To date, the construction market is filled with such a variety of finishing materials, which will not be difficult to choose:
- clinker;
- brick;
- Terraced board;
- porcelain stoneware;
- concrete;
- Finishing siding, etc.
Terraced porch
But, it is a terrace board when designing a porch at home looks very beautiful, and also has many advantages in its operation. Such material is very easy to install, so knowing all the subtleties, you can easily handle it with its installation on your own on your own.
What is Deground?
Making a porch with your own hands
Deoping is a wood-polymer composite (DPK), which sustainably withstands any external stimuli. Decoping production is performed on a very complex technique, for which the polymer resin and natural wood chips are used. After complex mechanized effects, a solid and durable monolithic design is obtained from such ingredients.
Decing has such positive features:
- It has a clearly pronounced wood fragrance;
- does not allow fungi and mold to develop on its surface;
- does not give in short changes;
- The material is safe in operation and does not slide, even after wetting;
- Not used by rodents as food;
- The material is not terrible precipitation and direct solar rays;
- easy to install with your own hands;
- It has a wide variety of colors and patterns (there are instances that are difficult to distinguish from natural wood);
- not dissipated;
- Even under severe load does not creak.
To create Decing, you can use valuable wood species, both ordinary deciduous and tropical. More expensive and exotic tree is capable of listening to about 60 years, while niche is a deciduous material - no more than 25. But, of course, the determinant breed is much cheaper, which is often a decisive criterion when choosing a material.
According to experienced finishes, the DPK still has one drawback - it is impossible to sheathe the round design. Such a disadvantage is due to the specific structure of the board.
Article on the topic: Methods How to beautifully lengthen the curtains from below
Term Board Mounting Technology
Porch do it yourself
If you decide to equip the steps from the terrace board, it is better to choose a cloth from more expensive wood, because they will serve longer than cheaper deciduous material.
But if your family budget does not pull expensive finishing materials, you can equip the house and DPK from the cheap series. If you buy the material from the deciduous tree of the tree, immediately buy and plugs for the end of the board. The fact is that cheap DPK are made by hollow inside, and if they do not put the plugs on them, they will seem unfinished.
You can cut the decophan on the necessary segments using a circular electrical saw to which a special disc with small teeth is installed. You can also use ordinary hacksaw.
I would like to note that it is important to observe the height of the steps the same, because if such a requirement is not respected, the inconvenience arises in operation.
Another nuance. If you mount the stage at an angle, be prepared that during the rain all the water will flock over them. Stacking steps can be made on the foundation from concrete. Also as a basis, you can use a wooden or metal frame.
Installation of steps from decoping is performed in the following sequence:
- On the pre-prepared framework, lags are established and recorded using self-samples. Pay your attention that lags need to be installed in parallel to the descent. Self-tapping screws need to be screwed into the center of lag. The step between them should be within 40 cm. Try to clearly set the lags so that the ends of the terraced board coincided with the supporting element.
- Then the installation of steps begins. At the same time, it is necessary to leave the gaps between adjacent bars. Such a gap does not allow the tree to deform, which will lead the temperature and humidity drop during operation. Basic starting board firmly attached to the frame of the starting clips.
- The subsequent board is mounted on a clips of a clips, which helps to form the necessary slit between all individual elements.
- Next, you need to need a corner of a M-shaped form, which must be fixed on a terrace product, which performs the role of a risk. By the same principle, all other beads of steps are mounted.
- Upon completion of the installation work, all angular junctions will have to close with a decorative plank.
Article on the topic: Bathroom heaters
The decoration of the porch terraced
Self make a porch of a terrace board
DPK is an excellent choice for the design of the floor covering the large area. But, it is better to take advantage of a special type of product, which is equipped with the ends with special grooves. Such gaps help to form a flat plane.
Installation of DPK with grooves is performed simply by a special scheme that it is much faster than to make a brick porch or use clinker.
As you can see, the installation is quite simple, but before you start working, read the following subtleties of this process:
- All the time, leave a small slot between the canvas no more than 1.2 cm. Do not worry, after all, a year later, such gaps will not be so visible, but your material will be removed from distortion.
- Do not use the cloth to work, the length of which is less than 20 cm. Due to too short boards, the risk of coating deformation will increase.
- DPD width depends on the length of the flicted flooring. Most often for length up to 12m, a cloth is 30 cm wide.
Well, now you were convinced that the use of a terrace board helps in creating high-quality ladder design, and also extends the service life of a staircase march and makes them more attractive?
What other materials can I make a porch?
Trim the porch terraced board
To date, the choice of finishing material for the design of the porch at home or in the country is very diverse. The penetration of the porce of porcelain is most popular with a terrace board. You can also often see a brick porch, a concrete porch or a stone porch. As designing a country house, a concrete porch is very often found, for the finish of which the clinker is used or siding with siding, which significantly reduces the cost of work.
Porcelain stoneware for the porch on the street either the porch of the paving stones is the most popular solution for the design of the stairs. For cladding such steps, clinker is used.
Article on the topic: Concept and varieties of blinds
Clinker is a resistant to low tile temperatures, which is designed specifically for the street. Clinker has such advantages:
- resistant to temperature shifts;
- Material withstands mechanical loads;
- Clinker is considered an attractive material;
- abrasion resistant;
- No moisture is afraid.
Also, many positive qualities have a concrete porch with their own hands, which will not be difficult. Such steps are not afraid of moisture and serve long enough, the main thing is to make a formwork efficiently.
Another finish option - the design of the porch siding. Siding decoration is well suited for vertical surfaces, for which only a doom is needed. Siding design allows you to choose the necessary texture and color, as well as decorate the porch with various original elements.
Siding finish:
- no moisture is afraid;
- It is not amenable to rotting, fungi and insect;
- non-toxic and fireproof.
Porch using terraced boards
In the table we compared the terraced board and clinker in more detail.
| Characteristic | Clinker | Terraced board |
| Length | 193, 240, 250, 295 mm | 3000, 4000 mm |
| Width | 57, 71, 120 mm | 140, 161 mm |
| Thickness | From 7 to 25 mm | 25 mm |
| Weight | Up to 3.5 kg b1m2 | 2-2.6 kg in 1 chalkboard |
| Water absorption | 4.5-6% | 3% |
| Density | From 1500 kg / m3 | 1275 kg / m3 |
We have given you only a small comparison of two common finishing materials, and the choice remains only for you.