Kowane gida na gida ya san cewa kyawawan kayan ɗaci zai iya zama lokacin da aka yi shi da hannuwanku. Babu wani karamin abu a nan, saboda haka ba zai iya sauƙin yin kujera daga dsp tare da nasu hannayensu ba, amma sakamakon zai faranta masa rai.
Canja na'urar na'urar.
Ayyukan shirya
Kayan aiki da kayan:
- LDS-20 mm;
- electrollik;
- Caca;
- fensir;
- Bar 50 * 40 mm;
- goge lebur;
- maganin antiseptik;
- Sandpaper.
Katako-chipboard shine mafi kyawun abu don yawancin nau'ikan kayan ɗakin. Suna da kyawawan fasali mai ban sha'awa:
- Alamomin jiki. Wajibi ne a yi aiki mai sauƙi da sauri, ban da, alamar amincin yana da girma sosai. Kadai ne kawai shine rashin iya haifar da sakamako mai kaifi (banbanci masu ƙarfi), amma tare da isasshen aiki, wannan debe ba mai rauni bane.
- Kayan zane. Layin da murhun mai da zai iya samun launi kamar yadda ubangiji zai fi so.
- Kiyayewa. Cikakken glued haƙarƙarin haƙora ne tare da kwakwalwan kwamfuta daga ma'amala tare da muhalli, godiya ga abin da kayan yake nufin rashin yarda.
Kayan aikin don yin kujera.
Ana iya amfani da Chipboard Archair a matsayin kujera da gado, kuma kujera za ta zama tsayi tsawo, kuma gadonta zai zama matsakaici, kuma gado yana da matsakaici, sauran yana da inganci. Irin wannan hanyar ba za ta yi wani abu mai rikitarwa ba, amma idan ana so, canje-canje a zahiri suna yiwuwa.
A farkon farko, kuna buƙatar tsara Sawcking Chipboard don nan gaba tare da ɗimbin kujeru-kujeru:
- LDSP 90 * 70 cm - 3 sassan;
- Bar kilomi 23 cm - 4 yanke;
- BAR 65 cm - 2 yanke;
- Bar 70 cm - 6 cuts;
- Bar 90 cm - 6 cuts;
- Cm 60 cm - 6 cuts;
- Bar 95 cm - 1 yanke;
- Bar 50 cm - 2 yanke;
- Brunk 30 cm - 3 yanke.
Yana tare da wannan kayan da duk sauran ayyukan za a gudanar. Dole ne a yanka ɓangaren, don haka ba lallai ba ne don tsabtace mai zaɓi.
Mataki na a kan batun: Yadda za a zana zane a baranda a kan baranda: Zabi varnish, impregnation, fenti, fenti
Sakamakon yankuna da yawa rubbed ta sandpaper, don kada ka cutar da hannayensu. Chiploboard ya ruɗe daga gefuna zuwa cibiyar don guje wa duk wani lalacewar waje ga laminate. A cikin wannan mataki, kuna buƙatar duk itacen don bi da maganin antiseptik a kan danshi da kwari. Wannan ma'aunin wajibi ne idan kana buƙatar tsawaita lokacin aiwatar da kujerar kujera.
Babban ayyukan aiki
Kayan aiki da kayan:
Harscnstery tsarin.
- electrollik;
- Chipboard;
- mashaya;
- Screwdriver;
- sukurori da sukurori;
- hinges nada da juyawa;
- kumfa;
- epholstery;
- SMAPER.
Wannan shine lokacin babban taron majalisa. Ya fara daidai a wannan lokacin lokacin da maganin antiseptik zai bushe gaba daya. A farkon wannan tsari, ya zama dole don murƙushe mai 4 (70 da 90 cm) a kowane farantin a kasan biranen, kuma saboda haka cewa haɗin gwiwa mai yiwuwa ne, ya zama dole a yanka yanka a ƙarƙashin digiri 45 . Ga abin da aka makala da farko, ramuka na karamin diamita an samo asali ne daga diamita, bayan wanda zai yiwu a gyara ƙirar da sukurori 25-30 cm.
Lokacin da manyan abubuwan suna shirye, kuna buƙatar tara tsarin tallafi don kamewar kai:
- Daidaici 2 Bar 6 cm an shimfiɗa, bayan abin da aka haɗa su a saman tare da yanke na 30 cm. Ana maimaita wannan hanyar sau 3.
- Duk sassan 3 suna da alaƙa da junan su 50 da 95 cm sandunan a tsayi na 20 cm sama da matakin bene. A sakamakon haka, ya zama daidai tsararren zane, wanda ya kasance a haɗa shi daga ciki.
1 Daga baya aka horar da garkuwa da garkuwa a cikin ƙirar tunani. Tsawon shine 20 cm sama da matakin bene, da kuma wuraren gyara wucewa ta kafafu a cikin kan kan huska (2 inji mai kwakwalwa.). Don ingantaccen scecked, ana amfani da madaukai na talakawa wanda ba zai haifar da maƙarƙashiyar kayan ba, kuma a lokaci guda za ta samar da hanawa kyauta a wurin sa.
Domin lokacin da aka rage ƙirar, ƙirar ta tsaya a matakin da ake so a tsayin 20 cm, tubalan an shigar. Kuna iya aiwatar da su daga kusurwoyin galvanized (total 2 inji mai kwakwalwa.) Tare da filastik nozzles. Don gyara, zai ɗauki 2 sukurori ga kowane.
Mataki na kan batun: Yadda ake yin allo don baturi tare da hannuwanku
Sauran sassan biyu ana haɗe zuwa kafafu 2 (23 cm), wanda a cikin shigarwa zai kasance daga gaban kai na kai. Irin wannan wuri zai ba ku damar rarraba nauyin. Dutsen an yi shi a kan madaukai na talakawa, wanda zai rage tallafin a ƙarƙashin nauyin nasu lokacin sanya shi kuma daidai da wannan zaba lokacin da aka cajin.
Domin bangarorin don haɗawa da juna, zai dauki bitlesless. A loops tsakanin kan gidan kuma sashin tsakiya na tsakiya yana haɗe ne akan tsarin goyan baya), don tara shugaban na tsakiya, yana yiwuwa sanya kan shugaban. Bayan haka, ana hawa a ƙasa ƙafar ƙafa, wanda idan ƙara shi ya zama kafafun da ke ƙasa.
Kammala aiki
A qarshen, ya zama dole ga kowane yanki don saura batutuwa ko roba, sai a ɗaure tare da kowane zane mai kumburi, da kuma gyara gefen tare da mai stai na musamman. Headedboard ɗin an rufe shi daga bangarorin 2.
Dukkanin matakan kera kujeru-da suka wuce da sauri, don haka zaka iya fara da safe, kuma da dare za a gama samfurin. Kodayake mafi yawan lokuta yana ɗaukar kwanaki 2.
Tare da masana'anta mai inganci, wannan kayan kayan aiki za su yi aiki aƙalla shekaru 10, kuma idan an yi aiki daidai da 30.