Spiders have few people associated with pleasant moments. But in fact, this insect is a symbol of well-being, good luck. In the article you will learn how the spider is made of beads with a scheme and description. This is painstaking, but very entertaining work. Even newcomers, using the instructions, will be able to make themselves a small mascotian for good luck or as a gift to friends closest. It is necessary to start with the preparation of the material. Carefully read the technique and select yourself the appropriate option.
Volumetric pack
One of the most common is the model of a thick packer-talisman. Weaving is quite simple and understandable, suitable for beginners. The following materials will be required:
- Wire Motor with a diameter of 0.2 mm (approximately 130 cm);
- about 1 meter of a thin fishing line;
- 5 grams of beads of different colors;
- needle.
But the main thing is to be patient and attentive. For clarity at the end of the article, a learning video is given. In the example, red and black bispers No. 11 are used.
Weaving in stages
Three red bispers are rolled onto the wire and are located exactly in the middle.
One end of the working thread (wire) is passed through two beads. The loop is neatly tightened.
The second end of the wire turned out to be slightly longer. Four red beads are put on it. The loop from the end of the same half of the wire is again dragging. It has been doing through 2 medium beads.
Slightly tighten the resulting workpiece and flexing in the middle. Mustache Future Spider Ready!
For the manufacture of the head, a parallel weaving technology is used. Three red beads are rolled on one of the wire, the second end stretches through them in the opposite direction. Large loop is delayed. The next row on the colors of Beerin: black, red, black. These are your masterpiece eyes.
When tightening the wire, it is worth a little bend it and raise the arc to the top to add head volume.
By the way, the eyes can be made from the beads more, then the figure will get more interesting.
Article on the topic: Apron for the waiter: patterns of several options for sewing
The next step is similar to the previous one. Four red bispers are rolled on the wire, the second end is doing and neatly tightened. But now the loop must go under the previous series. Fouquer's head is ready.
Go to the weaving insect foot of needle technician. At the end of the wire we ride beads in the following sequence: 5h, 2k, 2h, 2k, 5h. A number of 16 beads passed. Take the end of the wire through 15 of them, leaving the first black.
At the second end of the wire, we do the same operations. "Warms" of the working thread remains near the head. We again go to bulk weaving. Top row - 5 red, lower - 4 red.
We repeat all the manipulations, starting with the first paw and ending with the Lower. Half of our product is almost ready!
The third series of sparse limbs is going in the following order: 3h, 2k, 2h, 2k, 3h for both paws.
Torch: top row -7k, bottom - 5h.
Go to the last long row of your paws. The sequence is this: 5h, 2k, 2h, 2k, 2h, 2k, 2h, 5k.
It remains to finish the body of our spider. According to the technology of volumetric weaving, we continue to flex a row, divided into the upper part (back) and the bottom (abdomen). It is necessary according to the following scheme:
- Top row: 9h. Lower: 6h.
- Top row: 1ч, 3K, 1ч, 1K, 1ч, 3K, 1ч. Lower: 7h.
- Top row: 12h. Lower: 8h.
- Top row: 1ч, 9K, 1ч. Lower: 6h.
- Top row: 9h. Lower: 4h. Next, we go for a narrowing.
- Top row: 3K, 1h, 3k. Lower: 2h.
The last row: 3 black beads that need to be located in the center between the upper and lower beads.
We fix our design, cut off the excess wire. Spider ready!
But it turned out soft and does not hold shape at all. This can be corrected using a prepared fishing line. Take it into the coal ear and make at the end of 2 strong nodes. Walk under the last three beads and sew the beads in two rows in the center of the product.
Article on the topic: Knitted skirts: Schemes for beginners, how to tie clothes for a woman with a detailed description
First we pass at the bottom, and then along the top. Well tighten the fishing line, we make a knot, hiding it inside the spider. Now your creation has acquired a finished look!
Variations of products
In many countries, it is believed that it is the red spider brings good luck. It is made of tubular, ordinary beads and beads. The diagram shows a six-legged sample.
It is necessary to weave it from the end of the body, and the paws are attached to a separate wire in a circle. It turns out a pretty and exclusive spider.
With the help of solid, flexible wire, bright beads and stones you can make such a wonderful creation. Spider will decorate your home or will be a pleasant presentation.
Categories fantasy, then you will create a real masterpiece with your own hands.