The modeling on the walls of the interior was always considered a sign of a good taste and wealth. Today, despite the fact that there are a wide variety of various gypsum and plastic finished elements that can be decorated with walls of a room in the house, but the modeling on the wall will deliver a lot of pleasure on the wall and makes proud of your work. Still, because you made it yourself. Someone maybe think that the modeling on the wall is difficult. Not at all. Each person who even never scared before, can easily cope with such work. It would be only a desire to create.
Beautifully decorated modeling will decorate any wall, make it dear and stylish.
How to make a laying on the wall with your own hands
This will require:
- Building mixture for plaster;
- Sculpture clay (or other material);
- stacks, knife, kneading capacity;
- Rock.
Before proceeding with the modeling, you should prepare the wall of the room, it should be carefully leveled with plaster. Clay for the modeling should be mixed so that it does not stick to the hands. Elements of the planned composition will be formed from it. Part of the clay is mixed in the container to the state of the liquid sour cream. It is called a slip and needed to connect the finished elements to each other.
Tools for modeling.
You can sculpt anything, but most often various vegetable compositions are made. From a piece of involved clay, you need to break as much as it is necessary to create one element, and the rest of the clay should be kept wrapped in wet cloth and plastic bag. It will keep it from drying out.
It is possible on a simple example to consider how the grape cluster is very simple. You need to take a sheet of grapes, put it on a polyethylene film and circle along the contour. It will be a template. Then the clay and shlice is mixed. A piece of clay is rolled up with a rolling pin in a cake and is attached to the surface of the wall with a slicker. The template is placed on the clay and rushes along the contour. Using tools, an extra clay is removed. You can use both professional tools (stacks) and any foolish. First, the contour of the sheet is formed, and then the inner part (streak and deepening).
Article on the topic: 3d wallpaper for kitchen
The sheet should be on the vine. Therefore, a thin harness is rolled out of clay and attached to the wall. Then the balls roll out of clay and a bunch of grapes is formed. After the manufacture, the composition should dry. Then, along with the wall, it is covered with primer and paint with water-mounted paint or running. You can make a color composition, adding a color to paint and using artistic brushes.
Modeling with putty and other materials
Instead of sculptural clay, you can use putty. It is mixed in the tank, applied to the wall and, while the spacure is raw, the elements of the composition are formed. It is recommended to form sequentially small areas, since this material dries enough quickly. Instead of putty, you can use gypsum or alabaster.
Photo 1. Step-shit embossed painted walls will decorate the children's room.
The described method can be decorated with a wall with relief. But you can make a surround image and decorate, for example, a wall or angle of the children's room. A child from such an ornament will simply be delighted (photo 1).
The easiest way to do all the same vegetable compositions, as in the example above with grapes. Consider how you can cut the bulk branch of the tree with leaves and a bird sitting on it.
In order for the branch to be volumetric, it is necessary to make a frame. It is made from the wire that is screwed to the wall of the room using self-tapping screws. In the wall in the places of fasteners, it is pre-drilled holes and drive the plastic dowels in them. Wire fixed on the wall should be wrapped with a bandage and deceive with a solution of sculptural clay, putty, gypsum or alabastra. Using a knife, you need to form a tree bark on the resulting branch. It remains only to attach the leaves and put a bird on the branch. The bird is easiest to cut out of clay, as it is more plastic.
After drying, the whole composition is painted. You can use gouache or water-emulsion paint by adding a kel into it. It looks like this decoration is simply great, especially if you make a backlight with a small point lamp with a directional beam of light.
Article on the topic: Installation of a glass door to a sauna: Recommendations
Decoration living room stucco composition
The wall in the living room can also be decorated with a large vegetable composition flipped from putty. You need to choose an open surface that is not closed with interior elements and furniture. As already mentioned, the wall should be completely smooth. It is easier to work with vegetable elements, since symmetry is not required. The living room is more suitable composition with large details, such as a large flower or tree.
Photo 2. You can decorate the living room with a stucco composition with a putty.
First, the contour is drawn on the wall surface. You can then dilute the putty and put it with a spatula on the wall, right there by forming the desired part of the part with a knife and other girlish tools. If the putty is dry, then you can trust the work, carefully cutting up too much. But it is still easier to work with raw material.
It is possible to work with a putty and in another way, overlapping it with layers by forming a volume. Each layer must dry. The lower layers are not necessary to smooth out, so they will be better to hold on to those that are superimposed on top. Some craftsmen recommend to knead the putty, adding toilet paper to it to give a solution of the best plasticity.
Such a flower or tree on the wall of the hall will not only decorate the room, but will serve as a subject of your pride, because All this you did with your own hands.
So, decorate the walls with a stupid is not difficult and does not require professional skills, especially if you use the useful recommendations. You need to use your fantasy to create a truly original composition (photo 2).
It should be noted that the stucco composition looks many times more attractive if it is highlighted.
Therefore, choosing a wall for work, you immediately need to determine where the lamps can be installed.