Assembling frame of the balcony block from PVC profile

Installing a balcony block with your own hands sets many tasks in front of a novice master. It is necessary to make measurements taking into account the quarters of the window, order and bring a manufactured design to the object, to properly prepare the discovery and, which is very important, correctly assemble into a single whole unit itself. The competent assembly of the frame of the balcony block from the PVC profile is that the connection of the door and the windows to each other turned out to be durable, hermetic and in the end did not warm during the cold weather. In this article, you will find several useful recommendations on how to properly assemble the balcony block.

As you understand, the future node of the adjoining of two design elements requires careful sealing. Lock the door frame on the floor loop down and apply the mounting foam along the rib frame located on top.

The foam layer must necessarily pass the primary polymerization process. These 15 minutes should be spent on the preparation of the window. With the help of a screwdriver and a 5-millimeter drill, screw the window profile in three places from the opposite loop so that the holes come out in the center of the fastener of the frame. Supervise better from the outside: first, it's easier and more convenient; Secondly, it will help to avoid damage to the sealing gum by a rotating element of the screwdriver.

While you will be engaged in the window, the adhesive applied by you will already acquire a suitable consistency: the foam will cease to be viscous and sticky.

Please note: Compliance with the norm of primary polymerization helps to avoid unpleasant consequences, since accidentally compressed areas of fresh foam lose the ability to expand, which deprives this section of tightness adjoining. The refrigerant crust protects the substance from careless touches. At the time of the connection, it will burst, release the adhesive composition, which guarantees the manufacturability and reliability of the joint.

Now install on one of the designs of the connecting profiles, previously removed from the RAM protective film. Additionally apply some mounting foam for better gluing and connect the door and window frame. Be sure to align the horizontally all the details before finally bore them with each other. For the final assembly stage, we will need a screwdriver, a bits of pH 2 and self-tapping screws with a drill.

IMPORTANT: Do not screw the screws too much so as not to deform the profile, while their lengths should be enough to pass through the first part and entrenched in the reinforcement of the second.

As you can see, the assembly of the frame of the balcony unit is not so complicated technologically, so as not to take up it with their own hands, without the involvement of outsiders who blame themselves by professionals.

Article on the topic: How to make a ladder ladder with your own hands