Today, the smokehouse becomes popular in the garden plot and in a country house, along with mangals and barbecue. What the smokehouse is not a tricky construction in which with the help of warm smoke you can cook delicious and fragrant smoked fish, meat, poultry, cheese, etc. To date, there are many options and designs of smoke settings and devices, but no matter how they did not distinguish the principle of them alone - the processing of products smoke. The only difference is the temperature of the supplied smoke in the smoke cabinet; Cold to 30 degrees, warm to 50 degrees and hot up to 90 degrees. Their designs are so simple that everyone under the power to make smoking with their own hands.
Construction of smoking
For the construction of such a smoke, hollow concrete blocks are used, they can be replaced by the same slag blocks and the like. The location is chosen on a land plot with a small bias. By placing the necessary sizes, dig up the land under the base of the smoke cabinet, chimney pipe and fireboxes. For chimney, a concrete pipe is used, a length of 1.5 meters and a diameter of 25 centimeters.
The base of the oven we build from the same blocks, we weld under the furnace from metal squares and reinforcement a stand according to the type of chicks.
Twisting a wooden square or a rectangle as desired, this will be the foundation for the further construction of the smoke cabinet. Fix it with corners or plates to concrete blocks and fill the emptiness of the blocks with cement mortar, as close as possible and above about half a centimeter of a wooden frame. This will avoid an excessive leakage of smoke. Simultaneously with this, the bottom of the site is equal.
We raise the walls of the furnace, put the concrete tile as the overlap for the furnace and pour everything with cement mortar.
The next step is installation of a wooden frame. The frame is collected from a bar with a cross section of 5x5 cm., Metal connecting corners and woodless tapes.
Article on the topic: Cork wallpapers for hallways
The lower longitudinal bars are attached to the cabinet frame and metal stands fixed to the oven overlap. The roof of the entire design is duplex by the type of alpine chalet.
The inner walls of the smoke cabinet are caught by clapboard from hardwood wood, it is resistant to the temperature and does not have a resin in its structure. The ceiling is clogged with the same clap, we cut the hole under the oven chimney and secure it.
In the walls for maintaining heat, we put mineral wool and we are wearing the wallpaper outside. For this purpose, it can be used and coniferous lining it is an order of magnitude cheaper deciduous.
I make a roof from a wooden tile (Schindel, shingle), it looks very beautiful and it is also not difficult for her own hands. The attic part of the cabinet is covering the hydro film, you nourish the crate on it and they are placed on it.
Turn the door and hit the floor under the warehousing wreck.
We cover the entire wooden design and roof by a vico with varnish.
Smoking is ready to use. Having joining the products in the smoke cabinet, it remains only to be slaughtered the furnace and wait for readiness.