Warm glazing in the action of warm and cold glazing. The difference between them is principled: cold glazing protects against noise and dust, no more. For him, it is not required to warm and seal the balcony or loggia. In this case, it is believed that the loggia is most likely part of the street than apartments. And at least it is in an apartment, roles similar to the roles of other rooms, does not fulfill.
What is a warm glazing
The task of warm glazing is to maintain heat indoors. This is a complex process that consists of several events at once. Mandatory is the installation of double-glazed windows at least with one chamber, or a double frame.If the region of living is distinguished by prevailing low temperatures, the structures for the balcony, the double-glazed windows are selected more complex.
The key to the success of warm glazing is the maximum sealing. Without this point will not be in the event - warmly will go.
Therefore, all the slots, walls and the floor must be inspired:
- The gaps and outstands are perfectly sealed by mounting foam;
- The floor is insuading so - on the concrete there is a draft floor, under which the thermal insulating layer is spawned, and on top of the laminate or linoleum.
Warm balcony scheme
Often, the owners decide that the replacement of cold glazing opens up great opportunities, and the wall between the loggia and the room is demolished. The loggia becomes part of the room. Of course, high-quality insulation will help in this matter.
Glazing types and their characteristics
Various materials are used today in glazing. Wood frames do not lose their positions. But other materials compete with a tree.
Characteristics of glazing types:
Wooden frames the most common design
- Wooden Rama . Cheap, affordable design. However, she still has its drawbacks: the glass is attached to the stroke, and the formation of cracks in the frames usually the question of time. But, by the way, and on it can be viewed optimistic - such microventilation ensures that there will never be on the loggia with wooden frames.
Article on the topic: Overseas Adhesive ASM, General Overview
Aluminum Rama
- Aluminum Rama . For cold glazing, it is fine, but for warm - alas, they are practically not used. The fact is that aluminum frames can be installed only in one layer, and it is not practical at all for energy saving. Large heat losses are inevitable due to the fact that it will not be tightness.
The most progressive frameless glazing
- Frameless glazing . The case when locks and loops will be installed immediately on the glass. The glasses are so customized to each other that the gaps between them can be said are excluded. But this is beautiful, expensive, impressive appearance glazing is only cold. And all due to the fact that there is no tightness.
Glazing using PVC profile
- Frames made of metalplastic . It is impossible to be satisfied only with the installation of plastic glass windows, the floor and the walls will still have to warm. Plastic frames may include glass of different shades, which increases the aesthetic characteristics of the window. In addition, good sound insulation and protection against dust penetration is another argument in favor of glazing with metal-plastic frames.
Installing double-glazed windows or invite specialists - it all depends on your readiness. For those who decided that the replacement of cold glazing to warm can be carried out on their own, further recommendations.
Install glass accesses alone
The order of work is not so simple, but if you figure it out, all actions in the presence of elementary skills can be performed by itself .
Installation of warm double-glazed windows is carried out ten steps:
- Make measurements and order the appropriate frames . Specialists do not advise, to acquire the framework of standard sizes, arguing this by the fact that the variation of the dimensions almost inevit. When you remove the sizes, note that you need to leave the gap for the mounting foam (on each side about 30 cm).
- Disassembly Ram. . First of all, frames are installed, and only then sash.
- Rent a frame . Pull out the pin from the top loop, tilt the sash, remove it from the bottom pin.
- Dismantling glass . Shoot the spindle between the frame and a long stroke. Take the spindle. So removed and all subsequent headquarters.
- Emboss Frames by level . This measure is needed that there is no distortion.
- Fastening to frame walls . This will help anchor bolts and screws with plastic dowels. Sometimes and galvanized steel plates are used, it is done as needed.
- Window flaps are installed in place . Do it together, as much as possible.
- Clear . The gaps that remain should be used. And after that, close all the sash.
- Cooling foam. When foam froze, wooden strips are cleaned, and the place they was released is filled with new foam.
- Regulation of sash . Adjust the sash, carefully remove the foam residues.
Article on the topic: Stair railing external and internal for home and summer cottages
Schematically, the process of replacing cold glazing is as follows:
- Seal, windows, glasses and staps are removed.
- Sealing procedures. The joints are insulated.
- Waterproofing node. Warm cavities.
- Mount the lids and fit pictures.
- Mount the windows themselves.
To improve thermal insulation, it is recommended to install single-chamber glass windows with heat-saving glasses.
If it is planned that the balcony or loggia should be part of the room, use frames from metal plastic with a triple glass.
Insulated balcony becomes a continuation of the room
A very important point - it is impossible to change cold glazing to warm with a change in the facade of the building. Unless, of course, you secured the resolution of various instances, this is another question. But an independent decision, without attracting relevant specialists, this is not done.
Insulated balcony turns into a cabinet
Functional continuation of the kitchen
Warm facade glazing does not apply to luxury - rather, this is a need for a comfortable stay and rational use of an apartment area. You can find a budget option, enlist the help of experienced friends and save at the invitation of specialists.
Good work!