Table of contents: [Hide]
- Using luminescent paint
- Laser projectors
- Fiberglass for the Star Sky Effect
- Installation of the ceiling with the projector
Among all the options for designing the ceiling one of the most attractive is the effect of the Star Night Sky. In the afternoon, such a coating can be simply monophonic white, but at night it overflows, imitating the surface of the sleeping in the night of a night in the sky. To make such a sky on the ceiling, you can use various techniques, for this, painted fabrics, special paints, optical fiber, lighting devices are used. It all depends on the size of the room, the conditions of installation and financial capabilities.
The decorative ceiling makes the room original and beautiful.
To simulate the ceiling of the sky, it is best to use modern stretch ceilings. They are very plastic, they can be applied any drawings and use as a base for fiber. In addition, such a coating is still extremely simple installation in comparison with other options. In the fabric it is easier to do holes for light threads than in the drywall, and in a concrete basis it is impossible to do it.
Using luminescent paint
One of the options, how to make the sky on the ceiling is the use of special fluorescent paints, which are glowing in the dark with various shades.
The ceiling must be treated with the antiseptic composition of the primer in order to avoid the appearance of mold.
For this, the tension ceiling canvas is purchased with the picture of the night sky, stars that will glow at the dark.
Installation of such a ceiling is not distinguished by complexity, but the technology of work depends on the selected tissue. The easiest option is that the frame is first installed, the canvas is attached to it. There are more expensive options, where the polymer fabric is first warmed, after which it is mounted on the frame. In any case, there is no need to install special expensive equipment, alignment of the base.
Space remains between the web and the basis, it can easily hide all cables for lighting devices.
It is not necessary to use the picture of the night sky, such ceilings on which you can apply any drawing to the paints, can imitate the daily clear sky with clouds, the sunset. It all depends on what effect it is necessary to obtain. In the afternoon, the ceilings can have a simple white surface, but at night the paints allow you to enjoy an unusual atmosphere.
Article on the topic: how to perform a car grounding
Back to the category
Laser projectors
To create additional effects, special laser projects are most often used, i.e., lighting devices reflecting the ceiling required pattern. With the use of such equipment, you can imitate the fall of stars, rotation of galaxies, comet flights, the northern lights, the rotation of the planets and satellites. Laser projectors are mounted only after the main coating is installed.
Tools for painting ceiling.
To install, it is recommended to invite a specialist who will program the work of the projectors. The laser device will independently work problematic.
Today manufacturers offer different options, but most often it is a rather complicated system programmable using a computer. You can set several design options that will change each other. But this option is distinguished by a high cost, so it is most often used for country houses with large rates, since the equipment itself also requires the place for installation.
Back to the category
Fiberglass for the Star Sky Effect
The starry sky effect is made using various tools, but one of the most effective is fiber. This is thin fibers from special material that simply connect to the projector. On the other hand, they are drawn through tensioning tissue. This work is quite time-consuming, since for 1 m² of the sky requires approximately 100-150 holes for optical fiber. For each opening, a different amount of this material is used - it all depends on the desired effect. You can stretch from 1 thread and up to 700 pieces.Fiber optic installation scheme Next:
- The projector to which the threads will be connected to the surface of the base ceiling in the corner;
- The frame for the stretch ceiling is mounted, separately, if possible, a box under the projector is made, where the stock of fiber will be located;
- The upper tier is mounted from plywood through which fibers have been tracked;
- The finish coating is stretched, in which the openings are made to output light beams;
- For the box with the projector, it is recommended to install an observation hatch for service.
Article on the topic: Planning rooms in a private house
Back to the category
Installation of the ceiling with the projector
To make the Effect of the sky on the ceiling, do it yourself, will have to perform such work:
- First, it is required to put the projector in a convenient location, which can be mounted for a rice carcass. This option is possible when a two-level ceiling is used. In this case, a small hatch is made in the upper surface, with which the projector is installed, is easily serviced if necessary;
- It should be noted the place where the baguette will be. It is fixed 15 cm lower than the ceiling surface level is located;
- The grid is tensioning slightly higher than the fastening profile. You can take a conventional painting grid, which is characterized by the necessary strength and small cells through which optical fiber will be stretched;
- You need to take the desired image of the starry sky, stretch the thread, creating the desired pattern;
- Next comes the most difficult stage to make the skin on the ceiling. In order to stretch the filament of the optical fiber through the fabric, you must first warm the room, carefully fasten the corners of the canvas. Using the hotel, on which a special very thin needle is attached, it is necessary to perform holes in the canvas in accordance with the location of the extended fibers. Fiber optician itself should be accurately stretched through the obtained holes so that it hangs about 15 cm down;
- The fabric can be strengthened at the corners, fill for eaves, finally fixed. This part is considered the most difficult, it is not recommended to perform it alone, since someone has to keep the material in a straightened state, and someone is to train fibers. If you do not care, then you can damage the ceiling, and the fabric cost is high enough, it will be expensive to replace it. To make the sky on the ceiling very beautiful and neat, it is still recommended to invite specialists;
- After fixing the surface, all fibers need to be carefully fixed in the wings obtained, then fuzz. The region should go on the same level with the ceiling or perform no more than 2 mm. The projector after switching on will create the necessary effect of the night sky, destroyed by bright asterisks.
Article on the topic: Dersighted roofs of private houses: species, options, device
Ceilings - this most difficult part of the design of the entire interior. Previously, they are simply and without any Zhetan, they were painted white as a whitewash, but today this option is outdated. Popular For many years now have unusual ceilings imitating various surfaces. Such a ceiling can be made with your own hands, applying different modeling options. There are expensive designs for which numerous lighting devices are used. It all depends on the possibilities, installation and finance conditions.