon 3 - 18/3 = 6.
5. An dakatar da kai tsaye: a kan mita 1 uku ba gwal 5. Dangane da, 30 x 5 = 150.
6. Dowels: Hanyoyi na kai tsaye 150 x 2 = 300 kuma don hawa UD 12 x 10 = 120. An samo Dowels tare da gefe.
7. Lokaci na kai: Hanyoyin dakatar da kai tsaye 150 x 2 kuma don haɗe-rikicen ƙari cd 30 x 40. Zai fi kyau saya 500 tare da gefe.
8. Sukurori don bushewa: Glk 16 x 50 misali na da amfani a kan lgk = 800.

Kuma tuna cewa kafin yin lissafin GNC kuma fahimtar yawan abubuwan da ake buƙata, kuna buƙatar zana tsarin hawa. A wannan yanayin, zaku san yadda kayan da zaku buƙata.