Sometimes people have the need to replace the old toilet to new, and it happens on a variety of reasons, starting with the fact that the old toilet no longer has an attractive appearance and ending with the fact that it has completely spoiled. You bought a new toilet or put the old one, it must be fixed to the floor. The process must be considered in more detail.
Toilet sequence.
First of all, it is necessary to prepare a platform for installing toilet bowl, after which it is necessary to make the basis for it. The base for the toilet should be durable and withstand not only the weight of the toilet itself, but also the person who will use it. In addition, the toilet serve for many years in a row, and subsequently did not swing without wood and other items under it, to prepare the grounds for plumbing, it is necessary to approach with full responsibility. To date, the inner and external mounting for toilet is distinguished, each of them has features.
Mounts for toilet bowl
Today, the toilet to semi is attached using screws and dowels, epoxy glue, as well as wooden taffeta.Varieties of toilet bowls.
Consider in more detail each case. If you are going to use epoxy glue to install the toilet to the floor, the first thing you need to carefully clean all the surfaces to which it will be applied. In addition, they are necessarily necessary to degrease, using acetone or any other solvent for this. Then you can safely begin the manufacture of glue. If it is made correctly, in full compliance with the instruction, it can be used for 1.5 hours. After the glue is ready, it will be applied to the floor and the bottom of the toilet (at the corners) with a relatively small layer (no more than 4 thickness See at least 20 cm²).
After you apply glue to the floor and the bottom, you need to install the toilet to place and firmly attach to the squabble, it is desirable to press him. Then it must be left for approximately 12 hours so that the adhesive mass grabbed. It is not necessary to touch the toilet and use it before this period does not expire, otherwise it can shift.
Article on the topic: Corner photo wallpaper for two walls
This method is most appropriate, if the floor is in the toilet from the tile, because to use to fit the toilet on the tile of screws, dowels or a wooden taffetta inexpedient. No need to possess special skills or knowledge to use epoxy glue for fasteners, but to see the final result, you will have to wait.
Dowel and screws
The scheme of options, with what taps there are toilets.
Consider the second method - fastening the toilet with dowels and screws. At first it is necessary to decide on the installation site of the toilet bowl, and when you install the toilet in the optimal position, on the site of the fastening sleeves it is necessary to make a markup for future holes in the floor. After with the markup, it will be finished, you can remove the toilet, take the drill and drill and carefully make the necessary hole. The depth of such holes traditionally does not exceed 5-7 cm. It is necessary to work carefully as coated, where you make a hole and with a drill. For example, if you make holes on the tile, then during hasty work you can spoil the tile or from overheating the drill can burst, which cannot be allowed. After several holes are made, you can proceed to the drilling of concrete. It is necessary to prepare the appropriate drill on concrete in advance and measure the length of the dowels. In most cases, the depth of the holes is about 6-8 cm.
Installing the toilet.
The next step is to clean the holes and dirt created by you. After that, it is necessary to fill in them a sealant or a special glue for the tile. Fill the hole is necessary until it is filled. After that, in the holes it is necessary to insert a dowel until it stops. It is necessary to do this until the dowel does not hide in a niche so that he does not stick over the surface. If there is an excess silicone or glue, they will need to be removed so that the toilet is subsequently stood smoothly. Make it can be using a cloth or rubber spatula. After this uncomplicated procedure, you can consolidate the toilet to the place. The toilet is mounted where the holes under fastening sleeves were made. In this case, the silicone can be used to further compact the bottom of the toilet. After the toilet is installed, it is necessary to spin the screws into the fastening sleeves. Included usually go caps for screws, thanks to which the appearance of plumbing will not suffer. The plug must be attached next turn.
Article on the topic: How to roll - linoleum on laminate or vice versa?
As a result, it turns out that everything is ready and the toilet is ready for operation, it remains only to remove the surplus of silicone, using a solvent or white-spike. The second option is preferable in this case, since it does not spoil painted surfaces.
Wooden taffeta
Toilet device.The last and classic method of installation of the toilet is to use for this wooden taffeta (boards). In order to take advantage of this type of toilet mounting to the floor, you need to make the opening in the floor to which you want to put your taffeta. The dimensions of this hole must be perfectly coincided with the sizes of the taffeta. After the taffeta is installed in the recess, it will have to be filled with concrete solution to finally fill the base for the toilet. Not excess will be taken care of the additional reinforcement of the entire future design. In order to do this, you need to "knock down" anchors into the board. It is necessary to do this in such a way that they oppose the board for several centimeters (2 cm is quite enough). After the base (concrete solution) is dry, it is necessary to fix the toilet to the taffette through the holes in its riding. To do this, you can use screws that first need to lubricate tavot.
It is necessary to mention that if you are going to install the toilet, using this option, it is possible that the bed toilet in the process can be spoiled. To avoid such trouble, you need to put in advance under the head of the screws, which will be used for fastening, a piece of any rubber product or leather products. If some parts of the products come from under the screws, they can easily be eliminated using a knife or scissors for this. In addition, such pieces can be hidden using plastic or brass washers.
Unitaase installation circuit.
Thus it turns out that not all methods for fastening the toilet to the floor will allow you to use them immediately. For example, in the first and latter case, you first need to wait a certain amount of time (about 12 hours), in order for glue and the concrete mixture to dry finally. Otherwise, if you enjoy the toilet and will not wait until its base dry out, it can shift that he will entail new problems. Therefore, it is necessary to find a solution to such a problem in advance. Of course, there is always the third option, the so-called "Golden Middle", thanks to which immediately after installing and fastening the toilet to the floor can be used. The use of screws and dowels does not require any time to wait, which means that immediately after installation and connection, the toilet can be used to operate.
Article on the topic: how to sew curtains with lambrequins do it yourself: patterns and cutting
Naturally, you will need much more time to install the toilet - first, it is necessary to make holes in which silicone poured and the dowels are attached; Secondly, install the toilet, consolidate it with screws and remove excess silicone mass. All this requires a certain time.
In addition, in case you have a need to not "injury" tiles, you can use, as mentioned above, epoxy glue (resin), silicone glue or liquid nails.
Following the results
Thus, it turns out that in the end, everyone himself decides in which way it takes advantage - epoxy glue, dowels with screws or a wooden taffeta. The final choice directly depends on the preferences and wishes of each person separately, and on the material that is used on the floor in the room, where it is necessary to fix the toilet. The final decision is influenced by a huge number of factors: the presence of free time, the amount of funds that will need to spend, time for all necessary works, etc.
Anyone can use the services of specialists in this area so as not to spend their strength nor precious time. In this case, it is practically guaranteed that the work performed will be done qualitatively and it will not be necessary to regret the tools spent. It will be possible to get the necessary result in the shortest possible time and with high quality performance, but this output is only suitable for those who are able to pay for this the required amount. Otherwise, you can spend the necessary work on your own, most importantly, in such a matter - to use the provisions provided and clearly follow the instructions, especially if you have not encountered such a procedure personally.