Domin "mai kyau" a cikin garejin, ba wuya a motsa ta wata hanya don tsara ajiyar sa. Mafi kyawun racks don gareji. A gaban isasshen sarari, ana iya yin su a bangon gaba ɗaya ko ma fewan ganuwar. Idan babu wani wuri a kasan, dole ne ku motsa sama - yi shelves a ƙarƙashin rufin. Ba mafi kyawun zabin ba, amma wani lokacin kadai. Kuma duk da haka suna a cikin garejin a cikin garejin yana da aminci a ƙasa yana da aminci, musamman idan suna da aminci a haɗe zuwa bango (don guje wa yanayi mara kyau).
Abin da rack ya fi kyau: welded ko an bolted
Racks ga garejin an yi shi ne da itace da karfe. Katako wanda ya fi dacewa - akan kusoshi da zane-zane. Ana yawan shigar dasu tsayayyen, gyarawa ga bango. Za a iya dafa racks karfe. Sai suka firgita. Akwai racks a kan haɗi da aka bolted. Wadannan zane-zane sune wayar hannu, idan ya cancanta, idan ya cancanta. Hasashensu bai dace ba, tunda akwai wasu lokuta a cikin irin wannan haɗin. Don yin ƙirar da aka fi dacewa, an gyara shi ga bango. Don yin wannan, faranti na karfe tare da rami da za a iya welded zuwa matsanancin racks (a haɗe takunkuna). A cikin wannan rami, fitar da crutch (ɗan ƙaramin ɗan ƙaramin diamita a bangon an shirya shi a bangon).
Ofayan zaɓuɓɓuka - firam daga bututun bayanin da plywood shelves
Kuma welded, da kuma bolded racked ga garejin ne service, amma sau da yawa ana auna tsarin tsarin. Zaɓin zaɓin da aka hana a cikin lokuta biyu. Na farko - zai yuwu a matsa zuwa wani gareji kuma duk kayan aikin zasu buƙaci a tafiyar da su, kuma auna ƙirar ɗari da kilogings, don haka ya kasance gaba ɗaya don motsa shi matsala. Na biyu ba shi yiwuwa ne ko sha'awar amfani da walda (idan racks ga garejin garejin ya yi da kanka). Ragowar yawanci sun fi son welded - sun fi kwanciyar hankali kuma a gaban kwarewar walda suna tafiya da sauri.
Rack racks daga sasanninta na turare har yanzu sayarwa. Hakanan su ma suna iya fahimta, amma ana haɗa su da ƙugiyoyi (a kan Crossebari) da tsintsiya (akan racks). Irin wannan tsarin ajiya ya dace - zaku iya sake buɗe shelves ga tsayin da ake so. 'Ya'yansu suna da tsada.
Zane da girma dabam
Abubuwan da aka inganta na gareji don garejin ya ƙunshi racks, crosssars da shelves. Wani lokaci, ƙara haɓakar haɓakawa, har yanzu akwai sauran ƙarfi a bayan baya - tube biyu na karfe biyu, welded / sleded / scaled zuwa matsanancin rackonally. Suna rama abubuwan da suka dace da lullube bayanan kwanciyar hankali da aminci.
Racks a cikin garejin za a iya yi ta wannan zane (masu girma dabam suna kusan)
Girman girma - tsayin da zurfin shelves - an zaɓi kusan abin da kuka yi niyyar adana. Abinda kawai zai karba da kyau - tsawon lokacin shine nesa tsakanin rakunan a sashi ɗaya. Ya dogara da girman kayan da ka yanke shawarar amfani: shelves ko da cikakken nauyin bai kamata a ciyar da shi ba. Ga abubuwa masu nauyi / abubuwa, tsawon lokacin da aka kimanta mita 1.5, idan ba a ƙara ɗaukar nauyin zuwa mita 2 ba, amma ba zai yiwu a yi ƙarin mita 2 ba, amma ba zai yiwu a yi ƙarin mita 2 ba, amma ba zai yiwu a yi ƙarin mita 2 ba, amma ba zai yiwu a yi ƙarin mita 2 ba. Idan kuna buƙatar rack don garaya na mafi tsayi, sai suka sanya rakulan iska, nisa tsakanin wanda har yanzu zai iya zama fiye da mita 2.
Mataki na a kan taken: Yadda ake haɗa Velcro zuwa har abada: Sha'awar ra'ayoyi
Bayan 'yan kalmomi game da tsawo na shelves a cikin rack. Za'a iya tayar da mafi ƙasƙantar da shiryayye daga matakin bene ta 50-70 cm (har ma idan ana so). Wannan yawanci yana sanya abubuwa masu wahala. Za'a iya yin ragowar shelves a tsayi daban-daban, 30 cm ba shi da wahala da rashin amfani. Gabaɗaya, kwalban filastik 1.5 ya kamata ya zama da kyau a kan shiryayye, kuma wannan shine 35-37 cm. Irin wannan nisa ya dace don amfani.
Abin da ke sa
Kamar yadda aka riga aka fada, racks ga gareji da aka yi da itace da karfe. Fishiraci mai sauƙi ta wurin nauyi, tare da itace yana da sauƙi a yi aiki, amma suna da yawa da irin wannan nauyi. Karfe ya fi nauyi (wanda ya fi nauyi) ya fi nauyi), amma ana iya sa su a duka giwaye.
Akwai wani farashin tambaya. Ruwan ƙarfe ba komai bane. Idan ka sayi komai a kasuwa ko a cikin shagon, a farashin ku ɗaya (tare da kayan maye) zai kashe kusan adadin ɗaya kamar yadda aka shirya. Hanya ta ainihi don adanawa shine siyan karfe akan kayan ƙarfe tare da alloli gaba ɗaya (akwai 6 m), sannan a yanka a cikin ɓangarorin da ake so. Yankan na iya zama daidai akan bayanan, dole ne ka ci gaba da biyan sabis, amma adadin kaɗan ne. A wannan yanayin, zaku iya rage farashi ta kusan 20-30%.
Daya daga cikin zabin layout
Katako idan aka kwatanta da ƙarfe ba su da yawa. Amma kada kuyi tunanin farashin zai zama ƙarami: dole ne ku sayi katako ba tare da ƙwararrun katako ba, kuma wannan shine aji "Elite" ko "Premium" tare da alamar farashin mai dacewa. Don haka ba zai yi aiki sosai da arha ba.
Daga itace
Yanayin aiki a cikin garejin ya kasance nesa mafi kyau - Tsararren zafi, sanyi, madadin girman / daskarewa, wani lokacin zafi. Ba kyau sosai ga itace. Saboda haka, duk kayan kafin aiki dole ne a kula da shi tare da maganin hana kariya da kariya da kayan kariya. Theauki kayayyakin don itace don aikin waje, a matsayin yanayin gaibi mara ma'ana sun fi kama da su. Kuna iya karba irin wannan hanyar da ke nan a lokaci guda ta danganta da yanayin da aka bi da kayan aikinku da samfurinku ba za a iya fentin su ba. Bayan sarrafawa, kayan suna bushe kuma kawai bayan wannan fara aiki.
Yadda za a haɗa brunki
Lokacin haɗa sassan katako, za ku iya amfani da daidaitattun hanyoyin don girbin - a kwata ko kuma cikakke. Idan wannan yana da wahala a gare ku, zaku iya kewaya da Jack, kuma don haɓaka mahadi don amfani da sasanninta na ƙarfe da / ko kuma saman faranti.
Wani lokaci: Don haɗa mafi kyau akan kusoshi, kuma ba akan dunƙulewar kai ba. Sai dai itace more a hankali, karancin fili shine "Clech." Idan kun zaɓi zaɓi tare da amplification faranti, ana iya haɗe su a cikin sukurori.
Garage Garage
Yanzu a girma: Don racks yawanci suna amfani da 50 * 50 mm don racks, ana iya amfani da wannan barayen da dan kadan mai sanyi - 50 * 30 mm. Oneying ya yi daga:
- allon tare da kauri akalla 21 mm;
- Danshi-resistant plywood kauri daga 10 mm;
- Layin da Chipboard;
- OSP.
Mafi rahusa shine hukumar da plywood. Layinated Chipard yana da matukar tsada sosai, amma ba lallai ba ne don fenti, kuma wannan kyakkyawan ƙari ne. Domin kada ku ciyar da yawa, zaku iya ɗaukar zanen farko da na ƙarshe a gindi - sun tsage kuma suna tafiya mai rahusa.
Mataki na a kan batun: Yadda za a zabi da kusanci ga ƙofofin: jinsunan, halaye
Katako rack a cikin gareji - zane tare da girma
Wani lokacin: shelves daga chipboard har yanzu bude gefen yanke. Idan ba lallai ba ne don aiwatar da shi, tare da hada danshi, kwakwalwan kwamfuta zasu kumbura, shiryayye zai zama mai numfashi. Saboda haka wannan bai faru ba, Tashi gefuna da silicone. Tare da irin wannan magani, ba komai tare da Chickard ba zai faru ba.
Ƙarfe
Idan ka yanke shawarar yin racks na karfe don gareji, zaɓin kayan ya fi girma - akwai zaɓuɓɓuka biyu na ƙarfe, da daidaitattun hanyoyin da aka girka. Hakanan zaka iya amfani da sassan karfe waɗanda aka yi niyya don wasu dalilai - Misali, ana amfani da rakunan na USB, waɗanda ake amfani da su dangane.
Tashoshi da shelfiyoyi - ba su da tsada sosai
Don haka abin da ke sa tsarin ƙashin ƙarfe a cikin gareji:
- Kogin karfe tare da kauri na karfe daga mm 3-4. Nisa na kusancin shelf - 25-45 cm - gwargwadon nauyin da aka shirya. M, amma kayan karfe, yana da yawa, yana da tsada.
- Tube bututu (rectangular a sashin giciye). Tare da ƙarancin abu mai ƙarfi (lokacin farin ciki bangon ƙasa ne), idan aka kwatanta da kusurwar ƙarfe yana da mafi kyawun halaye na elasticity (yana da wahala lanƙwasa), ƙarin resistant zuwa. Kantanin girma don racks 50 * 50 mm ko 40 mm, a kan giciye 50 * 25 mm ko 40 mm, bi da bi.
- Racks yi daga profrug, da katangar lantarki daga kusurwa. Kaurin kaurin karfe shine 2-3 mm, nisa daga shelf - 25 mm da ƙari. Ana tura kusurwar don kada a kama kumfa kamar a cikin "gida".
Duba yadda sasanninta suke
Anyi amfani da shelves a cikin kayan kamar na katako mai shinge (jirgi, chipbood, kawai a cikin firam ɗin da aka yi amfani da shi sosai saboda babban taro - ƙarfe .
Hukumar tana da kyau sosai ga yawancin yankuna - ingantacce, abu ne mai tsada sosai. Kuna buƙatar ɗaukar jima'i, ba tare da fashewa ba (tare da ƙarancin shimfiɗa) tare da kauri 21 mm. Bi da maganin antiseptics, sannan fenti.
Faɗin kantin ƙarfe - dogaro na babban kauri, minuses - farashi, nauyi da "girma". Hakanan ana buƙatar zane-zane, kawai tsabta daga tsatsa, sannan kuyi tafiya da keɓaɓɓen mai canzawa da ƙasa, sannan fenso da zai fi dacewa a cikin yadudduka biyu. Hakanan, ta hanyar, yana da mahimmanci don aiwatar da tsarin ƙarfe. Sannan rack a cikin gareji ba zai tsatsa ba.
Fasali na Majalisar Racks na ƙarfe
Za a iya fitar da racks karfe ko kuma tattara a kan kusoshi. Tare da waldi yawanci ba tambayoyi ne ke tashi. Idan kana amfani da kusurwa, zaka iya haɗa vattel - wani bambanci na 3-5 mm lokacin da kwanciya shelves ba a ganuwa. Idan kuna so, zaku iya yanke ƙarin superfluous a ɗayan shelves, dafa shi da jack, amma trimming yana ɗaukar lokaci mai yawa, kuma ba za ku ga bambanci da yawa ba, kuma ba za ku ga bambanci da yawa ba, kuma ba za ku ga bambanci da yawa ba, kuma ba za ku ga bambanci da yawa ba, kuma ba za ku ga bambanci da yawa ba, kuma ba za ku ga bambanci da yawa ba, kuma ba za ku ga bambanci da yawa ba, kuma ba za ku ga bambanci da yawa ba.
Yadda za a yanke sasanninta don m haɗe
Tare da taron firam don rack a kan bolts, umarnin wannan: Da farko bangarorin bangarorin da shelves ne suka tattara daban, to, su juya tare. Ga kowane fili, shi ne zai fi dacewa akalla kusoshi biyu - don mafi girman tauri (ƙarancin kwasfa).
Mataki na a kan batun: Muna yin podium don katakon ruwan wanka tare da nasu hannayensu
Idan za su yi racks don gareji daga bututun bayanin, umarnin aiki ya sha bamban. Farkon tattara bangaren gado, an gyara gajerun wando. Biyu murabba'i biyu tare da aka samo su. Sannan suna da alaƙa da giciye.
Hanyoyin da aka bolted na bututun bayanan martaba
Ta yaya zan iya yin haɗin haɗi duba a hoto. A cikin akwati ɗaya, ana buƙatar walding - zuwa Sihrar "Bayani", a ɗayan zaku iya yi ba tare da shi ba - yanke "kunnuwa", lanƙwasa kuma a manne musu.
Akwai wata hanya - tsarin crab na musamman. Waɗannan faranti na ƙarfe suna tare da abubuwan da aka gyara. An sanya bututun a cikin tsagi, to, faranti biyu suna shafa ta hanyar kusoshi.
Tsarin Crab don bututun bayanin martaba
Mai tsawo mai tsayi da irin wannan haɗin ba zai yiwu a jure shi ba, amma akwai da ƙari - ba lallai ba ne don rawar soja wani yanki na ramuka a ƙarfe. A cikin bututun mai, wannan tabbas wannan yana da sauƙi fiye da cikin kusurwa mai farin ciki, amma har yanzu yana ɗaukar lokaci mai yawa da ƙoƙari.
Af, ana amfani da kusurwoyin M8 ko M6, bi da bi, suna buƙatar manyan ramuka. Zai fi sauƙi ga fara rawar soja a bakin ciki, sannan fadada zuwa girman da ake so zuwa lokacin farin ciki. Amma ko da tare da wannan tsari, kuna buƙatar adadin abubuwan da suka dace. Don haka sun yi overheat ƙasa da ƙasa sosai, kusa da kwalba da ruwa, ƙananan rawar jiki lokaci-lokaci.
Tsarin tsari, makirci, zane, ra'ayoyi
A cikin gareji, ba wai kawai ana buƙatar rack kawai ba, amma har yanzu kuna buƙatar aiki da kuma tsayawa don kayan aiki da sauran ƙananan maɓallan wuri mai dacewa.
Za'a iya yin aikin a tsakiyar ragar. Ya dace - duk abin da kuke buƙata zai kasance a kusa, ba dole ba ne a je zuwa shelves.
Garage racks tare da Workbench suna da daɗi
Aikin na iya zama ɓangare na tsarin, kuma zaku iya yin samfurori biyu daban, tsakanin abin da kuka saita tebur da ake so. Idan wannan wurin ba ya son shi, zai yuwu a canza saiti - ko da yake sanya kusurwa.
Amma ga benci don kayan aiki. Akwai zaɓi na masana'anta - takardar ƙarfe mai ɗorewa tare da masu riƙewa suna rataye shi. Tunanin yana da kyau sosai ban da farashin.
Dace)))
Kamar yadda aka saba, akwai gidaje da yawa (wane irin gareji da yawa ba tare da su) a kan wannan batun ba. Tunani da sauki ne, watakila ba m, amma dadi:
- A kan allon, takardar chiboard, cllywood, cika kusoshi ga kowane kayan aiki. Domin kada a rikice inda za a rataye - dame da kayan aiki a wurin kuma fenti da wani launi.
Komai yana cikin tsari da kuma a wuri
- Don ƙarin kayan aiki masu nauyi - manyan makullin, da sauransu. Kuna iya amfani da grid wanda aka goge ƙugiyoyi daga saman. Grid to ƙusa a bango.
Zabi don mafi nauyi da kayan aiki
- Sanya mashaya tare da ramuka a yanka a ciki wanda kayan aikin suke saukar da su.
Wannan booth don kayan aiki yana sanya shi da sauki sosai
Kuma idan kuna so, duk ana iya saka wannan a ƙafafun - a tsaye don kayan aikin hannu. Wannan lamari ne idan a cikin lokacin dumi da kuka fi son yin aiki tare da motar a kan titi.
Kuna iya sauƙaƙe a dawo da shi
Da kyau, don wahayi ... domin duk kayan aikin suna wurin kwata-kwata))
Cikakken tsari))