Lighting is the most important component of the interior. It is from the lighting that the comfort of the comfort of our dwelling depends. The game of light and shadow allows you to beat the winning moments of the interior and take attention from unsuccessful moments. And also - lamps, lamps, chandeliers and lamps create that atmosphere that we call the "house." Make a dwelling only "your", personal, individual will help unique lamps and the best way - to make lampshade with their own hands. Homemade Plafones and lampshades are the horse, which will allocate your home from others.
Safety words
In the manufacture of lamps, lamps and chandeliers in industrial environments, the minimum distance from the "body" of the lamp to the materials is pre-performed. It depends on the distance from the power and thermal radiation of the lamp and on the type (flammability) of the material from which the ceiling / lamp shade is manufactured. At home, it is unlikely that someone will bother with such calculations. And in order not to create a dangerous situation, you should adhere to certain rules.
- Use low-power light bulbs that do not distinguish many heat. There are two options - "housekeeping" and LED. When choosing LED lamps, you will have to buy expensive, as you need lamps with good radiators - metal and ceramic, heat dissipating. This is far from cheap copies. It can consist that they emit smooth light and have a very long service life (in theory, several dozen years).
Before making lampshade do it yourself, think about security
- If possible, use ceramic, not plastic cartridges. They better get warm.
- Do not have flammable materials (paper, cardboard, cotton and synthetic fabric) closer 5-7 cm to the lamp.
And in general, making a lamp and installing it, in the first few days, pay attention to whether there is a ceiling. Heating is considered to be any increase in temperature above the environment. If the ceiling is felt like "warm", change the light bulb into less powerful. Check again. So as long as the homemade lampshade will not warm up.
Where to get a frame
If you want to remake the old lamp, the lamp, the brain, whose old lampshade has come into disrepair, you can simply use the existing foundation, having funned the old material. Before starting work, look good for the framework, if there is a rust somewhere or damaged coating, can it stand everything and paint again? At the same time, the color can be changed. If there are no old frames, you can buy an inexpensive lamp (in the store or on the flea market) and make the same operations with it. Not bad lampshades can be done from baskets for garbage. They are wire, there are plastic. The main thing is to find suitable in shape and size. Then you make a hole under the cartridge. Next - it's a decoration / trim, and here the sea options.
Homemade lampshades are affected by a variety of forms and materials
If this method is unavailable, you can make a lamp shade without a frame (there are such) or make a frame yourself. Material for making frame for lampshar do it yourself. It is: wire, wood (wooden or bamboo sticks, cut specially elements), plastic bottles.
How to make a frame for homemade label from wire
Wire for a lamp frame is needed aluminum or steel. With aluminum work easily, but it is easy. This is not very important when the lampshade is already exploited, but this fact must be taken into account during operation: you can spoil the form. On the other hand, such plasticity allows you to easily and simply make changes to the form. So the option is not bad. Aluminum wire can be "mined" from electrical cables. We will have to remove the protective shell and can be used.
Stall wire more elastic, so it retains the form well. It can be searched in the construction market. Work with her more. It is desirable that there were strong men's hands nearby.
Form of lampshades that can be made with their own wire
In addition to the wire for work, powerful plugs and passage will need. The lamp shade usually consists of two rings and connecting their racks. From the size of the rings and shapes of the racks depends on the form of the future lampshar. Questions may arise by the number of racks and ways to fasten them. The number of racks depends on the size of the rings and how much "round" you want to make a lampshade. The more racks, the more "smoothly" the fabric will fall. So choose to you, but the optimal distance between the racks along the lower circle is about 5-6 cm.
Receptions for creating a wire label
Molding methods The stack to the rings of the lampshar depend on the thickness and type of wire, as well as from your tools you have. The easiest - to make a small hook on the end, then clamp it tightly. And so that the ring does not slide right-left, pre-wire in the place of attachment to treat sandpaper with large grain. This is an option for thick aluminum wire. If steel wire, with a diameter of 1.2-2 mm or more, the best way is welding. Wirestone can be cut and wind around the ring or also make a hook.
If you make hooks, wed up the wire, the appearance is far from such an ideal, like factory frames. But this imperfection will be covered by the lampshade itself. If she is still worried, find the ribbon of suitable color (usually pick up the aboire color) and carefully wrap the resulting frame. Will be much better. The ribbon can be labeled with PVA and, wet, tight, twice behind the turn, wrap the frame.
From wire mesh
If you can find a thin wire mesh, you can quickly make an almost perfect cylindrical plander for a flooring, a table lamp, a night light, a ceiling for installing a candle, etc. Total and it is necessary that cut off a piece of mesh of the desired length and width, roll into the ring and fasten the wires, wrapped them around the racks.
Cylindrical framework for lampshar made of wire mesh
So that the grid does not straighten up, cutting off the piece, cut the long free ends from both sides. They will fasten the cylindrical shape. And the imperfection of the upper and lower rings can be masked with the ribbon of the desired color.
From five-liter plastic bottle
An interesting form of lampshade can turn out of a plastic bottle of large litter. There are bottles of 5-6 liters and even on 10. Here you can use them. From the tank, cut off the tops go to the bottom - depending on what you like more. In the cut part we make a ring under the cartridge. If the upper part is cut, the neck can be used for some cartridges. For those more diameter, it will have to cut.
Plastic bottle
Then cut out extra plastic, forming the rim and racks of the ceiling. To not be mistaken, you can pre-draw all lines with a marker. Cut will be easier. VCE elementary. Next we just decorate. And yes, cut plastic necessarily, otherwise there will be no warm air to go.
We make lampshades on the frame
Options for how to make the case of the lampshar sufficiently:
- Sew from fabric.
- To tie. Crochet or knitting needles.
Tie a case on lampshade can be knitted or crocheted
- We brake threads, twine, ropes.
- Emboss with the help of ribbons.
From tapes
The easiest and fastest way to transform an old lamp shade for a flooring or desk lamp is to use ribbons. Need a frame or lamp shade in the form of a cylinder. It can be "naked" or covered with cloth. If you use a "naked" frame, the light will break through the slots, which will create interesting light effects, but the lighting will be inhomogeneous. You are uncomfortable to read with such a light - this is an interior solution. If you need smooth lighting, first cover the frame to the cloth. It can be the same color that the tapes, on a couple of tones darker or lighter, can be contrasting. It all depends on your desire. And remember that the darker there will be a cloth, the smaller the light skips the lampshade.
Take the tape with a width of 1-2.5 cm. I fix it from the wrong side of the lampshar with the help of PVA glue, additionally fixing the pin. If we took a wire frame without fabric, fastened to the upper or lower line (you can sew your hands, you can use glue). Then we start wrapping the entire frame, from top to bottom, placing the ribbons close to each other, but without an adhesion.
How to make with your hands label from ribbons
Having finished the circle, we turn the ribbon to 90 °. Fix in this position (needle with a thread or plow glue, glue from the gun, fixing the temporarily pin, pressing the clothespin). Further ribbon we skip under the first ribbon, pull out, put on top of the second, then stretch down again, pull up through one tape. So, gradually, we create a weave, filling the entire lampshade.
Alternatively, you can skip two vertical tapes. But then it is necessary to ensure that each next row is shifted by one cross. Then it will turn out another type of weave. Such a lampshade is ideal for flooring, as it will go down the light, the dispersion through the walls will be small.
This technique is very plastic and allows you to get different results.
In this embodiment, the tapes may be the same, can - one color, but of different textures, may differ on a couple of tones or be contrasting. In a circle, the tape can be allowed solid, and it is possible - after a certain distance. If you find a wide ribbon and impose it with the overe, then there will be no horizontal at all. And if you use a braided or twisted cord (on the bottom photo on the right), we get a completely different type of lampshade. So only this technician finishing the lampshar gives a lot of options.
Interesting options
Briefly imagine ideas. There are many options for how non-standard ways to make standard frameworks for lampshades. The first method was already voiced: you can connect the case on the lampshade on the needles or crochet. Several options in the photo.
Crochet-knit lamps for bedside lamp
Knit separately fragments that are attached to the framework
Several types of knitted lamps
Not everyone can knit. It is easier to work with beads, especially if it is glued. You can decorate the old fabric using beads, sequins, beads of different shapes and sizes. Such a "new-old" lamp shade do it in a couple of hours. We pick up suitable decorations, scrub the fabric with PVA glue, stick decorations. To complete the image, you can collect suspensions from beads and beads, which are attached to the lower line, but it is already painstaking work. Although the effect is interesting.
Update lampshade can be updated with beads, beads, sequins
You can sew a new label of fabric. But it is not necessary to make it updated copy of the old. It should be included fantasy! If the lamp or floor lamp stand in the girl's room, the new case on the lampsur can be made in the form of a skirt. Select the style of the skirt yourself. It is interesting to look into the fold. With ruffles and without.
Wear a desk lamp in the skirt)))
In the boy's room you can use the old geographical map. They are on dense paper. If the paper is not sufficient enough, you first need to stick the card to the cardboard, and then from such a blank glue the lamp shade.
You can use geographic maps
Original plaffers are obtained if the finished frame shakes the threads or ropes. Ropes can be natural. In this case, they are gray, brown beige. You can find fine synthetic colored cords. Of these, it will turn out more "fun" in the color of the product. It is even easier for the case with threads for knitting. They are thin, thick, textured, with a smoothly changing color. In general, mass options.
We take the frame and according to a certain scheme of its soaring. You can start with racks. Each rack with a pigtail (the length of the threads should be 3 times more than the height of the rack). When this work is over, start stretching the thread / rope between the racks. They will need to pass through the pigtails, so that with threads are more convenient to do it with the help of a needle, and the ropes can be turned on and so.
Several ways to label frame threads
The second option - first empty the horizontally the entire frame, and then lay the rack. The pigtail will not succeed here, you just need to fasten the turns on the rack with a certain slope. This version performed is somewhat simpler, but the "pigtails" look more decoratively.
Homemade beams without frame
Many materials are tough enough to keep the shape on their own and, at the same time, they are enough plastic to make something interesting from them. There are a lot of such homemade lampshads. And almost all of them cost your attention. We only give a part here, the other part will go in the photo section (see below).From knitted lace napkins
Crochet-knit napkinsome have many and lie in the "honeycomb", as it is a pity to throw out, and they do not know how. There is a very interesting idea - make from them a lampshade for chandelier on the suspension. In addition to napkins, you need a large balloon or inflatable ball, glue for heavy wallpaper (vinyl, silk-screen printing, etc.), brush.
This charm can be made from lace napkins.
Machine glue according to the instructions, we wait until I fell. I inflate the ball or take the ball, hang. When the glue is ready, on some clean surface we lay the napkin, we wash it with glue, lay out on the ball.
Operating procedure
It is necessary to lay out with such a condition that the center will remain in the center. One by one we glue the napkin. It is necessary to lay out so that the edges overlap a little. When all the napkins are laid, once again we wash them with glue and leave up to dry. When the glue is dry, blow the ball or ball (the ball can be pierced if not sorry) and take it out through the hole. That's all, lace abazhur is ready.
Finishing steps
In some cases, there are problems with the way ready-made lampshade to hang on the cartridge. The problem is solved simply - take a transparent plastic bottle, cut off her neck, if necessary, expand the hole to the desired dimensions (so that it is tightly put on the cartridge), then cut off the plastic so that it turns out a ring of 5-7 cm wide. This ring is width And from the inside the ball is lining to the lampsuit.
Round rafones from threads
In almost the same technology, you can make round and semicircular stylish plaffones. Choose a fracture color. Their composition is absolutely unimportant - the color, thickness and texture is important. They can be shaggy, smooth, twisted, fond and thoroughly. The appearance depends on this. It is most convenient to work with cotton threads of medium thickness. They absorb glue well and then, after drying, hold the shape perfectly.
Need a ball, glue and thread
You still need a ball or a ball. It will be the basis of the lampshar, which sets the form. The size of the base is as desired. Threads need to glue, for this you will need PVA glue. It is transferred to the container, diluted with water in proportion 1: 1.
You can use another glue. It is important that it becomes transparent after drying. This is WB-29 TYTAN PROFESSIONAL and D2 glue for carpentry work. If you use some of these types of glue, read the instructions.
On the ball or bowl, draw a circle that will be slightly smaller than the lamp cartridge. On the opposite side, we draw a more circumference - it will be the bottom edge of the ceiling. Now everything is ready, we can proceed.
We wake the thread moistened in the glue, leaving the holes
We wash the thread by glue and wake them on the ball in chaotic order. It is more convenient to do this if the glue is poured into the container - you can lower all the modes, and just pull the thread slowly. With glue in a tube, everything is not so comfortable: it is necessary to miss areas length up to meter, wind, wrap again. Time leaves much longer. This is if used not pva. But the products are obtained more rigid and do not sag, do not change the form over time, as it can happen to the nietary lampshades on PVA.
When winding threads on the ball, diligently go around drawn circles. If accidentally climbed to the "Forbidden territory", simply put the threads, forming a smooth (more or less smooth) edge. When the threads are completed or you decide that the density is enough, the process can be stopped. The edge of the thread is refueling between others. Everything. Further, the ball with wound threads once again we wash the glue (PVA can be poured) and leave to drying (at least 2 days). To do not ride the ball, we find a bowl or a saucepan and use it as a stand.
Depending on the threads, we get different lamps for suspended lamps
The last stage - blow the ball or ball. If the ball has nipple, press it with a thin wire, releasing air. Having embarrassed the ball. On this, everything can be traded inside the lamp and test the lampshade.
The technology is the same, but the appearance is very different ...
According to the technology described above, you can make not only round beams. Rectangular, triangular, trapezoidal. Choose the foundation that is easy to remove, wind the thread moistened in the glue, braid, even stick, newspaper tubes, etc. After drying, you delete the foundation and so, you made the lampshade with your own hands. A couple of examples in the photo below.
If you take the cord, wash with glue, fold the snake from it and wait until it dries, it will turn out to be completely different in view of the type of ceiling / lampshar
From thin plastic or cardboard, wrapped by the food film we make a cylindrical smell of threads
And you can also use sticks .... Only the ball also wrap the food film and use the PVA not glue, but a transparent joiner
This is a pasty polymer clay in a tube, which was applied to a package from under milk, then dried and the package was removed ...
Creative homemade beams for lamps, lamps and chandeliers
Just the diva is given, from which only people do not make beautiful and unusual things. Plafof from a cup, grates, bottles, beer or glass jars, metal parts and rings from beer cans ... it seems you can use everything ...
Ideal for Loft style
Abazhur from the old sieve ... stylish
Are there old slides and cameras? Make a unique lamp for a photographer!
Better you will not come up with: Plafones for chandeliers in the kitchen of cups
Candlesticks turn into a lamp ... can be without landscair
Only spill donles and exclusive plaffones for a stylish ceiling lamp ready
That would never have come to mind that beer banks and bottles can be used as plafones
Another option for the loft
Mile and extraordinary
In thin plastic to do curly holes - beautiful lampshade for night light ready. Getting tired - you can do another
In life, you will not say, but these plafones are made of hooks, which open metal cans for drinks and canned food ... If you paint them, it will be even more interesting
Collapse from the paper tube and fold the plafof - a cool idea
Are there banks of stained glass? Plafones on the chandelier in the kitchen
Who would have thought it would look so
Do not know what to do with granny crystal? Make plafoons from it ...
Article on the topic: If laminate creaks after laying: reasons, decision