Plasterboard is suitable for creating a wide variety of decor elements: from the simplest designs to unusual and unique designer ideas. And one of the most common areas of GCC is the creation of a semi-killer or arches. Properly created half dead can decorate absolutely any room.
One of the advantages of drywall is the ability to create complex structures, such as arch or half agear.
A half-day of plasterboard is a beautiful curvilinear design, overlapping the doorway. Such an element of the decor fits perfectly into any interiors, striking with its originality, ease and attractiveness. If you wish, you can make a half-year of plasterboard with your own hands.
How to decide on the choice of arch design?
Before making a half morning, you need to decide on the type of design. Plasterboard allows you to create any curvilinear systems. It is due to its versatility that this material found such widespread use in the design of window and doorways. There are two main types of structures that you can make a drywall with your own hands:
Project diagram Arches from drywall with dimensions.
- Constructions having a permanent radius of curvature.
- Systems with variable radius of curvature (the most popular option is semi-terminals).
The first type is best suited for high door openings (about 250-270 cm). It can be performed in the classic version and in the style of modern. The classic solution is suitable for almost any rooms. Best of all, similar seven kits fit into wide openings. Modern is more compact, and it is best to use a similar system in interroom partitions.
A half-day of plasterboard is the most popular architectural solution with a variable curvature radius. The arch is quite easy to do on your own. She will fit perfectly in any interior and emphasize his individuality. Many years of successful use is the best proof of the practicality of such structures.
Article on the topic: Types and stages of construction of columnar foundations
Initial stages of work
A set of tools for working with plasterboard.
Preparation begins with the fact that the doorway in which a half-year of plasterboard will be equipped with an old finish and is thoroughly cleaned from different kinds of contaminants. After that, a markup is applied on the surface of the doorway, which will be installed the framework frameworks and other elements of the structure. Do it with the mandatory use of measuring instruments to result in the design of the highest quality.
Prepare the following tools for work:
- Electric jigsaw.
- Drill.
- Scissors for metal.
- Screwdriver.
- Measuring line.
- Perforator.
- Hammer, selflessness and dowels.
After that, you will need to fix on both sides of the doorway on two guides. To withstand such a distance from the edge, which will correspond to the thickness of the acquired sheet of plasterboard. Such a move will allow you to get a perfectly smooth surface without any kind of protrusions and irregularities.
Mounting profiles to the wall for the installation of plasterboard.
Next, under the assembled guides, a horizontal profile is fixed. Use an element with a slightly curved lower end. As a result, you will get a very beautiful and reliable inclined surface. After that, exactly attach profiles from the opposite side of the doorway. On this frame of the future half and the drywall will be ready.
It is important to make everything that the finished half and the most stable, reliable and durable. Try to correctly fix all the elements of the system so that in the future they did not have the opportunity to leave our place. Use dowels for fastening guides and profiles. Between themselves, structural elements are fastened with special bolts. For mounting sheets of plasterboard, you need to use self-designed screws specially designed for this purpose. When installing profiles, use the sealing tape. It will make the design more reliable and durable, as well as further increase the noise insulating properties of the system.
Article on the topic: How to glue vinyl wallpaper on paper based correctly: reviews, video, what glue is better, how to remove, is it possible to paint how much dry
Step-by-step instruction on the construction of construction
After you fully complete the framework of the frame, proceed to its trim. Plasterboard buy this size that will correspond to the size of your doorway.
It is better that the leaf is a little more than the opening, because If necessary, it will be possible to cut it without any problems, and to increase the dimensions of the small sheet so simply will not succeed.
Diagram of preparing the template of the arc from the sheet of plasterboard.
Draw on a sheet of drywall arc with the desired parameters, take the electrolovka and cut the design over the applied markup. After that, make another exactly the same item.
Attach the blanks to the frame of the frame pre-assembled and fixed in the doorway. First you will need to create special guides. They are fixed at the bottom of the seven. You also need to make the guide curved form. Make them quite simple. Take an ordinary steel guide profile. With the help of metal scissors, prepare cuts on the side and rear profile. To withstand the distance between the cuts of about 60 cm. After such training, you can exhaust the profile without much effort, the profile is as required.
Order of fixation of plasterboard
At this stage you will have to fix the plasterboard. Prepare sheets of the desired shape and sizes. You can mount them in several ways. The method is most often used, according to which the parts are fixed on the guides in the doorway, and then the curved part is mounted below. In accordance with the second method, you first need to attach curved guides to sheets, and then insert and securely fix the design in the opening. You can use the method that is more convenient for you. The result under any circumstances is equally good.
Mounting plate of plasterboard to the frame of the arch.
As a rule, the lower band of the structure is made curved. To do this, you need to pre-bend direct item. You can make different methods. Most often used the most convenient, fast and budgetary. In accordance with it, the band must be installed on special backups and bend, making mechanical efforts to it. No need to act too rude and strongly, under high pressure, the material may simply break. The problem is that plasterboard is a rather fragile material and requires the most accurate relationship.
Article on the topic: Compact toilet - an ideal solution for a small bathroom
Another way implies a preliminary creation of superfit on the inside of the sheet. Such needles make the flexing process even easier. You can use another way. In accordance with it, the material must be mixed with some water using a brush to apply it. By drinking water, the leaf will begin to fake under its own weight. Another method involves the use of needle roller. It allows you to create elements with almost any form, parameters and bending.
Backlight and Finishing Installation Guide
If you wish, you can equip your half and the original backlight from the drywall. To do this, before fixing the sheets to lay the wiring in the created design. The sheets are made in the size of the selected lamps. Next, the design is finally assembled and fastened with the frame of self-reserves.
At the final stage of the creation of a half diet, you have to appropriately handle the design. First of all, close the joints and seams with the help of a reinforcing mesh and special sealants. From above, the entire surface is sweeping. If you wish, you can glue with liquid nails protective corners. After that, make a cladding half agear. To do this, you can use any existing decorative materials. Pick them in accordance with your individual preferences and necessarily make sure that they fit into the overall interior of the room. Good job!