The windows are an important part of any house, and they, as well as walls, floors, ceilings, need periodic repairs. How to paint wooden windows, what tools and materials for this will be needed, what rules must be observed when working? After all, high-quality painting will extend the service life, the frame and the dwelling will save from the penetration of insects and bacteria, improve the microclimate in the house.
Coloring compositions
Wooden windows are regularly subject to negative environmental impacts, be it rain, snow, wind, heat or frost. Therefore, they need permanent care. Rama will become more resistant to negative factors, if it is properly painted. And for this you need reliable quality paint.
Painting windows outside must be made every 1-2 years. Even the most high-quality coloring composition will not stand longer.
A number of requirements are presented to paint for windows:
- moisture resistance (moisture in the form of precipitation should not harm wood structures, the liquid contributes to the development of putrefactive processes, the formation of mold, which will significantly affect the health of residents of the house or apartment);
- Elasticity (the tree can give shrinkage, swell, but the coloring composition should remain as much during these processes).
As for the color, experts recommend choosing for windows located on the sunny side, light shades: the sun's rays, reflected from the frame, will not contribute to its drying.
For designs on the shadow side, dark tones may prefer.
Council
When choosing paints, focus on the tree of the tree, from which the frame is made, and climatic conditions in your area.
Oil compositions are used to process wooden structures in places with a mild climate. For weak wood, unstable to external influences, protective varnishes are used in addition to coloring compositions.
Article on the topic: Console sink (on legs)
Old wooden windows are best painted by glossy enamel, the distinguishing feature of which is the weather resistance. Such paint can be used both from the inside and outside.
Technology Painting
Despite the seeming simplicity of staining windows, so that your frames do not cut down literally after a few months, it is necessary to adhere to a certain technology.Preparation
First, you need to make a visual inspection of the window. To put in order all the closing mechanisms, to ensure a dense fit of the waterproof, fasten the discharged structural elements.
It is necessary to remove all the cracked and penetrated paint. If this is not done, then in such places when repeated staining, the old coating will begin to swear and burst.
Council
Puck the glass by painting scotch across the perimeter of the frames, so you protect them from paint, you will not have to carry out the tedious procedure for cleaning them; If the tape is not at hand, apply a soap solution on the glasses and wait until it dries.
Remove the old layers
Frames repeatedly painted, it is necessary to completely clean from previous coatings. To do this, you can use special compositions to remove paint (they are sold in construction stores). After applying, the scope of the old layers can be using a spatula. Or use the construction hairdryer: it will warm the paint, after which it can be removed by the same spatula.Council
Remove the coloring composition with a soldering lamp, but be extremely neat so as not to burn.
Grinding
It is necessary to carefully smear all the cracks with a putty for wood. After that, you can process the surface of the frames of large and finely abrasive emery paper.
If you skip this stage of work, then you can get an ugly rough rough surface after drying: fibers located on the frames will rise.
Padding
If, as a result of preparatory work, all the paint was removed from the frame or the wooden windows, you generally decided to paint the first time, then after grinding, the entire design is necessarily treated with a primer mixture. Thanks to this, the paint will hold longer.
Article on the topic: How to correctly calculate the number of wallpaper on the room
Painting preparation
The coloring composition must be diluted, since the thick layer of the composition cannot be applied exactly, there are influx, irregularities and, in the end, it quickly cracks. However, as a result of breeding, paint should not be similar to water consistency.Council
Experiment, take a little paint from the can in another container and dig it to the necessary state; What solvent it is to do, ask the seller.
Application
After the brush was dipped into the jar, it is necessary to spend each side of it on the edge of the tank - there will be surplus paint.
Council
Do not dip the brush completely in the jar, lower it on half the length of the pile.
You must first paint the outside of the frames first. Last but stain a window sill.
Wooden designs are treated in 2-3 layers. No need to strive to paint all the cracks and dents at a time. Remember, the thick layer of the coloring composition quickly cracks.
The first layer must be thin.
Council
Before applying a repeated layer, let's completely dry by the previous one.
If, as a result of painting, the disadvantages described above will break out, then they can be eliminated again by grinding.
The outer side of the frames as a result of systematic atmospheric impact needs more frequent staining. Processing the frame completely in color is absolutely optional. If a small portion of the paint layer on the frame is damaged, then you can remove the residues of the paint only from it, cover with primer, stick, paint, and additionally protect with varnish.
Paint a wooden window means to give the interior and the exterior of your home careful, finished view. Holding to the stages described above, it can be done quickly and efficiently.
We hope our tips will help you correctly paint your wooden windows and free yourself from working with them at least for the next two years.
Article on the topic: Siphons for shells: species, features of choice and installation